GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | MPM-B1304E-SJ72AA |
Series: | MPM Servo Motors |
Description:
Part number MPM-B1304E-SJ72AA is a medium inertia brushless servo motor. This servo motor was designed and produced by Allen Bradley / Rockwell Automation. This servo motor has a SpeedTec connector that is capable of rotating up to 180 degrees. This is a 400-volt servo motor with a frame size of 130 millimeters. This motor has a base speed of 2250 revolutions per minute (rpm). The magnet stack length of this device is 4 stacks.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number MPM-B1304E-SJ72AA is a medium inertia servo motor by Allen Bradley / Rockwell Automation. It is a brushless and alternating current (AC) synchronous servo motor. It offers the features of an MP-Series servo motor along with the enhanced rotor inertia to accommodate greater inertial loads.
This motor can run at 2250 revolutions per minute (rpm) at rated full load and voltage. It can achieve a maximum speed of 4000 rpm. At the rated speed of 3500 rpm, the motor output is 2.20 kilowatts. This servo motor can produce 10.2 Newton-meters of torque continuously. It can produce up to 27.1 Newton-meters of torque for a very short period. This motor's shaft can bear the maximum radial load of 67 kilograms and axial load of 15 kilograms at 3000 rpm. It weighs around 9.60 kilograms. It has a standard IEC 72-1 mounting dimension.
This motor has an operational voltage rating of 400 volts alternating current. The frame size, or circle bolt diameter, of this servo motor measures 130 millimeters. This motor incorporates 4 stacks of rare-earth permanent magnets. This motor also incorporates a high-resolution feedback system for the accurate positioning of the rotor. A single-turn encoder is used in this motor to provide displacement feedback signals within 1 turn. This motor has an internal protection rating of IP65 and IP67 to provide protection against environmental factors. It comes with a shaft key that provides a rigid mechanical connection. It has circular connectors for feedback and power connections. The connector housing can be rotated up to 180 degrees.
MPN | MPM-B1304E-SJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Medium-inertia Servo Motor with 115mm to 215 mm Frame Size |
Voltage Class | 400V |
Frame Size-Bolt Circle Diameter | 130 mm |
Magnet Stacks | 4 stacks |
Base Speed | 2250 rpm |
Feedback | Single-turn high-resolution encoder |
Enclosure/Shaft Key/Shaft Seal | IP65/IP67 housing/shaft key/no shaft seal |
Connectors | Circluar, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC metric |
Factory Designated Options | Standard factory configuration |
Question: Does Automation Stop offer repairs on the MPM-B1304E-SJ72AA?
Answer: Yes. We offer repairs for the MPM-B1304E-SJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPM-B1304E-SJ72AA?
Answer: If you buy the MPM-B1304E-SJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPM-B1304E-SJ72AA online?
Answer: Yes. Automation Stop sells the MPM-B1304E-SJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPM-B1304E-SJ72AA?
Answer: The MPM-B1304E-SJ72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPM-B1304E-SJ72AA?
Answer: The MPM-B1304E-SJ72AA is part of the MPM Servo Motors series.
Question: What is the Base Speed of the MPM-B1304E-SJ72AA?
Answer: The Base Speed of the MPM-B1304E-SJ72AA is 2250 revolutions per minute (RPM).
Question: Does the Rockwell-Automation MPM-B1304E-SJ72AA have a Brake?
Answer: No brake.
Question: What is the Connectors of the MPM-B1304E-SJ72AA?
Answer: The Connectors of the Allen Bradley MPM-B1304E-SJ72AA is Circluar, right angle, 180 degree rotatable.
Question: What Enclosure/Shaft Key/Shaft Seal does the MPM-B1304E-SJ72AA have?
Answer: The Enclosure/Shaft Key/Shaft Seal of the Allen Bradley-Rockwell Automation MPM-B1304E-SJ72AA is IP65/IP67 housing/shaft key/no shaft seal.
Question: What Factory Designated Options are included with the Allen Bradley MPM-B1304E-SJ72AA?
Answer: The MPM-B1304E-SJ72AA includes Standard factory configuration for its Factory Designated Options.
Question: What Feedback does the Allen Bradley-Rockwell Automation MPM-B1304E-SJ72AA have?
Answer: The MPM-B1304E-SJ72AA has a Single-turn high-resolution encoder Feedback.
Question: What is the Frame Size-Bolt Circle Diameter of the MPM-B1304E-SJ72AA?
Answer: The Frame Size-Bolt Circle Diameter of the Allen-Bradley MPM-B1304E-SJ72AA is 130 mm.
Question: What is the Magnet Stacks of the MPM-B1304E-SJ72AA?
Answer: The Magnet Stacks of the Rockwell Automation MPM-B1304E-SJ72AA is 4 stacks.
Question: What Mounting Flange does the Rockwell Automation MPM-B1304E-SJ72AA have?
Answer: The Rockwell Automation MPM-B1304E-SJ72AA has a IEC metric Mounting Flange.
Question: What is the Voltage Class of the Allen Bradley-Rockwell Automation MPM-B1304E-SJ72AA?
Answer: The Voltage Class of the Allen Bradley-Rockwell Automation MPM-B1304E-SJ72AA is 400V.
For additional information about MPM-B1304E-SJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPM-B1304E-SJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPM-B1304E-SJ72AA/A | MPM-B1304E-SJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.