GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-B430P-SJ74AA

✓ In Stock

MPL-B430P-SJ74AA Image 1 thumbnail
MPL-B430P-SJ74AA Image 2 thumbnail
Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-B430P-SJ74AA
Series: MPL Servo Motors

Description:

MPL-B430P-SJ74AA is based on smart motor technology and is the smaller size servo motor with higher torques by Allen Bradley. It has the following performance, electrical and mechanical features: 115 mm frame, 76.2 mm magnetic stack (mm: millimeters), 400 volts AC winding, 24 Volts DC brake (AC: alternating current, DC: direct current), DIN connectors, low inertia, 360 degrees feedback, keyed shaft, IEC free mounting holes, 5000 rev/min speed and 6.55 newton-meters continuous stall torque.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$3,051.00

Available: 18

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$2,441.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a MPL-B430P-SJ74AA? We can help!

Request a Quote

Key Features:

  • incorporates circular din, right angle, 180 rotatable connector
  • offers iec metric mounting flange
  • comes with 400v for voltage class

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen Bradley MP series, MPL-B430P-SJ74AA, high output, low inertia brushless servo motor use unique design characteristics to reduce the motor size while nevertheless providing significantly more torque. It is a synchronous motor and features 400V-class windings. The MPL-B430P-SJ74AA requires an alternating current, and its winding voltage has an AC rating. Instead of the rotor winding, it has strong permanent magnets to generate a magnetic field, and its stack covers a total length of 3.00 inches.  Due to this, this motor can achieve a speed of 5000 rpm ( revolutions / minute) while the size of the motor is relatively small. The module's frame is just 115 millimeters and the whole motor weight (including brake) is 16 lbs (pounds). But the dimensions of the frame match with the IEC 72-1 measurement, and this motor is a flat mounted type. 
MPL-B430P-SJ74AA uses a traditional rotary encoder, a single-turn encoder,  that delivers feedback for 360 degrees (one turn). It comes with a mechanical keyed shaft to provide good fitting. It has an electromechanical brake, which is DC operated (direct current). And, it needs 0.57 amperes to 0.704 amperes and 24 Volts DC.  This brake is actually a holding brake. It is used to keep the load in place when the main power is dropped. Either servo drives are used to control it (through the automatic program), or operators can handle it by attaching an external supply. It has circular DIN contact connectors for all connections such as feedback, power supply, and brake. 

Technical Specifications

MPN MPL-B430P-SJ74AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 400V
Frame Size 115 mm
Magnetic Stack Length 3 in
Rated Speed 5000 rpm
Feeback Single-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular DIN, right angle, 180 degree rotatable
Brake 24V DC brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-B430P-SJ74AA?

Answer: Yes. We offer repairs for the MPL-B430P-SJ74AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B430P-SJ74AA?

Answer: If you buy the MPL-B430P-SJ74AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-B430P-SJ74AA online?

Answer: Yes. Automation Stop sells the MPL-B430P-SJ74AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-B430P-SJ74AA?

Answer: The MPL-B430P-SJ74AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-B430P-SJ74AA?

Answer: The MPL-B430P-SJ74AA is part of the MPL Servo Motors series.


Question: What is the Brake of the MPL-B430P-SJ74AA?

Answer: The MPL-B430P-SJ74AA has a Brake of 24 volts direct current brake.


Question: What Connectors does the Rockwell-Automation MPL-B430P-SJ74AA have?

Answer: The Connectors of the Rockwell-Automation MPL-B430P-SJ74AA is Circular DIN, right angle, 180 degree rotatable.


Question: What kind of Factory Designated Options does the MPL-B430P-SJ74AA have?

Answer: The MPL-B430P-SJ74AA has Factory Designated Options Standard.


Question: What Feeback does the MPL-B430P-SJ74AA have?

Answer: The MPL-B430P-SJ74AA has a Single-turn high-resolution encoder Feeback.


Question: What is the Frame Size of the MPL-B430P-SJ74AA?

Answer: The Frame Size of the Rockwell Automation MPL-B430P-SJ74AA is 115 mm .


Question: What Magnetic Stack Length does the Rockwell Automation MPL-B430P-SJ74AA have?

Answer: The Magnetic Stack Length of the Rockwell Automation MPL-B430P-SJ74AA is 3 in .


Question: What Mounting Flange is included with the Allen Bradley MPL-B430P-SJ74AA?

Answer: The Allen Bradley MPL-B430P-SJ74AA has a IEC Metric Mounting Flange.


Question: What is the Rated Speed of the Allen Bradley/Rockwell Automation MPL-B430P-SJ74AA?

Answer: The Rated Speed of the MPL-B430P-SJ74AA is 5000 revolutions per minute (RPM).


Question: What Shaft Key/Seal does the Allen-Bradley MPL-B430P-SJ74AA have?

Answer: The MPL-B430P-SJ74AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What Voltage Class does the MPL-B430P-SJ74AA have?

Answer: The Rockwell Automation MPL-B430P-SJ74AA has a Voltage Class of 400V.


Series information for MPL-B430P-SJ74AA

For additional information about MPL-B430P-SJ74AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B430P-SJ74AA.

Revision Part # Also Known As Availability
MPL-B430P-SJ74AA/A MPL-B430P-SJ74AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-B430P-5J74AA
  • MPL-B43OP-SJ74AA
  • MPL-B43OP-5J74AA
  • MPL-8430P-SJ74AA
  • MPL-8430P-5J74AA
  • MPL-843OP-SJ74AA
  • MPL-843OP-5J74AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP