GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - HMI |
Product Type: | HMI / Operator Interface |
Part Number: | 2711P-T7C4D8K |
Series: | 2711P |
UPC: | 10612598876843 |
Description:
Allen-Bradley's 2711P-T7C4D8K is a PanelView Plus 6 700 conformal coated terminal. It has a 6.5-inch color display with a touch panel for operator/user input. The terminal has a 100 to 240 volt input voltage and a maximum power consumption of 160 VA. The display has a CCFL backlight with a 300 Nits screen luminance and a resolution of 640 x 480 pixels. The terminal has Ethernet (Auto-MDI/MDI-X), RS-232, two USB host connectors, and an interface for optional communication modules.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2711P-T7C4D8K is designed for applications that need graphic monitoring, control, and visualization of data, letting operators immediately comprehend the status of their device. This terminal has the display (monitoring) module, logic module, and optional communication module, allowing for variable setup, installation, and upgrades. The display module consists of a color (active-matrix) thin-film transistor display with a display size of 6.5 inches (diagonally), a resolution (image/video) of 640 × 480 pixels, and an effective display area of 5.2 inches x 3.9 inches. The terminal also contains a one million presses actuation rate analogue resistive touch panel for interaction. The logic module contains an Ethernet port for controller connections, two high speed USB host ports for connecting external peripherals, and a serial RS-232 connector for communicating with logic controllers, printing (scanning), and transferring files. The 2711P-T7C4D8K has an internal memory of 512 MB RAM and 512 MB of nonvolatile memory. The terminal also supports an external SD card for additional storage. The module has reset buttons, status indicators, a real-time clock (with lithium battery for backup), and one peripheral component interconnect slot. Additional communication modules that expand communication capacity to Data High Plus/485, ControlNet (scheduled and unscheduled), and Ethernet networks can be linked through the network interface on the logic module. It has a max power demand of 70 watts, with an input voltage range of 18 to 32 VDC. All modules in this terminal are conformal coated. It has a lithium battery and CCFL backlight with a minimal life of four years.
MPN | 2711P-T7C4D8K |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | PanelView 6 Plus Terminal |
Input Type | Touch |
Display Size | 6.5 in |
Display Type | Color |
Communication | Ethernet, RS-232 & (2) USB |
Power | DC |
Question: Does Automation Stop offer repairs on the 2711P-T7C4D8K?
Answer: Yes. We offer repairs for the 2711P-T7C4D8K and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-T7C4D8K?
Answer: If you buy the 2711P-T7C4D8K through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2711P-T7C4D8K online?
Answer: Yes. Automation Stop sells the 2711P-T7C4D8K online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2711P-T7C4D8K?
Answer: The 2711P-T7C4D8K is made by Allen Bradley - HMI.
Question: What is the Communication of the Allen-Bradley 2711P-T7C4D8K?
Answer: The Allen-Bradley 2711P-T7C4D8K has a Communication of Ethernet, RS-232 & (2) USB.
Question: What Display Size does the Allen Bradley 2711P-T7C4D8K have?
Answer: The Display Size of the Allen Bradley 2711P-T7C4D8K is 6.5 in.
Question: What Display Type is included with the 2711P-T7C4D8K?
Answer: The 2711P-T7C4D8K has a color Display Type.
Question: What Input Type is included with the Allen Bradley/Rockwell Automation 2711P-T7C4D8K?
Answer: The 2711P-T7C4D8K has a Touch Input Type.
Question: What Power does the Allen Bradley 2711P-T7C4D8K have?
Answer: The 2711P-T7C4D8K has a DC Power.
For additional information about 2711P-T7C4D8K check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-T7C4D8K.
Revision Part # | Also Known As | Availability |
---|---|---|
2711P-T7C4D8K/A | 2711P-T7C4D8K Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.