GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Drive |
Part Number: | 1326AS-B440G-21-K4 |
Series: | 1326 Motors |
Description:
This Allen Bradley 1326 Motors is an alternating current (AC) servo mtr, 460 volts 6.4NM (nanometer) 5000 revolutions per minute.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Manufacturer | Allen Bradley |
Series | 1326AS Series Low Inertia Brushless Servo Motors |
Product Type | Low Inertia Brushless Servo Motor |
Voltage | 460V AC |
Frame Series (Approximate stator size) | 100mm |
Motor Length (magnet stack length) | 40 |
Rated Speed 460V | 5250 rpm |
Rated Speed 380V | 4340 rpm |
Motor Rated Torque | 64 N-m (56 lb-in.) |
Motor Rated Output | 2.0 KW |
Rotor Inertia | 0.0005 kg-m^2 (0.0046 lb-in.-s^2) |
System Continuous Torque | 6.4 N-m (56 lb-in.) AM07, AM50 / 5.3 N-m (47 lb-in.) AM04 |
System Peak Stall Torque | 19 N-m (168 lb-in.) AM50 / 17.6 N-m (156 lb-in.) AM07 / 10.5 N-m (93 lb-in.) AM04 / |
System Continuous Stall Current | 5.4 A AM07, AM50 / 4.5 A AM04 |
System Peak Stall Current | 16.2 A AM50 / 15.0 A AM07 / 9.0 A AM04 |
1394 Axis Module | AM04, AM07, AM50 |
Flange and Shaft Series | IEC metric flange with keyway |
Holding Brake | 10.2 N-m (90 lb in.) Holding brake with 24V DC coil for 1326AS-B4 frame series |
MPN | 1326AS-B440G-21-K4 |
Question: Does Automation Stop offer repairs on the 1326AS-B440G-21-K4?
Answer: Yes. We offer repairs for the 1326AS-B440G-21-K4 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and 1326AS-B440G-21-K4?
Answer: If you buy the 1326AS-B440G-21-K4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1326AS-B440G-21-K4 online?
Answer: Yes. Automation Stop sells the 1326AS-B440G-21-K4 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1326AS-B440G-21-K4?
Answer: The 1326AS-B440G-21-K4 is made by Allen Bradley - Motors.
Question: What type of product is the 1326AS-B440G-21-K4?
Answer: The 1326AS-B440G-21-K4 is part of the 1326 Motors series.
Question: What is the 1394 Axis Module of the 1326AS-B440G-21-K4?
Answer: The Allen-Bradley 1326AS-B440G-21-K4 has a 1394 Axis Module of AM04, AM07, AM50.
Question: What Flange and Shaft Series are included with the 1326AS-B440G-21-K4?
Answer: The Rockwell-Automation 1326AS-B440G-21-K4 includes IEC metric flange with keyway for its Flange and Shaft Series.
Question: What Frame Series (Approximate stator size) does the Rockwell-Automation 1326AS-B440G-21-K4 have?
Answer: The Frame Series (Approximate stator size) of the 1326AS-B440G-21-K4 is 100mm.
Question: What is the Holding Brake of the 1326AS-B440G-21-K4?
Answer: The Allen Bradley/Rockwell Automation 1326AS-B440G-21-K4 has a Holding Brake of 10.2 N-m (90 lb in.) Holding brake with 24 volts DC coil for 1326AS-B4 frame series.
Question: What Motor Length (magnet stack length) does the Allen Bradley Automation 1326AS-B440G-21-K4 have?
Answer: The Allen Bradley Automation 1326AS-B440G-21-K4 has a Motor Length (magnet stack length) of 40.
Question: What Motor Rated Output does the 1326AS-B440G-21-K4 have?
Answer: The 1326AS-B440G-21-K4 has a Motor Rated Output of 2.0 KW.
Question: What is the Motor Rated Torque of the 1326AS-B440G-21-K4?
Answer: The 1326AS-B440G-21-K4 has a Motor Rated Torque of 64 N-m (56 lb-in.).
Question: What Product Type is included with the Rockwell Automation 1326AS-B440G-21-K4?
Answer: The 1326AS-B440G-21-K4 has a Low Inertia Brushless Servo Motor Product Type.
Question: What is the Rated Speed 380V of the 1326AS-B440G-21-K4?
Answer: The 1326AS-B440G-21-K4 has a Rated Speed 380V of 4340 revolutions per minute (RPM).
Question: What is the Rated Speed 460V of the 1326AS-B440G-21-K4?
Answer: The Allen Bradley 1326AS-B440G-21-K4 has a Rated Speed 460V of 5250 revolutions per minute (RPM).
Question: What Rotor Inertia does the Allen Bradley-Rockwell Automation 1326AS-B440G-21-K4 have?
Answer: The Rotor Inertia of the 1326AS-B440G-21-K4 is 0.0005 kg-m^2 (0.0046 lb-in.-s^2).
Question: What is the System Continuous Stall Current of the 1326AS-B440G-21-K4?
Answer: The System Continuous Stall Current of the 1326AS-B440G-21-K4 is 5.4 A AM07, AM50 / 4.5 A AM04.
Question: What System Continuous Torque does the 1326AS-B440G-21-K4 have?
Answer: The System Continuous Torque of the Allen Bradley-Rockwell Automation 1326AS-B440G-21-K4 is 6.4 N-m (56 lb-in.) AM07, AM50 / 5.3 N-m (47 lb-in.) AM04.
Question: What System Peak Stall Current does the 1326AS-B440G-21-K4 have?
Answer: The 1326AS-B440G-21-K4 has a System Peak Stall Current of 16.2 A AM50 / 15.0 A AM07 / 9.0 A AM04.
Question: What System Peak Stall Torque does the Allen Bradley 1326AS-B440G-21-K4 have?
Answer: The System Peak Stall Torque of the 1326AS-B440G-21-K4 is 19 N-m (168 lb-in.) AM50 / 17.6 N-m (156 lb-in.) AM07 / 10.5 N-m (93 lb-in.) AM04 / .
Question: What Voltage does the 1326AS-B440G-21-K4 have?
Answer: The Allen-Bradley 1326AS-B440G-21-K4 has a Voltage of 460 volts alternating current (AC).
For additional information about 1326AS-B440G-21-K4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326AS-B440G-21-K4.
Revision Part # | Also Known As | Availability |
---|---|---|
1326AS-B440G-21-K4/A | 1326AS-B440G-21-K4 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.