GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B560F-SJ72AA |
Series: | MPL Servo Motors |
Description:
Allen-Bradley's MPL-B560F-SJ72AA is a rotary brushless servo motor. It is classified as AC rated at an input of 400 volts alternating current (AC). This motor can offer a lot of torque to load and keep the rotor's inertia at a low value. It has a 165-millimeter diameter frame with an IEC-metric rating of 72-1 and free mounting holes. It spotlights the greatest possible rotational speed of 3000 revolutions per minute, DIN connections, and a feedback system.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley / Rockwell automation's MPL servo motor, MPL- B560F-SJ72AA, is intended to fulfill the high-performance objectives, such as precision, efficiency, and accuracy of motion systems. To design and implement the feedback system into this motor, it pursues a single-turn rotary encoder, but its feedback is limited to one rotation of the shaft (360 degrees). It is an IEC 72 - 1 motor with permanent magnets, a frame size of 165 millimeters, and a magnetic stack of 152.4 millimeters. To install this motor on any surface or equipment, it has free mounting holes.
MPL- B560F-SJ72AA features a compact construction and low rotor inertia while ensuring high torque output. A high torque to size ratio is one of the best features that this motor can offer. It also offers the possibility of toughening the shaft connection with a shaft key. Speedtech connectors of DIN type are present in this motor for cable connections, including power and feedback cables. You can adjust the position of the connector to -180 degrees and +180 degrees from its installed position. Since it has 400-volt class B armature windings, it requires an alternating current (AC) supply that can supply 400 volts AC. It is designed for a constant stalled torque of 237 lb-in. and a peak stalled torque of 600 lb-in. It has a peak rotation velocity of 3000 revolutions per minute. This motor can withstand an axial load force of 92 pounds at zero radial load and 71 pounds at a maximum radial load of 234 pounds at this rpm.
MPN | MPL-B560F-SJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 165 mm |
Magnetic Stack Length | 6 in |
Rated Speed | 3000 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B560F-SJ72AA?
Answer: Yes. We offer repairs for the MPL-B560F-SJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B560F-SJ72AA?
Answer: If you buy the MPL-B560F-SJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B560F-SJ72AA online?
Answer: Yes. Automation Stop sells the MPL-B560F-SJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B560F-SJ72AA?
Answer: The MPL-B560F-SJ72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B560F-SJ72AA?
Answer: The MPL-B560F-SJ72AA is part of the MPL Servo Motors series.
Question: Does the MPL-B560F-SJ72AA have a Brake?
Answer: No brake.
Question: What is the Connectors of the MPL-B560F-SJ72AA?
Answer: The Connectors of the MPL-B560F-SJ72AA is Circular DIN, right angle, 180 degree rotatable.
Question: What Factory Designated Options are included with the Allen-Bradley MPL-B560F-SJ72AA?
Answer: The Allen-Bradley MPL-B560F-SJ72AA includes Standard for its Factory Designated Options.
Question: What Feeback is included with the MPL-B560F-SJ72AA?
Answer: The MPL-B560F-SJ72AA has a Single-turn high-resolution encoder Feeback.
Question: What Frame Size does the Allen Bradley-Rockwell Automation MPL-B560F-SJ72AA have?
Answer: The Allen Bradley-Rockwell Automation MPL-B560F-SJ72AA has a Frame Size of 165 mm.
Question: What is the Magnetic Stack Length of the Allen-Bradley MPL-B560F-SJ72AA?
Answer: The MPL-B560F-SJ72AA has a Magnetic Stack Length of 6 in.
Question: What Mounting Flange does the MPL-B560F-SJ72AA have?
Answer: The MPL-B560F-SJ72AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-B560F-SJ72AA?
Answer: The Rated Speed of the Allen Bradley-Rockwell Automation MPL-B560F-SJ72AA is 3000 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the MPL-B560F-SJ72AA have?
Answer: The Allen Bradley-Rockwell Automation MPL-B560F-SJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What Voltage Class does the MPL-B560F-SJ72AA have?
Answer: The Allen Bradley MPL-B560F-SJ72AA has a Voltage Class of 400V.
For additional information about MPL-B560F-SJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B560F-SJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B560F-SJ72AA/A | MPL-B560F-SJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.