GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-B420P-MJ72AA

✓ In Stock

MPL-B420P-MJ72AA Image 1 thumbnail
MPL-B420P-MJ72AA Image 2 thumbnail
Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-B420P-MJ72AA
Series: MPL Servo Motors

Description:

The Allen Bradley MPL-B420P-MJ72AA is a servo motor belonging to the 400-volt voltage class of servo motors. This device has a rated inertia of 0.00026 kg-m�. The rated speed of this servo motor is 5000 revolutions per minute (rpm). This product has a frame size of 4. The magnetic stacks of this motor measure 2.0 inches. This unit has a rated power output of 1.9 kilowatts, as well as a continuous stall torque of 4.74 Nm and a peak stall torque of 13.5 Nm.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$2,895.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$2,316.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a MPL-B420P-MJ72AA? We can help!

Request a Quote

Key Features:

  • contains iec metric mounting flange
  • has 400v for voltage class

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The MPL-B420P-MJ72AA is a part of the Allen Bradley Premium permanent magnet low inertia series of servo motors. This servo motor belongs to the 400-volt voltage class with an inertia of 0.00026 kg-m². This servo motor has a rated speed of 5000 revolutions per minute (rpm), with a continuous stall torque of 4.74 Nm (Newton-meters). The peak stall torque of this servo motor is 13.5 Nm. This servo motor has a size 4 frame that measures 115 millimeters. The magnetic stack length of this motor is 2.0 inches, or the equivalent of 50.8 mm. The output power of this motor is rated at 1.9 kilowatts. The Hiperface protocol is used within this servo motor. This protocol makes sure that a minimum number of wires or cables are used inside the servo motor to give it a compact and small design body. The motor encoder is an absolute encoder with a multi-turn 1024 sin/cos feedback system. The enclosures of this servo motor are IP50 and IP66 rated, and IEC metric certified. The servo motor has a shaft key that locks the shaft of the motor with a small rectangle or square indent that secures the shaft from misplacing. Unfortunately, the motor does not have a shaft seal that protects the motor from water and moisture content from entering. Due to this, regular maintenance is highly encouraged. There is a circular connector for the servo motor for connections. There is no brake inside for the motor according to all the standard motor settings. The motor weighs approximately 4.3 kilograms, or 9.4 pounds.

Technical Specifications

MPN MPL-B420P-MJ72AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 400V
Frame Size 115 mm
Magnetic Stack Length 2 in
Rated Speed 5000 rpm
Feeback Multi-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular DIN, right angle, 180 degree rotatable
Brake No brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-B420P-MJ72AA?

Answer: Yes. We offer repairs for the MPL-B420P-MJ72AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B420P-MJ72AA?

Answer: If you buy the MPL-B420P-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-B420P-MJ72AA online?

Answer: Yes. Automation Stop sells the MPL-B420P-MJ72AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-B420P-MJ72AA?

Answer: The MPL-B420P-MJ72AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-B420P-MJ72AA?

Answer: The MPL-B420P-MJ72AA is part of the MPL Servo Motors series.


Question: Does the MPL-B420P-MJ72AA have a Brake?

Answer: No brake.


Question: What Connectors does the Rockwell-Automation MPL-B420P-MJ72AA have?

Answer: The Connectors of the Rockwell-Automation MPL-B420P-MJ72AA is Circular DIN, right angle, 180 degree rotatable.


Question: What kind of Factory Designated Options does the MPL-B420P-MJ72AA have?

Answer: The MPL-B420P-MJ72AA includes Standard for its Factory Designated Options.


Question: What Feeback does the Allen Bradley Automation MPL-B420P-MJ72AA have?

Answer: The Allen Bradley Automation MPL-B420P-MJ72AA has a Multi-turn high-resolution encoder Feeback.


Question: What Frame Size does the Rockwell Automation MPL-B420P-MJ72AA have?

Answer: The MPL-B420P-MJ72AA has a Frame Size of 115 mm .


Question: What Magnetic Stack Length does the Rockwell Automation MPL-B420P-MJ72AA have?

Answer: The MPL-B420P-MJ72AA has a Magnetic Stack Length of 2 in.


Question: What Mounting Flange does the Allen Bradley Automation MPL-B420P-MJ72AA have?

Answer: The Allen Bradley Automation MPL-B420P-MJ72AA has a IEC Metric Mounting Flange.


Question: What is the Rated Speed of the Allen Bradley MPL-B420P-MJ72AA?

Answer: The Rated Speed of the MPL-B420P-MJ72AA is 5000 revolutions per minute (RPM).


Question: What Shaft Key/Seal does the Allen Bradley MPL-B420P-MJ72AA have?

Answer: The MPL-B420P-MJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What is the Voltage Class of the Rockwell Automation MPL-B420P-MJ72AA?

Answer: The MPL-B420P-MJ72AA has a Voltage Class of 400V.


Series information for MPL-B420P-MJ72AA

For additional information about MPL-B420P-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B420P-MJ72AA.

Revision Part # Also Known As Availability
MPL-B420P-MJ72AA/A MPL-B420P-MJ72AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-B42OP-MJ72AA
  • MPL-8420P-MJ72AA
  • MPL-842OP-MJ72AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP