GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

MPF-A430P-MJ72BA

Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: MPF-A430P-MJ72BA
Series: MPF

Description:

This Allen Bradley part is a servo mtr, 230vac, 5000 revolutions per minute, 1.9 Kilowatt, 5.99 nm.


Key Features:

  • utilizes a 115 mm frame size
  • has rated speed of 5000 rpm
  • has voltage class of 200v

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical Specifications

Manufacturer Allen Bradley
Series Premium Permanent Magnet Food Grade Motors
Product Type Low-Inertia Servo Motor
Environmental rating IP66/IP67 with shaft seal (standard) and use of environmentally sealed cable connectors, Food grade grease on shaft seal
Certifications Bulletin MPF rotary motors are UL Recognized components to applicable UL and CSA standards. CE marked for all applicable directives. Refer to http://www.ab.com for more information.
Continuous stall torque 1.6...19.4 N*m (14...172 lb*in)
Peak stall torque 3.61...48.6 N*m (32...430 lb*in)
Motor rated output 0.73...4.1 kW
Compatible servo drives Kinetix 5500, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, Ultra3000
Typical applications Food packaging, Volumetric filling, Form, fill, seal, Food handling, For meat and poultry applications, the MP-Series Stainless Steel motors are recommended
Voltage Class 200V
Frame Size 115 mm
Magnet Stack Length 76.2 mm (3.0 in.)
Rated Speed 5000 rpm
Feedback Multi-turn, 1024 sin/cos, absolute encoder (Hiperface protocol)
Enclosure/Shaft Key IP66/IP67 housing/Keyed shaft
Connectors Circular (SpeedTec) DIN connector, right angle, 180 degrees rotatable
Brake No Brake
Mounting Flange IEC metric (oversized), free mounting holes (type FF)
Factory Options Standard
MPN MPF-A430P-MJ72BA
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPF-A430P-MJ72BA?

Answer: Yes. We offer repairs for the MPF-A430P-MJ72BA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPF-A430P-MJ72BA?

Answer: If you buy the MPF-A430P-MJ72BA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPF-A430P-MJ72BA online?

Answer: Yes. Automation Stop sells the MPF-A430P-MJ72BA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPF-A430P-MJ72BA?

Answer: The MPF-A430P-MJ72BA is made by Allen Bradley - Motors.


Question: Does the Allen Bradley/Rockwell Automation MPF-A430P-MJ72BA have a Brake?

Answer: No Brake.


Question: What Certifications are included with the Allen Bradley/Rockwell Automation MPF-A430P-MJ72BA?

Answer: The Allen Bradley/Rockwell Automation MPF-A430P-MJ72BA has Certifications Bulletin MPF rotary motors are UL Recognized components to applicable UL and CSA standards. CE marked for all applicable directives. Refer to http://www.ab.com for more information..


Question: What Compatible servo drives does the MPF-A430P-MJ72BA have?

Answer: The Allen Bradley MPF-A430P-MJ72BA has a Compatible servo drives of Kinetix 5500, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, Ultra3000.


Question: What Connectors does the Allen-Bradley MPF-A430P-MJ72BA have?

Answer: The Connectors of the MPF-A430P-MJ72BA is Circular (SpeedTec) DIN connector, right angle, 180 degrees rotatable.


Question: What is the Continuous stall torque of the Rockwell-Automation MPF-A430P-MJ72BA?

Answer: The Continuous stall torque of the MPF-A430P-MJ72BA is 1.6...19.4 N*m (14...172 lb*in).


Question: What Enclosure/Shaft Key does the MPF-A430P-MJ72BA have?

Answer: The Enclosure/Shaft Key of the Allen-Bradley MPF-A430P-MJ72BA is IP66/IP67 housing/Keyed shaft.


Question: What is the Environmental rating of the Rockwell-Automation MPF-A430P-MJ72BA?

Answer: The Environmental rating of the MPF-A430P-MJ72BA is IP66/IP67 with shaft seal (standard) and use of environmentally sealed cable connectors, Food grade grease on shaft seal.


Question: What Factory Options are included with the Allen Bradley-Rockwell Automation MPF-A430P-MJ72BA?

Answer: The Allen Bradley-Rockwell Automation MPF-A430P-MJ72BA has Factory Options Standard.


Question: What Feedback does the Rockwell-Automation MPF-A430P-MJ72BA have?

Answer: The Rockwell-Automation MPF-A430P-MJ72BA has a Feedback of Multi-turn, 1024 sin/cos, absolute encoder (Hiperface protocol).


Question: What Frame Size does the Allen Bradley-Rockwell Automation MPF-A430P-MJ72BA have?

Answer: The MPF-A430P-MJ72BA has a Frame Size of 115 mm.


Question: What Magnet Stack Length does the Rockwell-Automation MPF-A430P-MJ72BA have?

Answer: The Magnet Stack Length of the MPF-A430P-MJ72BA is 76.2 mm (3.0 in.).


Question: What is the Motor rated output of the Allen-Bradley MPF-A430P-MJ72BA?

Answer: The MPF-A430P-MJ72BA has a Motor rated output of 0.73...4.1 kW.


Question: What Mounting Flange does the Allen Bradley MPF-A430P-MJ72BA have?

Answer: The MPF-A430P-MJ72BA has a IEC metric (oversized), free mounting holes (type FF) Mounting Flange.


Question: What is the Peak stall torque of the MPF-A430P-MJ72BA?

Answer: The Peak stall torque of the Allen Bradley Automation MPF-A430P-MJ72BA is 3.61...48.6 N*m (32...430 lb*in).


Question: What Product Type is included with the Allen Bradley/Rockwell Automation MPF-A430P-MJ72BA?

Answer: The MPF-A430P-MJ72BA has a Low-Inertia Servo Motor Product Type.


Question: What is the Rated Speed of the MPF-A430P-MJ72BA?

Answer: The MPF-A430P-MJ72BA has a Rated Speed of 5000 revolutions per minute (RPM).


Question: What kind of Typical applications does the Allen Bradley MPF-A430P-MJ72BA have?

Answer: The MPF-A430P-MJ72BA includes Food packaging, Volumetric filling, Form, fill, seal, Food handling, For meat and poultry applications, the MP-Series Stainless Steel motors are recommended for its Typical applications.


Question: What Voltage Class does the Allen Bradley Automation MPF-A430P-MJ72BA have?

Answer: The Voltage Class of the Allen Bradley Automation MPF-A430P-MJ72BA is 200V.


Series information for MPF-A430P-MJ72BA

For additional information about MPF-A430P-MJ72BA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPF-A430P-MJ72BA.

Revision Part # Also Known As Availability
MPF-A430P-MJ72BA/A MPF-A430P-MJ72BA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPF-A430P-MJ728A
  • MPF-A43OP-MJ72BA
  • MPF-A43OP-MJ728A

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP