GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-A330P-MJ74AA |
Series: | MPL |
Description:
The MPL-A330P-MJ74AA servo motor from Allen-Bradley is a low-inertia servo motor with a torque of 330 pounds per square inch. It belongs to the MPL motors series and has a rated voltage of 200 volts. It is a permanent magnet motor. This servo motor has a high rotating speed of 5000 revolutions per minute (rpm). It is also a member of the 200 volt voltage class. The MPL-A330P-MJ74AA low-inertia servo motor is designed to fit within a 100-millimeter frame.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley's MPL-A330P-MJ74AA is a moderate level servo motor with a high torque output. It is a member of the Allen-Bradley MPL servo motors family and was equipped to accommodate a wide range of jobs in a wide variety of applications. Additionally, it belongs to the 200 volt voltage class of these servo motors. The MPL-A330P-MJ74AA low-inertia servo motor has a 100-millimeter diameter and is intended to fit within a 100-millimeter-diameter frame. This motor has a three-inch magnet stack with a maximum rated speed of 5000 revolutions per minute (rpm). This is accomplished by the use of a multi-turn high-resolution encoder equipped with a shaft key. However, there is no shaft seal. The MPL-A330P-MJ74AA low-inertia servo motor, according to the manufacturer, has a 24 volt DC (direct current) brake, while other MPL servo motors do not. Importantly, it features an IEC mounting flange in addition to the standard factory-specified options and accessories.
Part number MPL-A330P-MJ74AA has low inertia and is ideal for use in high-performance motion systems such as robotics. As the name indicates, it is a brushless servo motor optimized for use in high-performance motion systems. It is vital to note that the shaft should never be seized or shifted while picking up or handling the MPL-A330P-MJ74AA low-inertia servo motor. If the shaft of the motor breaks, it may fall and hurt anybody close. While the shaft can support the motor, it is possible for the shaft cap to break away, resulting in the motor being dropped and damaged. The shaft cap must be removed prior to powering on the MPL-A330P-MJ74AA low-inertia servo motor. To avoid damaging the motor's internal components, this must be done gently using a screwdriver or by hand, rather than with a hammer or other abrasive instrument. Protective servo motor shields and shaft seals may be installed on this servo motor to secure it from harm and enhance its operational range.
MPN | MPL-A330P-MJ74AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 200V |
Frame Size | 100 mm |
Magnetic Stack Length | 3 in |
Rated Speed | 5000 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | 24V DC brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-A330P-MJ74AA?
Answer: Yes. We offer repairs for the MPL-A330P-MJ74AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A330P-MJ74AA?
Answer: If you buy the MPL-A330P-MJ74AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-A330P-MJ74AA online?
Answer: Yes. Automation Stop sells the MPL-A330P-MJ74AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-A330P-MJ74AA?
Answer: The MPL-A330P-MJ74AA is made by Allen Bradley - Motors.
Question: What is the Brake of the Allen Bradley Automation MPL-A330P-MJ74AA?
Answer: The Brake of the Allen Bradley Automation MPL-A330P-MJ74AA is 24 volts direct current brake.
Question: What is the Connectors of the Allen-Bradley MPL-A330P-MJ74AA?
Answer: The Allen-Bradley MPL-A330P-MJ74AA has a Connectors of Circular DIN, right angle, 180 degree rotatable.
Question: What kind of Factory Designated Options does the MPL-A330P-MJ74AA have?
Answer: The MPL-A330P-MJ74AA has Factory Designated Options Standard.
Question: What Feeback is included with the Allen Bradley Automation MPL-A330P-MJ74AA?
Answer: The MPL-A330P-MJ74AA has a Multi-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the MPL-A330P-MJ74AA?
Answer: The Rockwell-Automation MPL-A330P-MJ74AA has a Frame Size of 100 mm.
Question: What is the Magnetic Stack Length of the MPL-A330P-MJ74AA?
Answer: The Rockwell Automation MPL-A330P-MJ74AA has a Magnetic Stack Length of 3 in .
Question: What Mounting Flange is included with the Allen Bradley-Rockwell Automation MPL-A330P-MJ74AA?
Answer: The Allen Bradley-Rockwell Automation MPL-A330P-MJ74AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-A330P-MJ74AA?
Answer: The Allen Bradley/Rockwell Automation MPL-A330P-MJ74AA has a Rated Speed of 5000 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the MPL-A330P-MJ74AA?
Answer: The MPL-A330P-MJ74AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Class of the Allen Bradley-Rockwell Automation MPL-A330P-MJ74AA?
Answer: The Voltage Class of the MPL-A330P-MJ74AA is 200V.
For additional information about MPL-A330P-MJ74AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A330P-MJ74AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-A330P-MJ74AA/A | MPL-A330P-MJ74AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.