GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1326AB-B720E-21-K7

Manufacturer: Allen Bradley - Motors
Product Type: Drive
Part Number: 1326AB-B720E-21-K7
Series: 1326 Motors

Description:

Part number 1326AB-B720E-21-K7 is a 460 volt Torque Plus AC servo motor that was developed by Allen-Bradley. This servo motor has a voltage of 460/380 volts AC. The frame diameter of this device measures 194 millimeters, with a 215 millimeter bolt center. The magnet stack length is 30. The rated speed of this device is 3500 rpm at 460 volts and 3000 rpm at 380 volts. The motor weighs approximately 46.33 kilograms.


Key Features:

  • has voltage of 460/380v ac
  • has been discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$5,691.00

Available: 4

What is Refurbished

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1326AB-B720E-21-K7 is a 460 volt AC (alternating current) servo motor. This motor is a Torque Plus series servo motor that was manufactured by the Allen-Bradley company. This servo motor has a voltage of 460/380 volts AC (alternating current). The frame diameter of the 1326AB-B720E-21-K7 measures 194 millimeters, with a bolt center that measures 215 millimeters. The magnetic stack length when it comes to this device is twenty (20). This device is equipped with an IEC metric flange with a keyway. Additionally, the 1326AB-B720E-21-K7 is equipped with a forty-one (41) N-m (140 lb-in.) holding brake with a twenty-four (24) volt DC (direct current) coil. 

The Allen-Bradley 1326AB-B720E-21-K7's rated speed is 3500 rpm at 460 volts and 3000 rpm at 380 volts, both at an ambient temperature of one hundred and four (104) degrees Fahrenheit. This device has a thirty-point-nine (30.9) N-m (273 lb-in.) stall torque when operating continuously. However, when at its peak, the stall torque for the 1326AB-B720E-21-K7 is eighty-eight-point-one (88.1) N-m (780 ln-in.). In regards to the stall current of this product when operating continuously, it is seventeen-point-five (17.5) A (amperes), while when operating at its peak, the stall current of the 1326AB-B720E-21-K7 is fifty (50) A (amperes). This servo motor has a terminal resistance of 0.665 ohms at 25 degrees Celsius and an inductance rating of8.73 millihenry at twenty-five degrees Celsius. The 1326AB-B720E-21-K7 has a rotor polar moment of inertia of 0.015 kg-m². The weight of the motor is approximately 46.33 kilograms, or the same as 102 pounds. 

Technical Specifications

Manufacturer Allen Bradley
Series 460V Torque Plus Series
Product Type Ferrite AC Servo Motor
Frame Series 194 mm frame diameter (215 mm bolt center)
Motor magnet stack length 20mm
Rated Speed 460V 3000 rpm/380V 2500 rpm
Flange and Shaft Series IEC Metric Flange with keyway
Standard Options 41 N-m (140 lb-in.) Holding brake with 24V DC coil for 1326AB-B7 frame series
MPN 1326AB-B720E-21-K7
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1326AB-B720E-21-K7?

Answer: Yes. We offer repairs for the 1326AB-B720E-21-K7 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and 1326AB-B720E-21-K7?

Answer: If you buy the 1326AB-B720E-21-K7 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1326AB-B720E-21-K7 online?

Answer: Yes. Automation Stop sells the 1326AB-B720E-21-K7 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1326AB-B720E-21-K7?

Answer: The 1326AB-B720E-21-K7 is made by Allen Bradley - Motors.


Question: What type of product is the 1326AB-B720E-21-K7?

Answer: The 1326AB-B720E-21-K7 is part of the 1326 Motors series.


Question: What kind of Flange and Shaft Series does the Allen Bradley-Rockwell Automation 1326AB-B720E-21-K7 have?

Answer: The 1326AB-B720E-21-K7 has Flange and Shaft Series IEC Metric Flange with keyway.


Question: What is the Frame Series of the Allen Bradley/Rockwell Automation 1326AB-B720E-21-K7?

Answer: The Frame Series of the Allen Bradley/Rockwell Automation 1326AB-B720E-21-K7 is 194 mm frame diameter (215 mm bolt center).


Question: What is the Motor magnet stack length of the 1326AB-B720E-21-K7?

Answer: The 1326AB-B720E-21-K7 has a Motor magnet stack length of 20mm.


Question: What Product Type is included with the 1326AB-B720E-21-K7?

Answer: The 1326AB-B720E-21-K7 has a Ferrite AC (alternating current) Servo Motor Product Type.


Question: What Rated Speed does the Allen Bradley 1326AB-B720E-21-K7 have?

Answer: The 1326AB-B720E-21-K7 has a Rated Speed of 460 volts 3000 revolutions per minute (RPM)/460 volts 2500 revolutions per minute (RPM).


Question: What is the Standard Options of the 1326AB-B720E-21-K7?

Answer: The 1326AB-B720E-21-K7 has a Standard Options of 41 N-m (140 lb-in.) Holding brake with 24 volts direct current coil for 1326AB-B7 frame series.


Series information for 1326AB-B720E-21-K7

For additional information about 1326AB-B720E-21-K7 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326AB-B720E-21-K7.

Revision Part # Also Known As Availability
1326AB-B720E-21-K7/A 1326AB-B720E-21-K7 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1326AB-B720E-2I-K7
  • 1326AB-B72OE-21-K7
  • 1326AB-B72OE-2I-K7
  • 1326AB-8720E-21-K7
  • 1326AB-8720E-2I-K7
  • 1326AB-872OE-21-K7
  • 1326AB-872OE-2I-K7
  • 1326A8-B720E-21-K7
  • 1326A8-B720E-2I-K7
  • 1326A8-B72OE-21-K7
  • 1326A8-B72OE-2I-K7
  • 1326A8-8720E-21-K7
  • 1326A8-8720E-2I-K7
  • 1326A8-872OE-21-K7
  • 1326A8-872OE-2I-K7
  • 132GAB-B720E-21-K7
  • 132GAB-B720E-2I-K7
  • 132GAB-B72OE-21-K7
  • 132GAB-B72OE-2I-K7
  • 132GAB-8720E-21-K7
  • 132GAB-8720E-2I-K7
  • 132GAB-872OE-21-K7
  • 132GAB-872OE-2I-K7
  • 132GA8-B720E-21-K7
  • 132GA8-B720E-2I-K7
  • 132GA8-B72OE-21-K7
  • 132GA8-B72OE-2I-K7
  • 132GA8-8720E-21-K7
  • 132GA8-8720E-2I-K7
  • 132GA8-872OE-21-K7
  • 132GA8-872OE-2I-K7
  • I326AB-B720E-21-K7
  • I326AB-B720E-2I-K7
  • I326AB-B72OE-21-K7
  • I326AB-B72OE-2I-K7
  • I326AB-8720E-21-K7
  • I326AB-8720E-2I-K7
  • I326AB-872OE-21-K7
  • I326AB-872OE-2I-K7
  • I326A8-B720E-21-K7
  • I326A8-B720E-2I-K7
  • I326A8-B72OE-21-K7
  • I326A8-B72OE-2I-K7
  • I326A8-8720E-21-K7
  • I326A8-8720E-2I-K7
  • I326A8-872OE-21-K7
  • I326A8-872OE-2I-K7
  • I32GAB-B720E-21-K7
  • I32GAB-B720E-2I-K7
  • I32GAB-B72OE-21-K7
  • I32GAB-B72OE-2I-K7
  • I32GAB-8720E-21-K7
  • I32GAB-8720E-2I-K7
  • I32GAB-872OE-21-K7
  • I32GAB-872OE-2I-K7
  • I32GA8-B720E-21-K7
  • I32GA8-B720E-2I-K7
  • I32GA8-B72OE-21-K7
  • I32GA8-B72OE-2I-K7
  • I32GA8-8720E-21-K7
  • I32GA8-8720E-2I-K7
  • I32GA8-872OE-21-K7
  • I32GA8-872OE-2I-K7

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP