GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B330P-SJ22AA |
Series: | MPL Servo Motors |
Description:
Part number MPL-B330P-SJ22AA is a servo motor with low-inertia and higher torque output by Allen-Bradley. It features a 3-inch of permanent magnets stack and a flat mounting flange with 100 millimeters of IEC frame. It offers an absolute encoder ((-E, -S) single-turn) for feedback and an optional key for the shaft. It has circular connectors of bayonet type. It uses armature winding that belongs to the 400 volt alternating current (AC) class winding.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley servo motor, MPL-B330P-SJ22AA, is particularly engineered to provide larger torques while maintaining low motor inertia. It employs permanent magnets layered together for a cumulative length of three (3) inches to meet the goal of a high ratio of output torque/motor inertia. It features an IEC frame with a size measuring one hundred (100) millimeters and mechanical interlocks of type FF. This motor's armature windings are of voltage class B. This servo motor requires four hundred (400) volts alternating current (AC) of power to operate properly.
The smart motor technology of MPL-B330P-SJ22AA allows seamless control and communication with Kinetix drives that actually are suitable with this motor, like Kinetix 5700, Kinetix 7000, and so on. It implements a hiperface feedback mechanism, which although using fewer connections, delivers great resolution. This protocol is implemented using the absolute single-turn encoder. For output connections (whether power or feedback), it employs bayonet connectors with a high degree of joint tightness, which are positioned in a way to face the shaft.
Part number MPL-B330P-SJ22AA has a rated rotor speed of five thousand (5000) rev/minute (rpm) and potential of 11.1 Newton meters of peak stall torque, 1800 watts of output, and 4.18 Newton meters of steady stall torque. This motor weighs approximately 4.6 kilograms. However, this motor does not offer the option of a holding brake. It can hold a maximum radial load of 74 kilograms and a maximum radial load of 27 kilograms. While withstanding these load forces, this motor speed approaches the lowest value of one thousand (1000) rev/minute (rpm).
MPN | MPL-B330P-SJ22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 100 mm |
Magnetic Stack Length | 3 in |
Rated Speed | 5000 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B330P-SJ22AA?
Answer: Yes. We offer repairs for the MPL-B330P-SJ22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B330P-SJ22AA?
Answer: If you buy the MPL-B330P-SJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B330P-SJ22AA online?
Answer: Yes. Automation Stop sells the MPL-B330P-SJ22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B330P-SJ22AA?
Answer: The MPL-B330P-SJ22AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B330P-SJ22AA?
Answer: The MPL-B330P-SJ22AA is part of the MPL Servo Motors series.
Question: Does the MPL-B330P-SJ22AA have a Brake?
Answer: No brake.
Question: What Connectors are included with the Allen Bradley/Rockwell Automation MPL-B330P-SJ22AA?
Answer: The Allen Bradley/Rockwell Automation MPL-B330P-SJ22AA has Connectors Circular bayonet, facing shaft.
Question: What Factory Designated Options are included with the Rockwell Automation MPL-B330P-SJ22AA?
Answer: The MPL-B330P-SJ22AA has Factory Designated Options Standard.
Question: What Feeback does the Allen Bradley-Rockwell Automation MPL-B330P-SJ22AA have?
Answer: The Allen Bradley-Rockwell Automation MPL-B330P-SJ22AA has a Single-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the MPL-B330P-SJ22AA?
Answer: The Rockwell Automation MPL-B330P-SJ22AA has a Frame Size of 100 mm.
Question: What is the Magnetic Stack Length of the MPL-B330P-SJ22AA?
Answer: The Magnetic Stack Length of the Allen Bradley MPL-B330P-SJ22AA is 3 in .
Question: What Mounting Flange is included with the Rockwell-Automation MPL-B330P-SJ22AA?
Answer: The MPL-B330P-SJ22AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the Rockwell Automation MPL-B330P-SJ22AA have?
Answer: The Rated Speed of the Rockwell Automation MPL-B330P-SJ22AA is 5000 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the MPL-B330P-SJ22AA have?
Answer: The MPL-B330P-SJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What Voltage Class does the Rockwell-Automation MPL-B330P-SJ22AA have?
Answer: The MPL-B330P-SJ22AA has a Voltage Class of 400V.
For additional information about MPL-B330P-SJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B330P-SJ22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B330P-SJ22AA/A | MPL-B330P-SJ22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.