GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2711P-K4C20D

✓ In Stock

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711P-K4C20D
Series: PV Plus 400

Description:

Part number 2711P-K4C20D is a PanelView 400 operator terminal. This device was designed and manufactured by Allen Bradley / Rockwell Automation. This terminal has a 3.5-inch display that is capable of displaying color. It is equipped with a keypad which is used for operator input. This terminal has an Ethernet port and an RS-232 port for communication purposes. This terminal has 256 MB of RAM, as well as 512 MB of non-volatile flash memory.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 2711P-K4C20D, which is an operator terminal, was produced by Allen Bradley as a part of the PanelView 400 series of products. This Allen Bradley unit has a three-point-five (3.5)-inch display that is capable of displaying colored graphics. This terminal is equipped with a keypad that users can use to input data, commands, and other things. This operator terminal has an Ethernet port, as well as an RS-232 port, which are used for communication purposes. Additionally, this terminal is equipped with USB device and host ports. This terminal has a rated input power range of 18 volts DC to 30 volts DC. the 2711P-K4C20D operator terminal has an available memory consisting of 256 megabytes (MB) of RAM (random-access memory), as well as 512 megabytes (MB) of non-volatile flash memory. Approximately 73 megabytes (MB) of memory is free for user memory. This terminal was designed to be operated in an environment where the temperature ranges from 0 to 55 degrees Celsius, or the equivalent range of 32 to 131 degrees Fahrenheit. The non-operating, or storage, temperature range suitable for this operator terminal is from -25 to 70 degrees Celsius, or -13 to 158 degrees Fahrenheit. Additionally, the relative humidity that is suitable for this device should have levels that range from 5 percent to 95 percent. Furthermore, the relative humidity should be non-condensing. This terminal can withstand an operating shock rated up to 15 G for 11 milliseconds. Additionally, this terminal can also withstand a non-operating shock rated up to 30 G for 11 milliseconds.

Technical Specifications

MPN 2711P-K4C20D
Manufacturer Allen Bradley / Rockwell Automation
Series Panelview Plus 400
Input Type Keypad
Display Type Color
Display Size 3.5 in
Resolution 320 x 240
Power DC
PCI Max 11 W
Battery Life 5 years min. at 25 °C (77 °F)
Clock Battery-backed, +/-2 minutes per month
Operating Temperature 0...55 °C (32...131 °F)
Heat Dissipation 85 BTU/hr
Backlight LED
Communication Ethernet, RS-232, USB
External CompactFlash Storage 512 MB max
Input Voltage -
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711P-K4C20D?

Answer: Yes. We offer repairs for the 2711P-K4C20D and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-K4C20D?

Answer: If you buy the 2711P-K4C20D through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711P-K4C20D online?

Answer: Yes. Automation Stop sells the 2711P-K4C20D online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711P-K4C20D?

Answer: The 2711P-K4C20D is made by Allen Bradley - HMI.


Question: What type of product is the 2711P-K4C20D?

Answer: The 2711P-K4C20D is part of the PV Plus 400 series.


Question: What Backlight does the 2711P-K4C20D have?

Answer: The Rockwell-Automation 2711P-K4C20D has a LED Backlight.


Question: What is the Battery Life of the Rockwell-Automation 2711P-K4C20D?

Answer: The Battery Life of the 2711P-K4C20D is 5 years min. at 25 °C (77 °F).


Question: What is the Clock of the 2711P-K4C20D?

Answer: The Clock of the Allen Bradley/Rockwell Automation 2711P-K4C20D is Battery-backed, +/-2 minutes per month.


Question: What Communication does the 2711P-K4C20D have?

Answer: The Communication of the Allen Bradley-Rockwell Automation 2711P-K4C20D is Ethernet, RS-232, USB.


Question: What is the Display Size of the Allen Bradley 2711P-K4C20D?

Answer: The Display Size of the 2711P-K4C20D is 3.5 in.


Question: What Display Type is included with the 2711P-K4C20D?

Answer: The Allen Bradley-Rockwell Automation 2711P-K4C20D has a color-supporting Display Type.


Question: What is the External CompactFlash Storage of the Rockwell-Automation 2711P-K4C20D?

Answer: The External CompactFlash Storage of the Rockwell-Automation 2711P-K4C20D is 512 MB max.


Question: What is the Heat Dissipation of the 2711P-K4C20D?

Answer: The 2711P-K4C20D has a Heat Dissipation of 85 BTU/hr.


Question: What Input Type does the 2711P-K4C20D have?

Answer: The Allen Bradley Automation 2711P-K4C20D has a key Input Type.


Question: What Input Voltage is included with the 2711P-K4C20D?

Answer: The Allen-Bradley 2711P-K4C20D has a - Input Voltage.


Question: What is the Operating Temperature of the 2711P-K4C20D?

Answer: The Allen-Bradley 2711P-K4C20D has a Operating Temperature of 0...55 °C (32...131 °F).


Question: What is the PCI Max of the Rockwell Automation 2711P-K4C20D?

Answer: The Rockwell Automation 2711P-K4C20D has a PCI Max of 11 W.


Question: What Power does the 2711P-K4C20D have?

Answer: The 2711P-K4C20D has a DC Power.


Question: What is the Resolution of the 2711P-K4C20D?

Answer: The 2711P-K4C20D has a Resolution of 320 x 240.


Series information for 2711P-K4C20D

For additional information about 2711P-K4C20D check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-K4C20D.

Revision Part # Also Known As Availability
2711P-K4C20D/A 2711P-K4C20D Ser A, Series A, Rev A Request a Quote
2711P-K4C20D/B 2711P-K4C20D Ser B, Series B, Rev B Request a Quote
2711P-K4C20D/C 2711P-K4C20D Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • 2711P-K4C2OD
  • 271IP-K4C20D
  • 271IP-K4C2OD
  • 27I1P-K4C20D
  • 27I1P-K4C2OD
  • 27IIP-K4C20D
  • 27IIP-K4C2OD

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP