GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B540K-MJ74AA |
Series: | MPL Servo Motors |
Description:
Part number MPL-B540K-MJ74AA, is an Allen-Bradley servo motor with a rated velocity of 4000 revolutions per minute (rpm). It retains low inertia and feeds high torque as it has permanent magnets. This motor employs DIN connectors and comes with a 4.0-inch magnetic stack and a 165-millimeter frame. This servo drive is equipped with an IEC 72-1 mounting flange frame with free holes. It presents a feedback technique, as well as a holding brake.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley's MPL-B540K-MJ74AA is a member of its MP family, which contains rotary servo motors incorporating permanent magnets. This motor meets the goal of producing larger torques while retaining reduced shaft inertia. Subsequently, it has a greater torque-to-size proportion. It is the synchronous and alternating current (AC) motion system that takes up a value of 400 volts to work. The hardware of the MPL-B540K-MJ74AA includes a magnetic stack for permanent magnets and high-rare earth magnets, with a length of 101.6 millimeters. It also includes a frame, IEC metric, with free holes to mount it on any surface and a length of 165 millimeters. It also includes two (2) rotating DIN connectors. The fittings allow connectors to move 180 degrees both ways. It has a seal-less shaft offering the option of a key for a strong connection. To achieve the appropriate position and velocity, this motor integrates feedback. The battery-free feedback mechanism is made up of a multiturn encoder that provides feedback for the precise location around 4096 rotations. The MPL-B540K-MJ74AA has a maximum rated velocity of 4000 revolutions per minute (rpm). It can constantly output up to 19.4 Newton-meters of stall torque. It has the potential of outputting 8.64 Newton-meters of stall torque in a quite brief span of time. This motor has a rated output power of 5400 watts and inertia of 0.00147 kg-m². The entire motor unit weighs about forty (40) pounds. It is intended to carry radial loads of 90 kilograms and 114 kilograms at 3000 and 2000 revolutions per minute (rpm), respectively. It is also intended to carry axial loads of 26 kilograms and 35 kilograms at 4000 and 1000 revolutions per minute, respectively. To keep the load still at some specified position, it includes a holding brake that is driven by a direct current of 24 volts.
MPN | MPL-B540K-MJ74AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 165 mm |
Magnetic Stack Length | 4 in |
Rated Speed | 4000 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | 24V DC brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B540K-MJ74AA?
Answer: Yes. We offer repairs for the MPL-B540K-MJ74AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B540K-MJ74AA?
Answer: If you buy the MPL-B540K-MJ74AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B540K-MJ74AA online?
Answer: Yes. Automation Stop sells the MPL-B540K-MJ74AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B540K-MJ74AA?
Answer: The MPL-B540K-MJ74AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B540K-MJ74AA?
Answer: The MPL-B540K-MJ74AA is part of the MPL Servo Motors series.
Question: What is the Brake of the Allen Bradley MPL-B540K-MJ74AA?
Answer: The MPL-B540K-MJ74AA has a Brake of 24 volts direct current brake.
Question: What is the Connectors of the Allen Bradley-Rockwell Automation MPL-B540K-MJ74AA?
Answer: The Allen Bradley-Rockwell Automation MPL-B540K-MJ74AA has a Connectors of Circular DIN, right angle, 180 degree rotatable.
Question: What Factory Designated Options are included with the Rockwell Automation MPL-B540K-MJ74AA?
Answer: The Rockwell Automation MPL-B540K-MJ74AA includes Standard for its Factory Designated Options.
Question: What Feeback does the MPL-B540K-MJ74AA have?
Answer: The MPL-B540K-MJ74AA has a Multi-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the Allen-Bradley MPL-B540K-MJ74AA?
Answer: The Frame Size of the MPL-B540K-MJ74AA is 165 mm.
Question: What Magnetic Stack Length does the MPL-B540K-MJ74AA have?
Answer: The Magnetic Stack Length of the Rockwell Automation MPL-B540K-MJ74AA is 4 in.
Question: What Mounting Flange is included with the Allen Bradley/Rockwell Automation MPL-B540K-MJ74AA?
Answer: The Allen Bradley/Rockwell Automation MPL-B540K-MJ74AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-B540K-MJ74AA?
Answer: The Allen Bradley/Rockwell Automation MPL-B540K-MJ74AA has a Rated Speed of 4000 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the MPL-B540K-MJ74AA?
Answer: The MPL-B540K-MJ74AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Class of the MPL-B540K-MJ74AA?
Answer: The MPL-B540K-MJ74AA has a Voltage Class of 400V.
For additional information about MPL-B540K-MJ74AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B540K-MJ74AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B540K-MJ74AA/A | MPL-B540K-MJ74AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.