GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-A420P-MJ72AA |
Series: | MPL Servo Motors |
Description:
The Allen Bradley MPL-A420P-MJ72AA is an MP series low inertia servo motor. This servo motor has a rated inertia of 0.00026 kg-m^2. This servo motor has a continuous stall torque of 4.74 Nm, as well as a peak stall torque of 10.2 Nm. This servo motor belongs to the 200-volts voltage class of servo motors. It has a rated speed of 5000 revolutions per minute. It is equipped with a multi-turn high-resolution encoder used for feedback purposes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley MPL-A420P-MJ72AA belongs to the Kinetix MP series of low-inertia servo motors. These have a higher torque, as well as a small and compact design to reduce the size of the motor. These dynamic brushless motors with smart motor technologies are manufactured and designed to meet high motion system performances. This particular model belongs to a permanent magnet servo motor that has rotary action with a low inertia of 0.00026 kg-m². This servo motor has a continuous stall torque of 4.74 Nm, or 42 lb-in, as well as a 10.2 Nm, or 90 lb-in, peak stall torque. This servo motor belongs to the 200-volt voltage class and has a frame size of 4, or the equivalent of 115 millimeters. The magnetic stack length of this servo motor measures 2.0 inches, or 50.8 millimeters. The rated speed of this servo motor is 5000 revolutions per minute (rpm). The Hiperface protocol implemented in the servo motor utilizes the minimum number of connections to and from the frequency converter and motor feedback system. The Allen Bradley MPL-A420P-MJ72AA servo motor has a multi-turn high-resolution encoder for feedback. There is a shaft key present in this motor, which is essentially a square or rectangular slot used to lock together the rotary elements on the shaft. The absence of shaft seal means that fluids can pass along the rotary shaft if they get inside the motor. The motor can be connected with other devices using a circular DIN connector, which has a right angle bent with a 180-degree rotation possibility.
MPN | MPL-A420P-MJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 200V |
Frame Size | 115 mm |
Magnetic Stack Length | 2 in |
Rated Speed | 5000 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-A420P-MJ72AA?
Answer: Yes. We offer repairs for the MPL-A420P-MJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A420P-MJ72AA?
Answer: If you buy the MPL-A420P-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-A420P-MJ72AA online?
Answer: Yes. Automation Stop sells the MPL-A420P-MJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-A420P-MJ72AA?
Answer: The MPL-A420P-MJ72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-A420P-MJ72AA?
Answer: The MPL-A420P-MJ72AA is part of the MPL Servo Motors series.
Question: Does the Rockwell Automation MPL-A420P-MJ72AA have a Brake?
Answer: No brake.
Question: What Connectors does the MPL-A420P-MJ72AA have?
Answer: The Allen Bradley MPL-A420P-MJ72AA has a Connectors of Circular DIN, right angle, 180 degree rotatable.
Question: What Factory Designated Options are included with the MPL-A420P-MJ72AA?
Answer: The Allen-Bradley MPL-A420P-MJ72AA includes Standard for its Factory Designated Options.
Question: What Feeback is included with the Rockwell-Automation MPL-A420P-MJ72AA?
Answer: The MPL-A420P-MJ72AA has a Multi-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the MPL-A420P-MJ72AA?
Answer: The Frame Size of the MPL-A420P-MJ72AA is 115 mm .
Question: What is the Magnetic Stack Length of the Allen Bradley-Rockwell Automation MPL-A420P-MJ72AA?
Answer: The Magnetic Stack Length of the Allen Bradley-Rockwell Automation MPL-A420P-MJ72AA is 2 in.
Question: What Mounting Flange is included with the MPL-A420P-MJ72AA?
Answer: The MPL-A420P-MJ72AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-A420P-MJ72AA?
Answer: The Rated Speed of the Allen Bradley/Rockwell Automation MPL-A420P-MJ72AA is 5000 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the MPL-A420P-MJ72AA have?
Answer: The Allen Bradley-Rockwell Automation MPL-A420P-MJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What Voltage Class does the Rockwell Automation MPL-A420P-MJ72AA have?
Answer: The Voltage Class of the Rockwell Automation MPL-A420P-MJ72AA is 200V.
For additional information about MPL-A420P-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A420P-MJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-A420P-MJ72AA/A | MPL-A420P-MJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.