GE / IP FANUC Series 90/30 In Stock

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-A330P-SJ72AA

Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-A330P-SJ72AA
Series: MPL Servo Motors

Description:

This MPL-A330P-SJ72AA by Allen Bradley has a 500 RPM maximum speed, 200 V alternating current class and, low inertia of 0.00012 kg m�. This product has exterior SpeedTech DIN right-angle connectors with 180-degree rotation. It reaches a maximum torque of 11.1 Nm and a continuous torque of 4.18 at the stall with no brakes and a rated 1.8 kW power. It comes with a 76.2 mm magnetic stack and an IEC metric Frame 3 (100 mm).



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

The MP-series Low Inertia (MPL) Servo Motors by Allen Bradley Rockwell Automation are high output brushless motors with a reduced size and higher torque. MPL-A330P-SJ72AA belongs to this series with a torque that goes to a maximum of 11.1 Nm in a small time and has a continuous value of 4.18 Nm at the stall but with no brakes present. This servomotor belongs to the 200 V alternating current class with an output power range of 1.8 kW. The famously low inertia of this motor is 0.00012 kg m². The Frame size comes out to be 100 mm or Frame Size 3 in other words according to standard IEC metric. The maximum speed this motor can reach is 5000 RPM and this is measured using the absolute single-turn encoder that has 1024 turn sin/cos resolution. Also, this motor follows a Hiperface protocol as a feedback system which reduces the number of wires needed inside the servo motor. The shaft inside the motor is keyed which secures the operational components stay inside the shaft. The shaft is not sealed so it is resistant to some extent as it is rated with IP50 and IP66 enclosures. To protect the internal components from humidity and moisture, the motor should be kept in a dry and cool environment. MPL-A330P-SJ72AA weighs 4.6 kg or 10.1 lbs. and it comes with all the standard factory options. There is also a magnetic stack of 76.2 mm (3 inches). This servo motor can be mounted on any surface that uses an m7 type motor end. To connect the motor with other devices/ components, a SeedTech Din connector is used which makes the connections cost-efficient and secure.

Technical Specifications

MPN MPL-A330P-SJ72AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 200V
Frame Size 100 mm
Magnetic Stack Length 3 in
Rated Speed 5000 rpm
Feeback Single-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular DIN, right angle, 180 degree rotatable
Brake No brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-A330P-SJ72AA?

Answer: Yes. We offer repairs for the MPL-A330P-SJ72AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A330P-SJ72AA?

Answer: If you buy the MPL-A330P-SJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-A330P-SJ72AA online?

Answer: Yes. Automation Stop sells the MPL-A330P-SJ72AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-A330P-SJ72AA?

Answer: The MPL-A330P-SJ72AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-A330P-SJ72AA?

Answer: The MPL-A330P-SJ72AA is part of the MPL Servo Motors series.


Question: Does the Allen Bradley Automation MPL-A330P-SJ72AA have a Brake?

Answer: No brake.


Question: What Connectors does the Allen Bradley/Rockwell Automation MPL-A330P-SJ72AA have?

Answer: The Connectors of the Allen Bradley/Rockwell Automation MPL-A330P-SJ72AA is Circular DIN, right angle, 180 degree rotatable.


Question: What Factory Designated Options are included with the Allen Bradley-Rockwell Automation MPL-A330P-SJ72AA?

Answer: The MPL-A330P-SJ72AA includes Standard for its Factory Designated Options.


Question: What Feeback is included with the Allen Bradley-Rockwell Automation MPL-A330P-SJ72AA?

Answer: The MPL-A330P-SJ72AA has a Single-turn high-resolution encoder Feeback.


Question: What Frame Size does the MPL-A330P-SJ72AA have?

Answer: The MPL-A330P-SJ72AA has a Frame Size of 100 mm.


Question: What Magnetic Stack Length does the MPL-A330P-SJ72AA have?

Answer: The MPL-A330P-SJ72AA has a Magnetic Stack Length of 3 in .


Question: What Mounting Flange does the MPL-A330P-SJ72AA have?

Answer: The Allen Bradley/Rockwell Automation MPL-A330P-SJ72AA has a IEC Metric Mounting Flange.


Question: What is the Rated Speed of the MPL-A330P-SJ72AA?

Answer: The MPL-A330P-SJ72AA has a Rated Speed of 5000 revolutions per minute (RPM).


Question: What Shaft Key/Seal is included with the MPL-A330P-SJ72AA?

Answer: The MPL-A330P-SJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What Voltage Class does the MPL-A330P-SJ72AA have?

Answer: The Voltage Class of the MPL-A330P-SJ72AA is 200V.


Series information for MPL-A330P-SJ72AA

For additional information about MPL-A330P-SJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A330P-SJ72AA.

Revision Part # Also Known As Availability
MPL-A330P-SJ72AA/A MPL-A330P-SJ72AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-A330P-5J72AA
  • MPL-A33OP-SJ72AA
  • MPL-A33OP-5J72AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP