GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-A430P-MJ74AA |
Series: | MPL Servo Motors |
Description:
Part of the MP series, the MPL-A430P-MJ74AA is a low inertia servo motor manufactured by Allen-Bradley. This servo motor has a rated speed of 5000 rpm and falls in the 200-volts voltage class. The servo motor is able to accelerate quicker thanks to the high-energy rare-earth magnet that is standard in all MP series low inertia motors. The motor also features an absolute multi-turn encoder with feedback of 124 sin/cos.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number MPL-A430P-MJ74AA is an MP-Series low inertia servo motor. This two hundred and thirty (230) volt motor was produced by Allen-Bradley and has a speed rating of five thousand (5000) revolutions per minute (rpm). This motor's output rating is 2.2 kW. Additionally, the rotor inertia of this low inertia servo motor is 0.00038 kg-m², or 0.0033 lb-in.-s². The continuous stall torque of the Allen-Bradley MPL-A430P-MJ74AA is 5.99 Nm, or fifty-three (53) pounds to an inch (lb-in.)). This servo motor has a stall torque of 19.8 Nm, or one hundred and seventy-five (175) pounds to an inch (lb-in.) at peak. Also, the stall current of this servo motor is 16.8 amperes continuous. At its peak, the Allen-Bradley MPL-A430P-MJ74AA has a stall current of sixty-seven (67.0) amperes. Additionally, this servo motor has a recommended temperature range of zero (0) to forty (40) degrees Celsius, or thirty-two (32) to one hundred and four (104) degrees Fahrenheit, to be operational.
This brushless servo motor, which has a frame size measuring one hundred and fifteen (115) millimeters, as well as a stack length measuring three (3) inches, is capable of delivering higher torque when compared to other types of servo motors. To be more specific, the Allen-Bradley MPL-A430P-MJ74AA is able to yield up to 40% higher torque due to the innovative design of the servo motor. Additionally, this MP-Series Low Inertia Servo Motor is highly dynamic, as well as compact, allowing it to meet the demands of motion systems that run on high-performance. The Allen-Bradley MPL-A430P-MJ74AA is typically used with the Allen-Bradley Kinetix servo drives families. This servo drive is also equipped with a twenty-four (24) volt brake option, which is integral to its design.
The MPL-A430P-MJ74AA comes with an absolute multi-turn feedback encoder. This is able to provide high-resolution feedback within 4096 turns. The electromechanical design does not require a battery. This servo motor also comes equipped with a 24 VDC brake. The max backlash when the brake of the motor is engaged is 37 arc minutes, while the holding torque of the brake is 10.2 N-m or 90 lb-in. The coil current at 24 VDC is 0.0576-0.704 A. When measuring brake response time for the MPL-A430P-MJ74AA, the release measured at 110 ms. Brake rotor inertia registered at 0.00042 kg-m² or 0.0027 lb-in-s². The brake for the motor has a weight of 7.9 kg or 16 lbs. The radial load force of the MPL-A430P-MJ74AA is 49 kg or 108 lb. The axial load rating is 19 kg or 42 lb, while the axial load force with a zero radial load is 25 kg or 55 lbs. The compact motor has a rated output of 2.2 kW and a rotor inertia measuring at 0.00038 kg-m² or 0.0033 lb-in-s². Continuous stall torque amounts to 5.99 Nm or 53 lb-in, while peak stall torque can go up to 19.8 Nm or 175 lb-in. Measured in amperes, the MPL-A430P-MJ74AA measures a continuous stall current of 16.8 and a peak stall current of 67.0. The weight of this servo motor is approximated to be 5.5 kg or 12 lbs. For ease of installation, a mounting pilot is included with the motor. The preferred fasteners for the MPL-A430P-MJ74AA are stainless steel and installation must use equipment and installation practices that promote electromagnetic compatibility and safety.
MPN | MPL-A430P-MJ74AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 200V |
Frame Size | 115 mm |
Magnetic Stack Length | 3 in |
Rated Speed | 5000 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | 24V DC brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-A430P-MJ74AA?
Answer: Yes. We offer repairs for the MPL-A430P-MJ74AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A430P-MJ74AA?
Answer: If you buy the MPL-A430P-MJ74AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-A430P-MJ74AA online?
Answer: Yes. Automation Stop sells the MPL-A430P-MJ74AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-A430P-MJ74AA?
Answer: The MPL-A430P-MJ74AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-A430P-MJ74AA?
Answer: The MPL-A430P-MJ74AA is part of the MPL Servo Motors series.
Question: What is the Brake of the MPL-A430P-MJ74AA?
Answer: The MPL-A430P-MJ74AA has a Brake of 24 volts direct current brake.
Question: What is the Connectors of the Rockwell-Automation MPL-A430P-MJ74AA?
Answer: The Connectors of the Rockwell-Automation MPL-A430P-MJ74AA is Circular DIN, right angle, 180 degree rotatable.
Question: What Factory Designated Options are included with the MPL-A430P-MJ74AA?
Answer: The Rockwell-Automation MPL-A430P-MJ74AA has Factory Designated Options Standard.
Question: What Feeback does the MPL-A430P-MJ74AA have?
Answer: The MPL-A430P-MJ74AA has a Multi-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the Allen-Bradley MPL-A430P-MJ74AA?
Answer: The Frame Size of the Allen-Bradley MPL-A430P-MJ74AA is 115 mm .
Question: What is the Magnetic Stack Length of the MPL-A430P-MJ74AA?
Answer: The Allen-Bradley MPL-A430P-MJ74AA has a Magnetic Stack Length of 3 in .
Question: What Mounting Flange does the MPL-A430P-MJ74AA have?
Answer: The Allen Bradley Automation MPL-A430P-MJ74AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-A430P-MJ74AA?
Answer: The Rated Speed of the MPL-A430P-MJ74AA is 5000 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the MPL-A430P-MJ74AA?
Answer: The Allen Bradley-Rockwell Automation MPL-A430P-MJ74AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Class of the MPL-A430P-MJ74AA?
Answer: The Voltage Class of the Allen Bradley/Rockwell Automation MPL-A430P-MJ74AA is 200V.
For additional information about MPL-A430P-MJ74AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A430P-MJ74AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-A430P-MJ74AA/A | MPL-A430P-MJ74AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.