The 2711P-T6C20D is a PanelView 600 operator interface terminal manufactured by Allen Bradley/Rockwell Automation as part of the PanelView Plus 600 operator interface terminals series. This is a DC power operator interface terminal with an interface terminal voltage range of 18 – 24 volts DC. It also has an all-out power consumption of 25 watts. Like the other Allen-Bradley PanelView products, the 2711P-T6C20D operator interface terminal comes with features such as FTP server, ActiveX controls, VNC Client/server, PDF readers, and third-party device support. This terminal features a color display that makes data that it displays even more attractive, more precise, and easier to read. Allen Bradley 2711P-T6C20D operator interface terminal comes with a 5.7-inch stainless steel touchscreen, which acts as its primary input device. The user should use the finger or plastic stylus with this operator interface terminal's touchscreen for the input of data and information. If any other input tools are used, they may damage the touchscreen and render it unusable. The Allen Bradley 2711P-T6C20D interface terminal communicates with other devices through the RS-232, Ethernet, and USB communication ports. The operator interface terminal features an application flash memory of 20 megabytes for the storage of all the applications. This operator interface terminal can work in vibrating conditions of up to 57 hertz at a peak vibration level of 2G. It has an operating temperature ranging from 32 – 131 degrees Fahrenheit, non-operating temperature ranging between -13 and 158 degrees Fahrenheit. Generally, the PanelView Plus 600 Graphic Terminals comes with a 5.5-inch, flat-panel, color or grayscale display of 320 x 240 pixels resolution.

The Allen-Bradley 2711P-T6C20D PanelView Plus operator terminal has a 5.7-inch colored display and comes embedded with Ethernet, RS-232, and USB ports. For a better experience, this operator terminal comes with a touchscreen input interface. This PanelView visualization component from Allen-Bradley is a 24 volts DC-powered, touchscreen-operated device. It is most commonly referred to as a human-machine interface (HMI). It is used on the factory floor to provide operators with a convenient monitoring and control interface. The Allen-Bradley 2711P-T6C20D PanelView Plus operator terminal helps with lowering operational expenses and increasing accuracy. Furthermore, it also helps to increase efficiency and reaction time to the process. As operational details can be seen from a single location, the Allen-Bradley 2711P-T6C20D PanelView Plus operator terminal also helps with lowering the chances of human error. The Allen-Bradley 2711P-T6C20D PanelView Plus operator terminal is ideal for use within the panel or in slightly remote communication setups. As cable distance increases, this operator panel decreases the speed. The built-in Ethernet port supports communication with one or more controllers simultaneously. The built-in USB ports are used for the insertion of peripheral devices. The screen that can produce 18-bit color graphics has an effective viewing area of 15 x 86 mm (4.5 x 3.4 in.). The screen is lit by a white LED backlight that has a minimum expected life of 25,000 hours at 25 degrees Celsius (77 degrees Fahrenheit). The 2711P-T6C20D has an internal memory of 256 MB RAM and 512 MB nonvolatile memory, of which approximately 73 MB is free user memory.