GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - HMI |
Product Type: | HMI / Operator Interface |
Part Number: | 2711-T10G8 |
Series: | Panelview 1000 |
Description:
Part number 2711-T10G8 is a PanelView 1000 operator terminal. This terminal was manufactured by Allen Bradley. This device is equipped with a touch screen display that is monochrome and has a display area of 211 mm x 158 mm. This terminal has a DH+ communication port, as well as an RS-232 printer port. the operating voltage range of this PanelView 1000 operator terminal is 85 to 264 volts AC. It has an operating temperature that should range from 0 to 55 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 2711-T10G8 is a modern operator terminal and is a part of the Allen-Bradley / Rockwell Automation PanelView 1000 Series. It is fitted with a 10.1-inch grayscale touch display that gives the user a simple and interactive experience. The touchscreen module has 384 touch cells that enable clear and accessible information input. A non-volatile memory unit and RAM are also an integral part of the terminal package and can be used for storing applications. The terminal is equipped with 1008 kilobytes of memory which gives ample space for storing applications. The operator terminal takes an input of 85 to 264 Volts of alternating current. This makes the terminal ready for unpredictable drops and rises in the power supply. The terminal can be connected to the computer using the in-built RS-232 port. This port can also be used to connect to a printer and can print terminal logs. It is also equipped with a DH+ port which can be used to connect to a PLC-5, SLC 5/04, or ControlLogix controller on a DH+ link. The DH+ network can be used to provide feedback to the user regarding the operation of the system. The terminal is also fitted with red and green status indicators that help the user to quickly identify problems within the system.
The Allen-Bradley PanelView 1000 series of operator terminals includes the 2711-T10G8. It is a touch screen module equipped with 384 touch cells that enables simple data entry. The 2711-T10G8's physical dimensions measure 282 millimeters x 370 millimeters x 112 millimeters. This screen is a monochrome display with a display area of 211 millimeters by 158 millimeters. Additionally, this touchscreen operator terminal is equipped with a Data Highway Plus (DH+) communication port, as well as an RS-232 printer port. The 2711-T10G8 communicates through a Data Highway Plus (DH+) interface that supports networked topologies. DH+ is an aging protocol that is primarily supported by Allen-PLC5 Bradley's and SLC500 controllers. CompactLogix and ControlLogix controllers, through DHRIO modules and partner adapters, also support this protocol.
The 2711-T10G8 is customized using various operating systems and applications. This program includes embedded visual libraries, as well as tools for accurately representing the machine or process's control and measurement regions. Additionally, it has testing and debugging capabilities and allows for the setup of the HMI program without requiring access to the underlying hardware. The terminal is housed in a rugged NEMA Type 12/13 or 4X container that is suitable for indoor usage. This Allen Bradley operator terminal should be operated within an environment where the temperature ranges from 0 to 55 degrees Celsius, or the equivalent temperature range of 32 to 131 degrees Fahrenheit. When storing this device, the temperature range of the surrounding area should be -40 to 85 degrees Celsius, or -40 to 185 degrees Fahrenheit.
Brand | Allen-Bradley / Rockwell Automation |
Series | PanelView 1000 Grayscale Terminals |
Part Number | 2711-T10G8 |
Display Size | 211 x 158 mm (8.3 x 6.2 in.) |
Pixels | 640 x 480 |
Weight | 3.00 kg (6.6 lbs) |
Display Color | Grayscale |
Input Type | Touch Screen |
Communication | DH+ and RS-232 Printer Port |
Total Application Flash Memory | 1008 kB (application screens) |
Operating temperature | 0° to +55°C (+32° to +131°F) |
Storage temperature | -25° to +70°C (-13° to +158°F) |
Shock (operating/nonoperating) | 15 g/30 g |
Vibration (operating) | 2 g up to 2,000 Hz |
Input Power | 85-264V AC |
Question: Does Automation Stop offer repairs on the 2711-T10G8?
Answer: Yes. We offer repairs for the 2711-T10G8 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - HMI and 2711-T10G8?
Answer: If you buy the 2711-T10G8 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2711-T10G8 online?
Answer: Yes. Automation Stop sells the 2711-T10G8 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2711-T10G8?
Answer: The 2711-T10G8 is made by Allen Bradley - HMI.
Question: What type of product is the 2711-T10G8?
Answer: The 2711-T10G8 is part of the Panelview 1000 series.
Question: What Brand is included with the Allen-Bradley 2711-T10G8?
Answer: The Allen-Bradley 2711-T10G8 has a Allen Bradley / Rockwell Automation Brand.
Question: What is the Communication of the 2711-T10G8?
Answer: The 2711-T10G8 has a Communication of DH+ and RS-232 Printer Port.
Question: What Display colored is included with the 2711-T10G8?
Answer: The 2711-T10G8 has a Grayscale Display color.
Question: What Display Size does the Rockwell Automation 2711-T10G8 have?
Answer: The Display Size of the 2711-T10G8 is 211 x 158 mm (8.3 x 6.2 in.).
Question: What is the Input Power of the 2711-T10G8?
Answer: The Input Power of the 2711-T10G8 is 85-264 volts alternating current (AC).
Question: What Input Type is included with the Allen Bradley Automation 2711-T10G8?
Answer: The Allen Bradley Automation 2711-T10G8 has a Touch Screen Input Type.
Question: What is the Operating temperature of the 2711-T10G8?
Answer: The Rockwell Automation 2711-T10G8 has a Operating temperature of 0° to +55°C (+32° to +131°F).
Question: What is the unit Number of the Allen Bradley-Rockwell Automation 2711-T10G8?
Answer: The component Number of the Allen Bradley-Rockwell Automation 2711-T10G8 is 2711-T10G8.
Question: What Pixels does the Allen Bradley Automation 2711-T10G8 have?
Answer: The 2711-T10G8 has a Pixels of 640 x 480.
Question: What Shock (operating/nonoperating) does the Allen Bradley Automation 2711-T10G8 have?
Answer: The 2711-T10G8 has a Shock (operating/nonoperating) of 15 g/30 g.
Question: What is the Storage temperature of the 2711-T10G8?
Answer: The Allen Bradley Automation 2711-T10G8 has a Storage temperature of -25° to +70°C (-13° to +158°F).
Question: What is the Total Application Flash random-access memory (RAM) of the 2711-T10G8?
Answer: The Allen Bradley/Rockwell Automation 2711-T10G8 has a Total Application Flash random-access memory (RAM) of 1008 kB (application screens).
Question: What Vibration (operating) does the Allen Bradley Automation 2711-T10G8 have?
Answer: The Allen Bradley Automation 2711-T10G8 has a Vibration (operating) of 2 g up to 2,000 Hz.
Question: What is the Weight of the 2711-T10G8?
Answer: The 2711-T10G8 has a Weight of 3.00 kg (6.6 lbs).
For additional information about 2711-T10G8 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711-T10G8.
Revision Part # | Also Known As | Availability |
---|---|---|
2711-T10G8/A | 2711-T10G8 Ser A, Series A, Rev A | Request a Quote |
2711-T10G8/B | 2711-T10G8 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.