GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2711P-T7C6A2

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711P-T7C6A2
Series: PV Plus 700

Description:

The 2711P-T7C6A2 is a PanelView Plus 700 operator terminal produced by Allen-Bradley. The terminal comes with a 6.5-inch color liquid-crystal display. The display screen is 3.9 inches (99 millimeters) in height and 5.2 inches (132 millimeters) in width, with horizontal and vertical display modes of 640 and 480 pixels, respectively. The terminal incorporates inbuilt touch technology for data input in the terminal. The 2711P-T7C6A2 requires an AC source of electricity with a voltage supply ranging from 85 to 264 volts and the ability to produce 160 VA, which is the terminal's maximum power consumption. This terminal has 128 MB of flash storage plus 128 MB of RAM and supports various communication protocols including RIO, DH+, DH485, Ethernet, USB, and RS-232.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$1,149.00

Available: 44

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$920.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 2711P-T7C6A2? We can help!

Request a Quote

Key Features:

  • utilizes 128 mb memory
  • is discontinued/obsolete
  • utilizes 8 lbs. of shipping weight

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

A part of the PanelView Plus 700 series, the 2711P-T7C6A2 by Allen-Bradley offers monitoring, controlling, and graphic visualization capabilities. This operator terminal has a modular structure (3 modules are present for this terminal) to give users the opportunity to customize the device to meet their own requirements. The display module contains a color resistive touch display. The active-matrix LCD panel, with a 640 x 480 resolution, has a diagonal dimension of 6.5 inches and an area (height x width) of 3.9 x 5.9 inches. The terminal has 128 MB of RAM and 128 MB of flash memory. The terminal supports a wide variety of communication interfaces, notably DH-485 (RS‑485 transmission standard), DH+, Ethernet, Process Remote I/O, RS-232, and USB. It has two USB ports, one Ethernet port, and one port for serial RS-232 communication, which is the recommended standard. These connectors link the terminal to SLC controllers, printers, and devices over IP. It also enables the attachment of external communication modules and memory extension modules that are used to improve communications as well as memory storage. An external CF (compact flash) card with a maximum of 512 MB can be attached to the logic module. The 2711P-T7C6A2 also includes a real-time clock facilitated by a lithium battery, which can be removed and replaced. It is operated via alternating current (AC) voltage sources with a minimum terminal voltage of 85 volts and a maximum terminal voltage of 264 volts. The terminal may take apparent power from the source of up to 164 volt-ampere. It includes an x86 Intel Celeron processor.

Technical Specifications

MPN 2711P-T7C6A2
Manufacturer Allen Bradley / Rockwell Automation
Series Panelview Plus 700
Input Type Touch
Display Type Color
Display Size 6.5 in
Resolution 640 x 480
Power AC
PCI Max 5 W
Battery Life 4 years min. at 25 °C (77 °F)
Clock Battery-backed, +/-2 minutes per month
Operating Temperature 0...55 °C (32...131 °F)
Heat Dissipation 240 BTU/hr
Backlight CCFL 50,000 hours life, min.
Logic Module 128 MB
External CompactFlash Storage 512 MB max
Input Voltage 85...264V AC
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711P-T7C6A2?

Answer: Yes. We offer repairs for the 2711P-T7C6A2 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-T7C6A2?

Answer: If you buy the 2711P-T7C6A2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711P-T7C6A2 online?

Answer: Yes. Automation Stop sells the 2711P-T7C6A2 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711P-T7C6A2?

Answer: The 2711P-T7C6A2 is made by Allen Bradley - HMI.


Question: What type of product is the 2711P-T7C6A2?

Answer: The 2711P-T7C6A2 is part of the PV Plus 700 series.


Question: What is the Backlight of the Allen-Bradley 2711P-T7C6A2?

Answer: The Backlight of the 2711P-T7C6A2 is CCFL 50,000 hours life, min..


Question: What Battery Life does the Allen Bradley/Rockwell Automation 2711P-T7C6A2 have?

Answer: The Battery Life of the Allen Bradley/Rockwell Automation 2711P-T7C6A2 is 4 years min. at 25 °C (77 °F).


Question: What Clock does the Allen-Bradley 2711P-T7C6A2 have?

Answer: The Allen-Bradley 2711P-T7C6A2 has a Clock of Battery-backed, +/-2 minutes per month.


Question: What is the Display Size of the Allen Bradley-Rockwell Automation 2711P-T7C6A2?

Answer: The 2711P-T7C6A2 has a Display Size of 6.5 in.


Question: What Display Type does the 2711P-T7C6A2 have?

Answer: The Rockwell-Automation 2711P-T7C6A2 has a colored Display Type.


Question: What External CompactFlash Storage does the 2711P-T7C6A2 have?

Answer: The Allen Bradley-Rockwell Automation 2711P-T7C6A2 has a External CompactFlash Storage of 512 MB max.


Question: What is the Heat Dissipation of the Allen Bradley-Rockwell Automation 2711P-T7C6A2?

Answer: The 2711P-T7C6A2 has a Heat Dissipation of 240 BTU/hr.


Question: What Input Type does the 2711P-T7C6A2 have?

Answer: The Rockwell-Automation 2711P-T7C6A2 has a Touch Input Type.


Question: What is the Input Voltage of the 2711P-T7C6A2?

Answer: The Input Voltage of the Allen-Bradley 2711P-T7C6A2 is 85...264 volts alternating current (AC).


Question: What Logic Module does the 2711P-T7C6A2 have?

Answer: The Logic Module of the 2711P-T7C6A2 is 128 MB.


Question: What Operating Temperature does the Rockwell Automation 2711P-T7C6A2 have?

Answer: The 2711P-T7C6A2 has a Operating Temperature of 0...55 °C (32...131 °F).


Question: What PCI Max does the Rockwell-Automation 2711P-T7C6A2 have?

Answer: The PCI Max of the Rockwell-Automation 2711P-T7C6A2 is 5 W.


Question: What Power does the Allen Bradley/Rockwell Automation 2711P-T7C6A2 have?

Answer: The 2711P-T7C6A2 has a alternating current (AC) Power.


Question: What Resolution does the Allen Bradley-Rockwell Automation 2711P-T7C6A2 have?

Answer: The Resolution of the 2711P-T7C6A2 is 640 x 480.


Series information for 2711P-T7C6A2

For additional information about 2711P-T7C6A2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-T7C6A2.

Revision Part # Also Known As Availability
2711P-T7C6A2/A 2711P-T7C6A2 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2711P-T7CGA2
  • 271IP-T7C6A2
  • 271IP-T7CGA2
  • 27I1P-T7C6A2
  • 27I1P-T7CGA2
  • 27IIP-T7C6A2
  • 27IIP-T7CGA2

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP