GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B4560F-MJ72AA |
Series: | MPL Servo Motors |
Description:
Allen-Bradley's MPL-B4560F-MJ72AA is an AC premium servo motor. It is a low inertia motor with permanent magnets. It has a nominally rated armature winding with a voltage of 400 volts, a frame size of 130 millimeters, a magnetic stack that measures 6 inches, and it has a rated speed of 3000 rpm. It features multi-turn encoder feedback and DIN connectors. However, this device has no seal shaft. This servo motor weighs approximately 11.83 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The MPL-B4560F-MJ72AA by the Allen Bradley/ Rockwell Automation is a rotary servo motor and belongs to a premium MPL series motor. It's a permanent magnet motor to ensure low rotor inertia, a compact structure, and high output. It uses an input power of 400 volts alternating current as it has an armature winding of 400 volts and yields 3.2 kilowatts. It has a nominal maximum velocity of 3000 rpm and rotating inertia of 0.00078 kg-m². It can supply continuous 14.1 Newton-meter (N.m) stall torque and peak stall torque of 34.4 Nm. Part number MPL-B4560F-MJ72AA comes with a multi-turn and high precision encoder with a Stegmann protocol for definitive feedback. It has circular DIN connectors that rotate 180 degrees. The shaft comes with no seal. However, it includes a key for secure and rigid contact. It encloses a 130-millimeter frame, a standard IEC 72-1 dimension, and a 6-inch magnetic stack length. It weighs roughly 11.82 kilograms and has the capacity to bear radial shaft loads of 95 kilograms (kg) at 3000 rpm, 119 kg at 2000 rpm, and 151 kg at 1000 rpm. Similarly, it has specific ratings for axial loads, which include 30 kg at 3000 rpm, 30 kg at 2000 rpm, and 24 kg at 1000 rpm. It ensures a minimum environmental rating of IP50, extendable to IP66. It is compatible with Kinetix 300/ 350 / 5500 /2000 / 5700 / 6000/ 6200 / 6500, and 7000 servo drives. It offers a smart motor technology to enable communication with these drives.
MPN | MPL-B4560F-MJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Frame Size | 165 mm |
Magnetic Stack Length | 6 in |
Rated Speed | 3000 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B4560F-MJ72AA?
Answer: Yes. We offer repairs for the MPL-B4560F-MJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B4560F-MJ72AA?
Answer: If you buy the MPL-B4560F-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B4560F-MJ72AA online?
Answer: Yes. Automation Stop sells the MPL-B4560F-MJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B4560F-MJ72AA?
Answer: The MPL-B4560F-MJ72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B4560F-MJ72AA?
Answer: The MPL-B4560F-MJ72AA is part of the MPL Servo Motors series.
Question: Does the Rockwell-Automation MPL-B4560F-MJ72AA have a Brake?
Answer: No brake.
Question: What Connectors does the MPL-B4560F-MJ72AA have?
Answer: The Allen Bradley MPL-B4560F-MJ72AA has a Connectors of Circular DIN, right angle, 180 degree rotatable.
Question: What kind of Factory Designated Options does the Allen-Bradley MPL-B4560F-MJ72AA have?
Answer: The Allen-Bradley MPL-B4560F-MJ72AA includes Standard for its Factory Designated Options.
Question: What Feeback does the Allen Bradley MPL-B4560F-MJ72AA have?
Answer: The MPL-B4560F-MJ72AA has a Multi-turn high-resolution encoder Feeback.
Question: What Frame Size does the Rockwell-Automation MPL-B4560F-MJ72AA have?
Answer: The MPL-B4560F-MJ72AA has a Frame Size of 165 mm.
Question: What Magnetic Stack Length does the Rockwell Automation MPL-B4560F-MJ72AA have?
Answer: The Rockwell Automation MPL-B4560F-MJ72AA has a Magnetic Stack Length of 6 in.
Question: What Mounting Flange is included with the MPL-B4560F-MJ72AA?
Answer: The Allen Bradley/Rockwell Automation MPL-B4560F-MJ72AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-B4560F-MJ72AA?
Answer: The Rated Speed of the MPL-B4560F-MJ72AA is 3000 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the MPL-B4560F-MJ72AA?
Answer: The Rockwell Automation MPL-B4560F-MJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.
For additional information about MPL-B4560F-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B4560F-MJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B4560F-MJ72AA/A | MPL-B4560F-MJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.