GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

MPL-B680F-SJ22AA

Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-B680F-SJ22AA
Series: MPL Servo Motors

Description:

The Allen-Bradley MPL-B680F-SJ22AA MP series low-inertia servo motor provides an efficient solution to reduce the motor size and deliver a high continuous torque of 60 newton-meters, peak torque of 108.5 newton-meters, an output torque motor of 7.5 kilowatts and a high rated speed of 3000 revolutions per minute at 400 volts AC with a 215 mm frame size. This Allen-Bradley MPL-B680F-SJ22AA three-phase AC servo motor can be employed with the Allen-Bradley Kinetix 6000, 6200, 6500, 300 and Kinetix 350 servo drive series for high-performance motion control systems. This Allen-Bradley MPL-B680F-SJ22AA AC servo motor offers an enhanced winding insulation material to improve heat transfer and thermal management. This low-inertia AC servo motor can operate at a temperature range of 0 degrees to 40 degrees Celsius (32 degrees to 104 degrees Fahrenheit) for industrial applications.


Key Features:

  • offers a voltage class of 400 volts ac

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley MPL-B680F-SJ22AA MP series low-inertia servo motor provides efficient solution to reduce the motor size and deliver a high continuous torque of 60 newton-meters, peak torque of 108.5 newton-meters, an output torque motor of 7.5 kilowatts and a high rated speed of 3000 revolutions per minute at 400 volts AC with 215 mm frame size. This Allen-Bradley MPL-B680F-SJ22AA three-phase AC servo motor can be employed with the Allen-Bradley Kinetix 6000, 6200, 6500, 300, and Kinetix 350 servo drive series for high-performance motion control systems. This Allen-Bradley MPL-B680F-SJ22AA AC servo motor offers an enhanced winding insulation material to improve heat transfer and thermal management. The Allen-Bradley MPL-B680F-SJ22AA includes an integral 24-volt DC brake. This Allen-Bradley MPL-B680F-SJ22AA MP series low-inertia servo motor produces torque efficiently over a large speed range and includes a very high energy rare-earth Allen-Bradley magnets to rapidly accelerate the motor.

The Allen-Bradley MPL-B680F-SJ22AA AC servo motor includes high-resolution encoders which can be used as a part of the Kinetix safe-off feature. The Allen-Bradley MPL-B680F-SJ22AA MP series low-inertia servo motor has a circular bayonet connector which uses a single cable and permits flexible orientation of connectors. This Allen-Bradley MPL-B680F-SJ22AA MP series low-inertia servo motor offers field-reversible motor connectors. This Allen-Bradley MPL-B680F-SJ22AA MP series low-inertia servo motor is designed to meet IP66 enclosure environmental rating and standard IEC 72-1 installing dimensions. This Allen-Bradley MPL-B680F-SJ22AA MP series low-inertia servo motor can operate at a temperature range of 0 degrees to 40 degrees Celsius (32 degrees to 104 degrees Fahrenheit) for industrial applications.

Technical Specifications

MPN MPL-B680F-SJ22AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 400V
Frame Size 215 mm large frame motors
Magnetic Stack Length 8 in
Rated Speed 3000 rpm
Feeback Single-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular bayonet, facing shaft
Brake No brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-B680F-SJ22AA?

Answer: Yes. We offer repairs for the MPL-B680F-SJ22AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B680F-SJ22AA?

Answer: If you buy the MPL-B680F-SJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-B680F-SJ22AA online?

Answer: Yes. Automation Stop sells the MPL-B680F-SJ22AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-B680F-SJ22AA?

Answer: The MPL-B680F-SJ22AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-B680F-SJ22AA?

Answer: The MPL-B680F-SJ22AA is part of the MPL Servo Motors series.


Question: Does the Allen-Bradley MPL-B680F-SJ22AA have a Brake?

Answer: No brake.


Question: What kind of Connectors does the Rockwell-Automation MPL-B680F-SJ22AA have?

Answer: The Rockwell-Automation MPL-B680F-SJ22AA has Connectors Circular bayonet, facing shaft.


Question: What Factory Designated Options are included with the MPL-B680F-SJ22AA?

Answer: The MPL-B680F-SJ22AA has Factory Designated Options Standard.


Question: What Feeback is included with the Rockwell Automation MPL-B680F-SJ22AA?

Answer: The MPL-B680F-SJ22AA has a Single-turn high-resolution encoder Feeback.


Question: What Frame Size does the MPL-B680F-SJ22AA have?

Answer: The Allen Bradley Automation MPL-B680F-SJ22AA has a Frame Size of 215 mm large frame motors.


Question: What Magnetic Stack Length does the Allen Bradley Automation MPL-B680F-SJ22AA have?

Answer: The Magnetic Stack Length of the Allen Bradley Automation MPL-B680F-SJ22AA is 8 in.


Question: What Mounting Flange is included with the MPL-B680F-SJ22AA?

Answer: The Allen Bradley-Rockwell Automation MPL-B680F-SJ22AA has a IEC Metric Mounting Flange.


Question: What is the Rated Speed of the MPL-B680F-SJ22AA?

Answer: The Allen-Bradley MPL-B680F-SJ22AA has a Rated Speed of 3000 revolutions per minute (RPM).


Question: What Shaft Key/Seal is included with the MPL-B680F-SJ22AA?

Answer: The MPL-B680F-SJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What Voltage Class does the Allen Bradley-Rockwell Automation MPL-B680F-SJ22AA have?

Answer: The Allen Bradley-Rockwell Automation MPL-B680F-SJ22AA has a Voltage Class of 400V.


Series information for MPL-B680F-SJ22AA

For additional information about MPL-B680F-SJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B680F-SJ22AA.

Revision Part # Also Known As Availability
MPL-B680F-SJ22AA/A MPL-B680F-SJ22AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-B680F-5J22AA
  • MPL-B68OF-SJ22AA
  • MPL-B68OF-5J22AA
  • MPL-B6B0F-SJ22AA
  • MPL-B6B0F-5J22AA
  • MPL-B6BOF-SJ22AA
  • MPL-B6BOF-5J22AA
  • MPL-BG80F-SJ22AA
  • MPL-BG80F-5J22AA
  • MPL-BG8OF-SJ22AA
  • MPL-BG8OF-5J22AA
  • MPL-BGB0F-SJ22AA
  • MPL-BGB0F-5J22AA
  • MPL-BGBOF-SJ22AA
  • MPL-BGBOF-5J22AA
  • MPL-8680F-SJ22AA
  • MPL-8680F-5J22AA
  • MPL-868OF-SJ22AA
  • MPL-868OF-5J22AA
  • MPL-86B0F-SJ22AA
  • MPL-86B0F-5J22AA
  • MPL-86BOF-SJ22AA
  • MPL-86BOF-5J22AA
  • MPL-8G80F-SJ22AA
  • MPL-8G80F-5J22AA
  • MPL-8G8OF-SJ22AA
  • MPL-8G8OF-5J22AA
  • MPL-8GB0F-SJ22AA
  • MPL-8GB0F-5J22AA
  • MPL-8GBOF-SJ22AA
  • MPL-8GBOF-5J22AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP