GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-A430H-MJ72AA

MPL-A430H-MJ72AA Image 1 thumbnail
MPL-A430H-MJ72AA Image 2 thumbnail
MPL-A430H-MJ72AA Image 3 thumbnail
Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-A430H-MJ72AA
Series: MPL Servo Motors

Description:

MPL-A430H-MJ72AA by Allen Bradley is a 200 V AC servo motor that has a 76.2 mm magnetic stack and low inertia of 0.00038 kg m�. The motor is operational at 3500 RPM, 1.8 kW output rated power, a continuous torque of 6.21 Nm, and a maximum achievable torque of 19.8 Nm in a small time. This motor has no brakes, a frame size 4 or 115 mm, and a SpeedTechDIN connector for motor connections.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The low inertia MP series MPL-A430H-MJ72AA is manufactured by Allen Bradley Rockwell Automation. The 0.00038 kg m² inertia with a maximum motor speed of 3500 RPM leaves room for a high torque of 19.8 Nm which can be achieved in a small amount of time. The IEC standard metric Frame Size is 4 or in other words 115 millimeters. The inside of the motor contains a magnetic stack of 3 inches in length and a keyed shaft that secures all the connections on the interior. However, there are no brakes for the retention of the value of lead and the shaft has no seal thus is not waterproof. The Hiperface protocol makes sure that a minimum number of cables are being used for the internal connections. To measure the speed of the motor an absolute 1024 multi-turn encoder is used. Connections outside the motor are made using the SpeedTech DIN circular connector which has a 90-degree bend and a 180-degree rotational space. As mentioned above the shaft seal is not available so it is important to mention that the enclosures are IP50 and IP66 rated which proves that they are dustproof. Making the brushless  MPL-A430H-MJ72AA compact and high-duty has an effect on the overall weight, this product weighs 5.5 kgs or 12 lbs. This motor also has a tendency to withstand an operational frequency of a maximum of 2000 Hz and a maximum acceleration of 20 G. This servo motor can be used with any compatible drive series which include the following Kinetix models 5500, 6200, 6000, 300, 350, 2000, 7000 and Ultra 3000.

Technical Specifications

MPN MPL-A430H-MJ72AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 200V
Frame Size 115 mm
Magnetic Stack Length 3 in
Rated Speed 3500 rpm
Feeback Multi-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular DIN, right angle, 180 degree rotatable
Brake No brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-A430H-MJ72AA?

Answer: Yes. We offer repairs for the MPL-A430H-MJ72AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A430H-MJ72AA?

Answer: If you buy the MPL-A430H-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-A430H-MJ72AA online?

Answer: Yes. Automation Stop sells the MPL-A430H-MJ72AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-A430H-MJ72AA?

Answer: The MPL-A430H-MJ72AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-A430H-MJ72AA?

Answer: The MPL-A430H-MJ72AA is part of the MPL Servo Motors series.


Question: Does the MPL-A430H-MJ72AA have a Brake?

Answer: No brake.


Question: What Connectors does the MPL-A430H-MJ72AA have?

Answer: The Allen Bradley Automation MPL-A430H-MJ72AA has a Connectors of Circular DIN, right angle, 180 degree rotatable.


Question: What kind of Factory Designated Options does the MPL-A430H-MJ72AA have?

Answer: The MPL-A430H-MJ72AA has Factory Designated Options Standard.


Question: What Feeback is included with the Allen-Bradley MPL-A430H-MJ72AA?

Answer: The Allen-Bradley MPL-A430H-MJ72AA has a Multi-turn high-resolution encoder Feeback.


Question: What is the Frame Size of the MPL-A430H-MJ72AA?

Answer: The Allen Bradley/Rockwell Automation MPL-A430H-MJ72AA has a Frame Size of 115 mm .


Question: What is the Magnetic Stack Length of the MPL-A430H-MJ72AA?

Answer: The Magnetic Stack Length of the Allen Bradley/Rockwell Automation MPL-A430H-MJ72AA is 3 in .


Question: What Mounting Flange is included with the Allen-Bradley MPL-A430H-MJ72AA?

Answer: The Allen-Bradley MPL-A430H-MJ72AA has a IEC Metric Mounting Flange.


Question: What is the Rated Speed of the Allen-Bradley MPL-A430H-MJ72AA?

Answer: The Rated Speed of the MPL-A430H-MJ72AA is 3500 revolutions per minute (RPM).


Question: What Shaft Key/Seal is included with the Rockwell-Automation MPL-A430H-MJ72AA?

Answer: The MPL-A430H-MJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What is the Voltage Class of the MPL-A430H-MJ72AA?

Answer: The MPL-A430H-MJ72AA has a Voltage Class of 200V.


Series information for MPL-A430H-MJ72AA

For additional information about MPL-A430H-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A430H-MJ72AA.

Revision Part # Also Known As Availability
MPL-A430H-MJ72AA/A MPL-A430H-MJ72AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-A43OH-MJ72AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP