GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-A430H-HJ22AA |
Series: | MPL |
Description:
Product number MPL-A430H-HJ22AA is a low inertia servo motor. This servo motor belongs to the MP series of products. It has a frame that measures 115 millimeters. The magnetic stack length of this servo motor is 3 stacks, or 3.0 inches. The rated speed of this servo motor is 3500 revolutions per minute (rpm). This device has an approximate weight off 5.5 kilograms. It has physical dimensions that measure 211.9 mm x 132.8 mm x 95 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley MPL-A430H-HJ22AA is a low inertia servo motor belonging to Kinetix MPL series. This low inertia permanent magnet rotary motor has a 115 mm frame and a rated and maximum speed of 3500 rpm. It has a continuous output torque of 6.21 Nm and output power rating of 1.8 kW. The rated input voltage of the motor is specified at 200 V AC. The motor magnet stack length is 76.2 mm (3 inches). The motor is equipped with a 2000 line per revolution incremental encoder feedback capability. The motor uses a 180° rotatable, right angle bayonet connector designed to face the motor shaft. The motor shaft is equipped with a shaft key but comes without a shaft seal. Other available accessories for the MPL-A430H-HJ22AA servo motor include a shaft seal kit and holding brake. The motor can be mounted using an IEC metric flange with free mounting holes.
The MPL-A430H-HJ22AA servo motor has compatible operation with Allen-Bradley Kinetix 2000, 7000, 5500, and 6000 drives. Additional aspects of this servo motor include a low rotor inertia, as well as an increased torque to size ratio. This servo motor should be operated in an environment where the temperature ranges from 0 to 40 degrees Celsius, or the equivalent temperature range of 32 to 104 degrees Fahrenheit. When storing this device, the temperature of the surrounding environment should range from -30 to 70 degrees Celsius, or -22 to 158 degrees Fahrenheit. the relative humidity should have levels that range from 5% to 95% and should be non-condensing. The MPL-A430H-HJ22AA servo motor has an approximate weight of 5.5 kilograms. Its physical dimensions measure 211.9 millimeters x 132.8 millimeters x 95 millimeters.
MPN | MPL-A430H-HJ22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 200V |
Frame Size | 115 mm |
Magnetic Stack Length | 3 in |
Rated Speed | 3500 rpm |
Feeback | 2000 line encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-A430H-HJ22AA?
Answer: Yes. We offer repairs for the MPL-A430H-HJ22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A430H-HJ22AA?
Answer: If you buy the MPL-A430H-HJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-A430H-HJ22AA online?
Answer: Yes. Automation Stop sells the MPL-A430H-HJ22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-A430H-HJ22AA?
Answer: The MPL-A430H-HJ22AA is made by Allen Bradley - Motors.
Question: Does the Rockwell-Automation MPL-A430H-HJ22AA have a Brake?
Answer: No brake.
Question: What Connectors are included with the Allen Bradley-Rockwell Automation MPL-A430H-HJ22AA?
Answer: The MPL-A430H-HJ22AA has Connectors Circular bayonet, facing shaft.
Question: What kind of Factory Designated Options does the Allen Bradley Automation MPL-A430H-HJ22AA have?
Answer: The MPL-A430H-HJ22AA includes Standard for its Factory Designated Options.
Question: What Feeback does the MPL-A430H-HJ22AA have?
Answer: The Feeback of the Rockwell Automation MPL-A430H-HJ22AA is 2000 line encoder.
Question: What Frame Size does the MPL-A430H-HJ22AA have?
Answer: The Allen Bradley-Rockwell Automation MPL-A430H-HJ22AA has a Frame Size of 115 mm .
Question: What Magnetic Stack Length does the Allen Bradley MPL-A430H-HJ22AA have?
Answer: The Magnetic Stack Length of the MPL-A430H-HJ22AA is 3 in .
Question: What Mounting Flange does the Allen-Bradley MPL-A430H-HJ22AA have?
Answer: The MPL-A430H-HJ22AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-A430H-HJ22AA?
Answer: The Allen-Bradley MPL-A430H-HJ22AA has a Rated Speed of 3500 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the MPL-A430H-HJ22AA have?
Answer: The MPL-A430H-HJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Class of the MPL-A430H-HJ22AA?
Answer: The MPL-A430H-HJ22AA has a Voltage Class of 200V.
For additional information about MPL-A430H-HJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A430H-HJ22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-A430H-HJ22AA/A | MPL-A430H-HJ22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.