GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | MPM-B1652F-SJ72AA |
Series: | MPM |
Description:
Part number MPM-B1652F-SJ72AA is a medium inertia servo motor that was designed and manufactured by Allen Bradley / Rockwell Automation. This is a 400-volt servo motor that has a frame size, or bolt circle diameter, of 165 millimeters. This servo motor incorporates 2 stacks of permanent magnets. It has a base speed rated at 3000 revolutions per minute (rpm). This servo motor has an IP rating of IP65/IP67. This device includes a single-turn high-resolution encoder.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley MPM-B1652F-SJ72AA is a medium inertia servo motor. Additionally, this device is a brushless synchronous servo motor that runs on alternating current (AC). It combines the benefits of an MP-Series servo motor with increased rotor inertia to handle higher inertial loads. At rated full load and voltage, this motor can revolve at the speed of 3000 revolutions per minute (rpm). Its maximum speed is 4500 revolutions per minute. The motor output is 4.30 kilowatts at 3500 rpm, which is the rated speed. This servo motor can continuously provide 19.4 Newton-meters (Nm) of torque. It has the ability to create up to 48.0 Newton-meters (Nm) of torque only for a short period of time. At 3000 rpm, the shaft of this motor can withstand a maximum radial load of 104 kilograms, as well as an axial load of 25 kilograms. This servo motor has an approximate weight of 20.60 kilograms.
The operating voltage of this motor is 400 volts alternating current (AC). It has a frame with a diameter of 165 millimeters. Two (2) stacks of permanent magnets are used in this motor. This motor has a high-resolution feedback mechanism that allows the rotor to be precisely positioned. This motor uses a single-turn encoder to give displacement feedback signals every turn. This servo motor has an IP rating of IP65/IP67. It has a shaft key that ensures a secure mechanical connection. For feedback and power connections, it includes circular connectors. The connection housing may be adjusted up 180 degrees.
MPN | MPM-B1652F-SJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Medium-inertia Servo Motor with 115mm to 215 mm Frame Size |
Voltage Class | 400V |
Frame Size-Bolt Circle Diameter | 165 mm |
Magnet Stacks | 2 stacks |
Base Speed | 3000 rpm |
Feedback | Single-turn high-resolution encoder |
Enclosure/Shaft Key/Shaft Seal | IP65/IP67 housing/shaft key/no shaft seal |
Connectors | Circluar, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC metric |
Factory Designated Options | Standard factory configuration |
Question: Does Automation Stop offer repairs on the MPM-B1652F-SJ72AA?
Answer: Yes. We offer repairs for the MPM-B1652F-SJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPM-B1652F-SJ72AA?
Answer: If you buy the MPM-B1652F-SJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPM-B1652F-SJ72AA online?
Answer: Yes. Automation Stop sells the MPM-B1652F-SJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPM-B1652F-SJ72AA?
Answer: The MPM-B1652F-SJ72AA is made by Allen Bradley - Motors.
Question: What Base Speed does the Allen Bradley MPM-B1652F-SJ72AA have?
Answer: The Base Speed of the MPM-B1652F-SJ72AA is 3000 revolutions per minute (RPM).
Question: Does the Allen Bradley-Rockwell Automation MPM-B1652F-SJ72AA have a Brake?
Answer: No brake.
Question: What Connectors does the MPM-B1652F-SJ72AA have?
Answer: The Connectors of the MPM-B1652F-SJ72AA is Circluar, right angle, 180 degree rotatable.
Question: What Enclosure/Shaft Key/Shaft Seal does the Rockwell-Automation MPM-B1652F-SJ72AA have?
Answer: The Rockwell-Automation MPM-B1652F-SJ72AA has a Enclosure/Shaft Key/Shaft Seal of IP65/IP67 housing/shaft key/no shaft seal.
Question: What kind of Factory Designated Options does the Allen Bradley/Rockwell Automation MPM-B1652F-SJ72AA have?
Answer: The MPM-B1652F-SJ72AA includes Standard factory configuration for its Factory Designated Options.
Question: What Feedback is included with the Allen Bradley-Rockwell Automation MPM-B1652F-SJ72AA?
Answer: The Allen Bradley-Rockwell Automation MPM-B1652F-SJ72AA has a Single-turn high-resolution encoder Feedback.
Question: What is the Frame Size-Bolt Circle Diameter of the Allen Bradley/Rockwell Automation MPM-B1652F-SJ72AA?
Answer: The Frame Size-Bolt Circle Diameter of the MPM-B1652F-SJ72AA is 165 mm.
Question: What Magnet Stacks does the MPM-B1652F-SJ72AA have?
Answer: The Magnet Stacks of the MPM-B1652F-SJ72AA is 2 stacks.
Question: What Mounting Flange is included with the Allen Bradley Automation MPM-B1652F-SJ72AA?
Answer: The MPM-B1652F-SJ72AA has a IEC metric Mounting Flange.
Question: What is the Voltage Class of the Rockwell-Automation MPM-B1652F-SJ72AA?
Answer: The MPM-B1652F-SJ72AA has a Voltage Class of 400V.
For additional information about MPM-B1652F-SJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPM-B1652F-SJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPM-B1652F-SJ72AA/A | MPM-B1652F-SJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.