GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B420P-HJ24AA |
Series: | MPL Servo Motors |
Description:
The Allen-Bradley produced MPL-B420P-HJ24AA AC servo motor has a 5000 revolutions per minute (rpm) speed rating. It has a circular bayonet, facing shaft servo cable connectors on top of the motor, and it runs on 400 volts AC power. Additionally, if stopping is required, this drive has a brake mechanism in the motor. Furthermore, this Allen-Bradley servo motor is equipped with a shaft key. However, it does not have a shaft seal.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The MPL-B420P-HJ24AA servo motor from Allen-Bradley is a 400-volt AC brushless servo motor with a holding brake designed to meet the demanding demands of a commercial motion controlling system. This small, high-output servo motor from Allen-Bradley's MP low-inertia servo motor series has much greater torque performance than traditional servo motors, making it appropriate for automotive, packing, conversion, metal shaping, handling of materials, and electronics assembly. This MPL-B420P-HJ24AA servo motor includes a base motor speed of 5000 rpm and a peak torque of 120 pounds per inch. This motor has a 460-volt alternating current (AC) rating and a maximum operating current flow of 22.0 amperes.
The MPL-B420P-HJ24AA servo motor has a spring-set 24 volts DC holding brake and an onboard greater-performance 2000-line encoding updated control module. All MP range servo motors feature smart motor technologies, which feature an internal memory that retains the motor profiles, as well as the ability to link the motor configuration to motion systems immediately upon startup. The MPL-B420P-HJ24AA servo motor has a 115-millimeter frame size, a magnetic stack length of 2 inches, a horizontal kind of shaft with a shaft key, and an IP 51 approved industrial enclosure. It has the unique SpeedTEC circular DIN connector, which allows for a variety of connecting orientations, as well as the single-cable system that is accepted by all MP class servo motors. The MPL-B420P-HJ24AA servo motor has an operating non-condensing moisture range of 5% to 95% and an ambient operating temperature range of 0 to 40 degrees Celsius. All MP series motors are UL, CSA, and CE certified.
MPN | MPL-B420P-HJ24AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 115 mm |
Magnetic Stack Length | 2 in |
Rated Speed | 5000 rpm |
Feeback | 2000 line encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | 24V DC brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B420P-HJ24AA?
Answer: Yes. We offer repairs for the MPL-B420P-HJ24AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B420P-HJ24AA?
Answer: If you buy the MPL-B420P-HJ24AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B420P-HJ24AA online?
Answer: Yes. Automation Stop sells the MPL-B420P-HJ24AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B420P-HJ24AA?
Answer: The MPL-B420P-HJ24AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B420P-HJ24AA?
Answer: The MPL-B420P-HJ24AA is part of the MPL Servo Motors series.
Question: What is the Brake of the MPL-B420P-HJ24AA?
Answer: The MPL-B420P-HJ24AA has a Brake of 24 volts direct current (DC) brake.
Question: What kind of Connectors does the MPL-B420P-HJ24AA have?
Answer: The MPL-B420P-HJ24AA has Connectors Circular bayonet, facing shaft.
Question: What kind of Factory Designated Options does the MPL-B420P-HJ24AA have?
Answer: The Allen-Bradley MPL-B420P-HJ24AA includes Standard for its Factory Designated Options.
Question: What is the Feeback of the MPL-B420P-HJ24AA?
Answer: The MPL-B420P-HJ24AA has a Feeback of 2000 line encoder.
Question: What is the Frame Size of the Rockwell-Automation MPL-B420P-HJ24AA?
Answer: The Frame Size of the MPL-B420P-HJ24AA is 115 mm .
Question: What Magnetic Stack Length does the MPL-B420P-HJ24AA have?
Answer: The Magnetic Stack Length of the MPL-B420P-HJ24AA is 2 in.
Question: What Mounting Flange is included with the Rockwell Automation MPL-B420P-HJ24AA?
Answer: The MPL-B420P-HJ24AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the MPL-B420P-HJ24AA have?
Answer: The Rated Speed of the MPL-B420P-HJ24AA is 5000 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the Allen-Bradley MPL-B420P-HJ24AA have?
Answer: The MPL-B420P-HJ24AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Class of the Allen-Bradley MPL-B420P-HJ24AA?
Answer: The MPL-B420P-HJ24AA has a Voltage Class of 400V.
For additional information about MPL-B420P-HJ24AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B420P-HJ24AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B420P-HJ24AA/A | MPL-B420P-HJ24AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.