GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-A430P-MJ22AA

MPL-A430P-MJ22AA Image 1 thumbnail
MPL-A430P-MJ22AA Image 2 thumbnail
MPL-A430P-MJ22AA Image 3 thumbnail
MPL-A430P-MJ22AA Image 4 thumbnail
Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-A430P-MJ22AA
Series: MPL Servo Motors

Description:

The MPL-A430P-MJ22AA is a servo motor that was manufactured by Allen Bradley / Rockwell Automation. This servo motor belongs to the MPL series of low inertia servo motors. It operates on a 460-volt AC power supply voltage range. This device has a frame size that measures 115 millimeters. It has a magnetic stack length of 3 inches. The rated speed of this servo motor is 5000 rpm. This device is equipped with high-resolution, multi-turn encoder feedback, a circular bayonet facing shaft, and an IEC metric flange with type FF mounting holes. However, this servo motor is not equipped with a brake.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$1,631.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number MPL-A430P-MJ22AA belongs to the MPL product line that features compact servo motor devices. This product was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This device is a servo motor that operates on a voltage of 469 volts AC (alternating current), and the voltage class of this model is 200 volts. In addition, it contains a keypad shaft. This shaft helps the model to connect to the motor. The frame size of this MPL series, high torque motor measures 115 millimeters (mm). In addition to the torque, the length of its magnetic stack is 3 inches. The rated speed of this servo motor is 5000 revolutions per minute (rpm). Compared to some of its predecessors, this unit has an enhanced and improved rated speed. Additionally, it comes with high-resolution encoder feedback, which is also multi-turn. This Allen Bradley servo motor is equipped with a circular bayonet facing shaft. Additionally, it includes an IEC metric flange with type FF mounting holes. However, this servo motor is not equipped with any brakes. 

The Allen Bradley MPL-A430P-MJ22AA servo motor supports feedback loop mechanisms, which aid in precision and control over shafts. It is also capable of inter operating with Allen Bradley Kinetix servo drives. Apart from these specifications, this low inertia model contains standard options for its application. However, the most significant industrial aspect of this unit is flexible applicability. Regardless, operators should observe safety guidelines from the manufacturer while configuring it. While operating this servo motor, the temperature of the surrounding area should remain between 0 and 40 degrees Celsius. 

Technical Specifications

MPN MPL-A430P-MJ22AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 200V
Frame Size 115 mm
Magnetic Stack Length 3 in
Rated Speed 5000 rpm
Feeback Multi-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular bayonet, facing shaft
Brake No brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-A430P-MJ22AA?

Answer: Yes. We offer repairs for the MPL-A430P-MJ22AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A430P-MJ22AA?

Answer: If you buy the MPL-A430P-MJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-A430P-MJ22AA online?

Answer: Yes. Automation Stop sells the MPL-A430P-MJ22AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-A430P-MJ22AA?

Answer: The MPL-A430P-MJ22AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-A430P-MJ22AA?

Answer: The MPL-A430P-MJ22AA is part of the MPL Servo Motors series.


Question: Does the MPL-A430P-MJ22AA have a Brake?

Answer: No brake.


Question: What kind of Connectors does the MPL-A430P-MJ22AA have?

Answer: The MPL-A430P-MJ22AA includes Circular bayonet, facing shaft for its Connectors.


Question: What kind of Factory Designated Options does the MPL-A430P-MJ22AA have?

Answer: The Rockwell-Automation MPL-A430P-MJ22AA includes Standard for its Factory Designated Options.


Question: What Feeback is included with the Allen Bradley Automation MPL-A430P-MJ22AA?

Answer: The Allen Bradley Automation MPL-A430P-MJ22AA has a Multi-turn high-resolution encoder Feeback.


Question: What is the Frame Size of the MPL-A430P-MJ22AA?

Answer: The Frame Size of the MPL-A430P-MJ22AA is 115 mm .


Question: What Magnetic Stack Length does the MPL-A430P-MJ22AA have?

Answer: The Magnetic Stack Length of the Allen Bradley-Rockwell Automation MPL-A430P-MJ22AA is 3 in .


Question: What Mounting Flange is included with the MPL-A430P-MJ22AA?

Answer: The Allen Bradley-Rockwell Automation MPL-A430P-MJ22AA has a IEC Metric Mounting Flange.


Question: What is the Rated Speed of the Allen Bradley-Rockwell Automation MPL-A430P-MJ22AA?

Answer: The Rated Speed of the MPL-A430P-MJ22AA is 5000 revolutions per minute (RPM).


Question: What Shaft Key/Seal is included with the Allen Bradley Automation MPL-A430P-MJ22AA?

Answer: The MPL-A430P-MJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What is the Voltage Class of the Rockwell-Automation MPL-A430P-MJ22AA?

Answer: The Voltage Class of the Rockwell-Automation MPL-A430P-MJ22AA is 200V.


Series information for MPL-A430P-MJ22AA

For additional information about MPL-A430P-MJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A430P-MJ22AA.

Revision Part # Also Known As Availability
MPL-A430P-MJ22AA/A MPL-A430P-MJ22AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-A43OP-MJ22AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP