GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-B430P-SJ72AA

✓ In Stock

MPL-B430P-SJ72AA Image 1 thumbnail
MPL-B430P-SJ72AA Image 2 thumbnail
MPL-B430P-SJ72AA Image 3 thumbnail
Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-B430P-SJ72AA
Series: MPL Servo Motors

Description:

The Allen-Bradley MPL-B430P-SJ72AA is a servo motor with low-inertia and high torque output. This motor has a rated output power of 2.94 Hp, a rotor inertia of 0.0033 lb-in-sec2, and a peak stall torque of 175 lb-in. The frame size of this device is 4.5 inches. It can be connected remotely by ControlLogix controller through servo drive and perform high performance motion control. The operating temperature range of this device is 32 to 104 degrees Fahrenheit.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$5,600.00

Available: 1

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$2,249.00

Available: 17

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$1,800.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a MPL-B430P-SJ72AA? We can help!

Request a Quote

Key Features:

  • contains iec metric mounting flange
  • has 400v for voltage class

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley MPL-B430P-SJ72AA, which is a member of the Kinetix MP series of products, is a brushless servo motor with low-inertia and high torque output. This motor has a rated output power of 2.94 Hp (horsepower), the rotor inertia is 0.0033 lb-in-sec2, and the peak stall torque is one hundred and seventy-five (175) lb-in. The frame size is 4.5 inches and the rated speed is five thousand (5000) rpm, or revolutions per minute. The feedback that comes from motor drive to drive controller is enabled using high-resolution encoder (1024 Sin/Cos) so we can make precision closed loop motion control. The main thing with motor control are 2 points – the first is to chose the right motor type and output power and the second is to adjust motor drive with motor rotational load in order not to stall, vibrating or does not work at all. The feedback from motor drive can very precisely determine the position of motor shaft. With this motor it is easy to control many loads because of its high torque. It can be connected to Kinetix drive and then controlled by ControlLogix controller, of course, compatibility must be provided. The network capability enables remote control and monitoring. Usually this motor is used in industrial high performance robotics applications. The MPL-B430P-SJ72AA must work in specified environmental conditions in order to provide the long lasting. The range of the operating temperature is thirty-two to one hundred and four (32 to 104) degrees Fahrenheit and the storage temperature should be from fourteen to one hundred and eighty-five (14 to 185) degrees Fahrenheit. The relative humidity should remain between 20% and 85%, non-condensing.

Technical Specifications

MPN MPL-B430P-SJ72AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 400V
Frame Size 115 mm
Magnetic Stack Length 3 in
Rated Speed 5000 rpm
Feeback Single-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular DIN, right angle, 180 degree rotatable
Brake No brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-B430P-SJ72AA?

Answer: Yes. We offer repairs for the MPL-B430P-SJ72AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B430P-SJ72AA?

Answer: If you buy the MPL-B430P-SJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-B430P-SJ72AA online?

Answer: Yes. Automation Stop sells the MPL-B430P-SJ72AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-B430P-SJ72AA?

Answer: The MPL-B430P-SJ72AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-B430P-SJ72AA?

Answer: The MPL-B430P-SJ72AA is part of the MPL Servo Motors series.


Question: Does the Allen Bradley-Rockwell Automation MPL-B430P-SJ72AA have a Brake?

Answer: No brake.


Question: What is the Connectors of the MPL-B430P-SJ72AA?

Answer: The Rockwell-Automation MPL-B430P-SJ72AA has a Connectors of Circular DIN, right angle, 180 degree rotatable.


Question: What Factory Designated Options are included with the Allen Bradley MPL-B430P-SJ72AA?

Answer: The Allen Bradley MPL-B430P-SJ72AA includes Standard for its Factory Designated Options.


Question: What Feeback does the Rockwell Automation MPL-B430P-SJ72AA have?

Answer: The MPL-B430P-SJ72AA has a Single-turn high-resolution encoder Feeback.


Question: What Frame Size does the Allen Bradley/Rockwell Automation MPL-B430P-SJ72AA have?

Answer: The Frame Size of the MPL-B430P-SJ72AA is 115 mm .


Question: What Magnetic Stack Length does the MPL-B430P-SJ72AA have?

Answer: The Allen-Bradley MPL-B430P-SJ72AA has a Magnetic Stack Length of 3 in .


Question: What Mounting Flange does the MPL-B430P-SJ72AA have?

Answer: The MPL-B430P-SJ72AA has a IEC Metric Mounting Flange.


Question: What is the Rated Speed of the Allen-Bradley MPL-B430P-SJ72AA?

Answer: The Rated Speed of the MPL-B430P-SJ72AA is 5000 revolutions per minute (RPM).


Question: What Shaft Key/Seal is included with the MPL-B430P-SJ72AA?

Answer: The MPL-B430P-SJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What Voltage Class does the Allen-Bradley MPL-B430P-SJ72AA have?

Answer: The Voltage Class of the MPL-B430P-SJ72AA is 400V.


Series information for MPL-B430P-SJ72AA

For additional information about MPL-B430P-SJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B430P-SJ72AA.

Revision Part # Also Known As Availability
MPL-B430P-SJ72AA/A MPL-B430P-SJ72AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-B430P-5J72AA
  • MPL-B43OP-SJ72AA
  • MPL-B43OP-5J72AA
  • MPL-8430P-SJ72AA
  • MPL-8430P-5J72AA
  • MPL-843OP-SJ72AA
  • MPL-843OP-5J72AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP