GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Drive |
Part Number: | 1326-CPB1-060 |
Series: | 1326 |
Description:
The 1326-CPB1-060 Series B servo motor power cable from Allen-Bradley is a power cable for Bulletin 1326, 460-volt alternating current (AC) rated servo motors. The 1394 motion control system used for standard application. The 1326-CPB1-060 module comes in a 60-meter cable bundle with a 76.2 mm bending radius with an average weight of 38 pounds. It is ideal for heavy-duty industrial applications. This cable has been discontinued by Allen-Bradley / Rockwell Automation.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley / Rockwell automation 1326-CPB1-060 is a Series B motor cable that is certified by UL. This cable assembly is suited for every regular one-time flex industrial applications. It is used for 1394 motion control modules and the 1326 servo motors. It comes with a braided shield wire that gives him a high level of immunity to all kinds of electromagnetic interference. It has a push-pull motor connector-end for easy plug-and-play installation and maintenance too.
The 1326-CPB1-060 has 10 wires in total, of which two are brake wires, three power wires, two thermostat wires, one shield ground wire, and one ground (GND) wire that comes in a cable assembly package. This cable has a maximum diameter of 14 millimeters and an average connector diameter of 43.2 millimeters. The 1326-CPB1-060 is manufactured as a single power cable. It must be housed inside an IP65 rated enclosure. This housing offers tight protection from corrosive elements and harsh industrial environments.
The 1326-CPB1-060 is packaged with a standard cable. The package also comes with a number of installation accessories. These accessories include gadgets such as contact pins, connector housing, one instruction manual, and insulated body. It is suggested that users hang this power cable in a vertical position and stretched it out for at least 24 hours. This is necessary to loosen the conductors on the cable.
It comes in a 60-meter cable bundle with 76.2 millimeters bending radius and an average weight of 38 pounds. It should be noted that this cable assembly was discontinued by the manufacturer in 2005 and is replaced with new products from the same family of servo motor power cables.
Question: Does Automation Stop offer repairs on the 1326-CPB1-060?
Answer: Yes. We offer repairs for the 1326-CPB1-060 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and 1326-CPB1-060?
Answer: If you buy the 1326-CPB1-060 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1326-CPB1-060 online?
Answer: Yes. Automation Stop sells the 1326-CPB1-060 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1326-CPB1-060?
Answer: The 1326-CPB1-060 is made by Allen Bradley - Motors.
For additional information about 1326-CPB1-060 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326-CPB1-060.
Revision Part # | Also Known As | Availability |
---|---|---|
1326-CPB1-060/A | 1326-CPB1-060 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.