GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1326-CPB1-030

Manufacturer: Allen Bradley - Motors
Product Type: Drive
Part Number: 1326-CPB1-030
Series: 1326

Description:

The Allen-Bradley 1326-CPB1-030 is a power cable assembly compatible with servo motors in the 1326 series and the 1394 motion control system. The cable has a total length of 15 meters (49 feet). The maximum bend radius is 76 millimeters and the connector size is 43 millimeters. The maximum cable diameter is 14 millimeters or 0.5 inches.


Key Features:

  • has 460 volt ac of voltage
  • comes discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1326-CPB1-030 is an Allen-Bradley power cable assembly. This unit is compatible with servo motors in the 1326 series as well as the 1394 motion control system. This power cable is designed to operate with high-performance motion systems. It features a braided shield wire which reduces electrical noise by offering a high degree of electromagnetic shielding. This power cable has 3 wires for power, 2 brake wires, a GND wire, 2 thermostat wires, and one braided shield wire for a total of 10 wires. 9 connector pin-outs are included for connections to the terminals. Compatibility with the push/pull connector end of the 1326 series servo motors allows for a quick and simple installation process. Supported motor frames include the 1326AB-B4xx and the 1326AB-B5xx series of motor frames by Allen-Bradley. Supported drives include the 1391-DES or 1391B-ES series by Allen-Bradley. The cable has a total length of 15 meters (49 feet). The maximum bend radius is 76 millimeters and the connector size is 43 millimeters. The maximum cable diameter is 14 millimeters or 0.5 inches. The 1326-CPB1-030 power cable assembly package includes a standard power cable along with an installation kit. The installation kit includes a connector housing, 9 contact pins, a plastic insulation body, as well as an installation manual. The assembly is UL-listed and is compatible with in-line cable connections that conform to CE standards. Remote in-line connections are also supported by this power cable. The unit comes with an enclosure that is environmentally sealed and is rated IP65 for protection from harsh industrial environments.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1326-CPB1-030?

Answer: Yes. We offer repairs for the 1326-CPB1-030 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and 1326-CPB1-030?

Answer: If you buy the 1326-CPB1-030 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1326-CPB1-030 online?

Answer: Yes. Automation Stop sells the 1326-CPB1-030 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1326-CPB1-030?

Answer: The 1326-CPB1-030 is made by Allen Bradley - Motors.


Series information for 1326-CPB1-030

For additional information about 1326-CPB1-030 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326-CPB1-030.

Revision Part # Also Known As Availability
1326-CPB1-030/A 1326-CPB1-030 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1326-CPB1-03O
  • 1326-CPB1-O30
  • 1326-CPB1-O3O
  • 1326-CPBI-030
  • 1326-CPBI-03O
  • 1326-CPBI-O30
  • 1326-CPBI-O3O
  • 1326-CP81-030
  • 1326-CP81-03O
  • 1326-CP81-O30
  • 1326-CP81-O3O
  • 1326-CP8I-030
  • 1326-CP8I-03O
  • 1326-CP8I-O30
  • 1326-CP8I-O3O
  • 132G-CPB1-030
  • 132G-CPB1-03O
  • 132G-CPB1-O30
  • 132G-CPB1-O3O
  • 132G-CPBI-030
  • 132G-CPBI-03O
  • 132G-CPBI-O30
  • 132G-CPBI-O3O
  • 132G-CP81-030
  • 132G-CP81-03O
  • 132G-CP81-O30
  • 132G-CP81-O3O
  • 132G-CP8I-030
  • 132G-CP8I-03O
  • 132G-CP8I-O30
  • 132G-CP8I-O3O
  • I326-CPB1-030
  • I326-CPB1-03O
  • I326-CPB1-O30
  • I326-CPB1-O3O
  • I326-CPBI-030
  • I326-CPBI-03O
  • I326-CPBI-O30
  • I326-CPBI-O3O
  • I326-CP81-030
  • I326-CP81-03O
  • I326-CP81-O30
  • I326-CP81-O3O
  • I326-CP8I-030
  • I326-CP8I-03O
  • I326-CP8I-O30
  • I326-CP8I-O3O
  • I32G-CPB1-030
  • I32G-CPB1-03O
  • I32G-CPB1-O30
  • I32G-CPB1-O3O
  • I32G-CPBI-030
  • I32G-CPBI-03O
  • I32G-CPBI-O30
  • I32G-CPBI-O3O
  • I32G-CP81-030
  • I32G-CP81-03O
  • I32G-CP81-O30
  • I32G-CP81-O3O
  • I32G-CP8I-030
  • I32G-CP8I-03O
  • I32G-CP8I-O30
  • I32G-CP8I-O3O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP