The 2711C-T6T from Rockwell is a panel for industry from the PanelView Component line. The user may easily send commands to the HMI with its touch-screen UI. The panel must not be exposed pulses above 2 g at 500 hertz. The heat dispersion of the panel should be 9.4 watt. The 2711C-T6T is equipped with a 4.53 inches wide and 3.39 inches tall color transmissive TFT active matrix screen. A significant condition to ensure the proper safety of the operator terminal is ventilation. The operator must guarantee enough space within the enclosure and acknowledge additional systems in these considerations. The temperature of the environment near the HMI has to stay in the following range: 32… 122 degrees Fahrenheit while the module is turned on and shall be in the range from -25 to 70 degrees Celsius while the terminal is stored. The operator could simply connect other devices, such as PLCs, to the Human-Machine-Interface exploiting its Ethernet slot. A path needs to be designed to make sure to be able deal with troubleshooting, wiring and maintenance activities. The device permits the utilization of a memory card in order to download or backup HMI programs. The top hit that the system may tolerate is 15 g in operating settings and 30 g while the operator terminal is shut down. This development environment runs on different Microsoft Operating Systems.

2711C-T6T is a PanelView Component C600 terminal by Allen-Bradley. For low-level applications with a serial connection, this component-level operator interface provides a control and visualization solution. Web application creates Human-Machine Interface (HMI) applications while your computer is connected directly to the terminal. The direct result shows on the terminal display without having to download it first. It has a size of 8.23 x 6.0 inches with an active display area of 4.53 x 3.39 inches. It has 5.7 inches of Color transmissive TFT active matrix LCD with a resolution of 320 x 240 pixels, an analog touch for input with an actuation rate of 1 million presses, and a non-replaceable blacklight with a minimum of 40,000 hours of life with a white status indicator. It has an input voltage range from 18VDC to 30VDC with a nominal value of 24VDC, maximum power consumption of 10 watts, and heat dissipation of 32 British thermal units (BTU) per hour. It has an Ethernet port that supports a connection to a computer for application and design communication to a controller. It has a multipurpose RS-232 port which supports DF1 full-duplex communication with controllers using direct/modem connection, and DH-485 communication through a serial connection. Preferred controllers are MicroLogix, SLC, and Micro800. It also has an RS-485 port that supports point-to-point communication, a USB device port for maintenance or programming only, and a USB host port to power USB peripherals. It is connected to a browser using a USB port. Install the Allen-Bradley PanelView USB remote NDIS Network Device driver before connecting your computer to the USB port of the 2711C-T6T. It has internal storage, a USB flash drive, and an SD card for memory options.