GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | MPM-B1151F-MJ74AA |
Series: | MPM Servo Motors |
Description:
The Allen Bradley MPM-B1151F-MJ74AA servo motor has medium inertia. It has a base speed of 3000 rev/min, a rated speed of 4000 rpm, and a maximum speed of 5000 rpm. It has a multiturn encoder, a continuous output torque of 2.18 Newton meters, alternating current windings of 460 volts, a voltage class of 400 volts, a frame size of 115 millimeters, and one magnet stack. It also includes keyed shafts with brakes and circular DIN connections. It has a maximum operating temperature of 40 degrees.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley MP-Series Medium Inertia (MPM) AC premium servo motor includes the MPM-B1151F-MJ74AA. It has 180-degree rotating DIN connections with IEC 72 -1 metric mounting dimensions. Flexible connection alignment is possible with these connectors, allowing for more efficient wiring routing. This motor has the same output torque and speed efficiency, feedback mechanisms and protocols, and rotor inertia as normal motors, making the transition extremely easy. The MPM-B1151F-MJ74AA has a base speed of 3000 revolutions per minute (rpm) and a maximum speed of 5000 rpm. It has a rated power of 0.75 kilowatts and a rated speed of 4000 revolutions per minute. It has a constant stall torque of 2.18 Newton meters (Nm) and current output of 2.7 amperes (A). Peak stall torque and current are both 6.6 Nm and 9.9 A.
The rotor inertia is 0.00065 kilograms per square meter. It has a 400 volt alternating current voltage rating (VAC). This motor has a magnet stack of single stack length and is furnished with permanent magnets (rare earth). Its armature windings are rated at 460 VAC. It features a direct current holding brake of 24 volts and a multiturn feedback type with a resolution of 1024 cycles per rotation. It comes with a hiperface feedback protocol. The MPM-B1151F-MJ74AA features a 115 millimeter frame. It weighs around 3.45 kg. It has an IP rating of 50 without shaft seals. A motor can be classified as IP67 if it has cable connections that are environmentally friendly and its shaft has a seal. It, too, has a keyed shaft, but no seal exists on the shaft that can be added externally to increase the motor's IP rating.
MPN | MPM-B1151F-MJ74AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Medium-inertia Servo Motor with 115mm to 215 mm Frame Size |
Voltage Class | 400V |
Frame Size-Bolt Circle Diameter | 115 mm |
Magnet Stacks | 1 stack |
Base Speed | 3000 rpm |
Feedback | Multi-turn high-resolution encoder |
Enclosure/Shaft Key/Shaft Seal | IP65/IP67 housing/shaft key/no shaft seal |
Connectors | Circluar, right angle, 180 degree rotatable |
Brake | 24V DC brake |
Mounting Flange | IEC metric |
Factory Designated Options | Standard factory configuration |
Question: Does Automation Stop offer repairs on the MPM-B1151F-MJ74AA?
Answer: Yes. We offer repairs for the MPM-B1151F-MJ74AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPM-B1151F-MJ74AA?
Answer: If you buy the MPM-B1151F-MJ74AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPM-B1151F-MJ74AA online?
Answer: Yes. Automation Stop sells the MPM-B1151F-MJ74AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPM-B1151F-MJ74AA?
Answer: The MPM-B1151F-MJ74AA is made by Allen Bradley - Motors.
Question: What type of product is the MPM-B1151F-MJ74AA?
Answer: The MPM-B1151F-MJ74AA is part of the MPM Servo Motors series.
Question: What is the Base Speed of the MPM-B1151F-MJ74AA?
Answer: The Base Speed of the Rockwell-Automation MPM-B1151F-MJ74AA is 3000 revolutions per minute (RPM).
Question: What is the Brake of the MPM-B1151F-MJ74AA?
Answer: The Brake of the Allen Bradley/Rockwell Automation MPM-B1151F-MJ74AA is 24 volts direct current (DC) brake.
Question: What Connectors does the MPM-B1151F-MJ74AA have?
Answer: The Connectors of the MPM-B1151F-MJ74AA is Circluar, right angle, 180 degree rotatable.
Question: What Enclosure/Shaft Key/Shaft Seal does the MPM-B1151F-MJ74AA have?
Answer: The Enclosure/Shaft Key/Shaft Seal of the Allen Bradley-Rockwell Automation MPM-B1151F-MJ74AA is IP65/IP67 housing/shaft key/no shaft seal.
Question: What Factory Designated Options are included with the MPM-B1151F-MJ74AA?
Answer: The MPM-B1151F-MJ74AA includes Standard factory configuration for its Factory Designated Options.
Question: What Feedback is included with the MPM-B1151F-MJ74AA?
Answer: The MPM-B1151F-MJ74AA has a Multi-turn high-resolution encoder Feedback.
Question: What Frame Size-Bolt Circle Diameter does the Allen Bradley/Rockwell Automation MPM-B1151F-MJ74AA have?
Answer: The Frame Size-Bolt Circle Diameter of the MPM-B1151F-MJ74AA is 115 mm.
Question: What Magnet Stacks does the MPM-B1151F-MJ74AA have?
Answer: The Magnet Stacks of the Rockwell-Automation MPM-B1151F-MJ74AA is 1 stack.
Question: What Mounting Flange does the Rockwell Automation MPM-B1151F-MJ74AA have?
Answer: The Rockwell Automation MPM-B1151F-MJ74AA has a IEC metric Mounting Flange.
Question: What is the Voltage Class of the Allen Bradley Automation MPM-B1151F-MJ74AA?
Answer: The Allen Bradley Automation MPM-B1151F-MJ74AA has a Voltage Class of 400V.
For additional information about MPM-B1151F-MJ74AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPM-B1151F-MJ74AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPM-B1151F-MJ74AA/A | MPM-B1151F-MJ74AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.