GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-B330P-MK72AA

MPL-B330P-MK72AA Image 1 thumbnail
MPL-B330P-MK72AA Image 2 thumbnail
Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-B330P-MK72AA
Series: MPL Servo Motors
UPC: 820919980619

Description:

The MPL-B330P-MK72AA, which is a 400 Volts servo motor, is an Allen Bradley product, has a rated speed of approximately 5000 (rpm) revolutions per minute (maximum possible speed). It has low inertia and provides high torque as an output. This motor uses circular DIN connectors. It comes with a 3 inch magnetic stack length and a 100 mm frame, as well as an IEC 72-1 mounting flange with type FF holes. It offers a feedback system too that is encoder-based.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$1,856.00

Available: 13

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$1,485.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a MPL-B330P-MK72AA? We can help!

Request a Quote

Key Features:

  • comes with 400 volts for voltage class

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen Bradley's MPL-B330P-MK72AA is an MP series product. This series includes rotary servo motors with permanent magnets. This motor achieves the purpose of providing higher torques with lower motor inertia. That implies it has higher torque to size ratio. It is an alternating current (AC) machine and requires a voltage value of 400 volts for its function. 

The MPL-B330P-MK72AA's mechanical structure has the following specifications: a stack length of 76.2 millimeters, a frame size of 100 millimeters,  two (2) circular DIN connectors for feedback and power, an IEC metric mounting flange with free (type FF) mounting holes, key-less as well as the seal-less shaft. This motor incorporates feedback with high resolution to attain the required speed and position. The battery-less feedback system consists of a multi-turn encoder to provide feedback for the exact position within 4096 turns.

The rated (maximum) speed (rotary) of the MPL-B330P-MK72AA is 5000 rpm. It can provide up to 4.18 Newton-meters of torque continuously. It has the ability to supply an 11.1 Newton-meter of torque for an extremely short interval of time (achievable peak value of torque). This motor has 1800 watts of rated output power and inertia of 0.00012 kilograms meter-square. The whole motor assembly weighs around 10 pounds. It is rated to handle a radial load force of 74 and 43 kilograms at 1000 rpm (revolutions per minute) and 5000 rpm, respectively. It is rated to handle an axial load force of 27 and 13 kilograms at 1000 rpm (revolutions per minute) and 5000 rpm, respectively. 

Technical Specifications

MPN MPL-B330P-MK72AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 400V
Frame Size 100 mm
Magnetic Stack Length 3 in
Rated Speed 5000 rpm
Feeback Multi-turn high-resolution encoder
Shaft Key/Seal No shaft key/no shaft seal
Connectors Circular DIN, right angle, 180 degree rotatable
Brake No brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-B330P-MK72AA?

Answer: Yes. We offer repairs for the MPL-B330P-MK72AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B330P-MK72AA?

Answer: If you buy the MPL-B330P-MK72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-B330P-MK72AA online?

Answer: Yes. Automation Stop sells the MPL-B330P-MK72AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-B330P-MK72AA?

Answer: The MPL-B330P-MK72AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-B330P-MK72AA?

Answer: The MPL-B330P-MK72AA is part of the MPL Servo Motors series.


Question: Does the Rockwell Automation MPL-B330P-MK72AA have a Brake?

Answer: No brake.


Question: What is the Connectors of the Rockwell-Automation MPL-B330P-MK72AA?

Answer: The Rockwell-Automation MPL-B330P-MK72AA has a Connectors of Circular DIN, right angle, 180 degree rotatable.


Question: What Factory Designated Options are included with the MPL-B330P-MK72AA?

Answer: The MPL-B330P-MK72AA includes Standard for its Factory Designated Options.


Question: What Feeback does the Rockwell Automation MPL-B330P-MK72AA have?

Answer: The Rockwell Automation MPL-B330P-MK72AA has a Multi-turn high-resolution encoder Feeback.


Question: What is the Frame Size of the Allen Bradley Automation MPL-B330P-MK72AA?

Answer: The MPL-B330P-MK72AA has a Frame Size of 100 mm.


Question: What is the Magnetic Stack Length of the MPL-B330P-MK72AA?

Answer: The Magnetic Stack Length of the MPL-B330P-MK72AA is 3 in .


Question: What Mounting Flange is included with the MPL-B330P-MK72AA?

Answer: The Allen Bradley Automation MPL-B330P-MK72AA has a IEC Metric Mounting Flange.


Question: What Rated Speed does the MPL-B330P-MK72AA have?

Answer: The Rated Speed of the Rockwell Automation MPL-B330P-MK72AA is 5000 revolutions per minute (RPM).


Question: Does the Allen Bradley/Rockwell Automation MPL-B330P-MK72AA have a Shaft Key/Seal?

Answer: No shaft key/no shaft seal.


Question: What Voltage Class does the Allen Bradley-Rockwell Automation MPL-B330P-MK72AA have?

Answer: The Allen Bradley-Rockwell Automation MPL-B330P-MK72AA has a Voltage Class of 400V.


Series information for MPL-B330P-MK72AA

For additional information about MPL-B330P-MK72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B330P-MK72AA.

Revision Part # Also Known As Availability
MPL-B330P-MK72AA/A MPL-B330P-MK72AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-B33OP-MK72AA
  • MPL-8330P-MK72AA
  • MPL-833OP-MK72AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP