GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

TLY-A130T-HK62AN

Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: TLY-A130T-HK62AN
Series: TLY and TL Servo Motors

Description:

The Allen-Bradley TLY-A130T-HK62AN is a servo motor designed for low inertia and high torque to size ratio but also to position precise applications. It has a rotor inertia of only 0.000027 lb-in-sec2, and a peak stall torque of 6.7 lb-in, while the output power is 0.19 Hp and the rotation speed is 6000 rpm. Usually, it is connected to CompactLogix L43 Controller and to Kinetix 2000 drive but can be used on any other similar control motion system.


Key Features:

  • has voltage of 200v
  • provides a rated speed of 6000 rpm
  • comes with cables with circular connectors, 1 m connector

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley TLY-A130T-HK62AN is a servo motor from TLY series. The TLY series has some characteristic parameters, of which are not only its small size and high torque, but also its very high torque to size ratio. That means, there are motors with higher torque but also bigger in size, so TLY series motors are small, but strong and fast devices. The rated speed of the TLY-A130T-HK62AN is 6000 rpm (revolutions per minute) and the peak stall torque is 6.7 lb-in. with the frame size of just 1.811 inches. This drive also offers feedback capabilities. The drive uses the line incremental encoder with 2000 lines per revolution. The resolution of encoder is 17 bit and it’s very high. The TLY-A130T-HK62AN has to overcome the total rotational inertia during startup and during rotational position changing. Otherwise, if the parameters are not setup correctly it will missing steps or stall or vibrating. This unit from TLY series, as a device with low inertia motors, in other words, has high load to motor rotor ratio. The rated output power of TLY-A130T-HK62AN is 0.19 Hp, the rotor inertia is 0.000027 lb-in-sec2, and the peak stall torque is 6.7 lb-in. The environmental conditions must be preserved in the rates of operating temperature and storage temperature. The operating temperature range that must be preserved is 0 to 40 degrees Celsius, or 32 to 104 degrees Fahrenheit and the storage temperature that must be preserved must stay within a range of -10 to 85 degrees Celsius, or 14 to 185 degrees Fahrenheit. The relative humidity should be 20% to 85% without condensation.

Technical Specifications

Manufacturer Allen Bradley
Series TL-Series Motors
Product Type Brushless AC Synchronous Servo Motors
Kinetix Compatibility offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives
Frame Sizes Metric and NEMA frame sizes
Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets
Cable Extensions 1 m (3.2ft)
Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information
Continuous stall torque 0.086...5.42 N*m (0.76...48 lb*in)
Peak stall torque 0.22...13 N*m (1.94...115 lb*in)
Motor rated output 0.037...2.0 kW
Compatible servo drives Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000
Voltage Class 200V-class windings
Frame Size 46 mm (1.81 in.) or NEMA 17
Motor stack length Three stack
Rated Speed 6000 rpm
Feedback 2000 lines/revolution, incremental encoder
Enclosure IP65 housing
Shaft key No Shaft key
Shaft Seal No Shaft seal
Connectors Cables with circular connectors, 1 m (39.4 in.)
Brake No Brake
Factory Options NEMA
MPN TLY-A130T-HK62AN
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the TLY-A130T-HK62AN?

Answer: Yes. We offer repairs for the TLY-A130T-HK62AN and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and TLY-A130T-HK62AN?

Answer: If you buy the TLY-A130T-HK62AN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the TLY-A130T-HK62AN online?

Answer: Yes. Automation Stop sells the TLY-A130T-HK62AN online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the TLY-A130T-HK62AN?

Answer: The TLY-A130T-HK62AN is made by Allen Bradley - Motors.


Question: What type of product is the TLY-A130T-HK62AN?

Answer: The TLY-A130T-HK62AN is part of the TLY and TL Servo Motors series.


Question: Does the Allen Bradley TLY-A130T-HK62AN have a Brake?

Answer: No Brake.


Question: What Cable Extensions does the TLY-A130T-HK62AN have?

Answer: The Cable Extensions of the TLY-A130T-HK62AN is 1 m (3.2ft).


Question: What kind of Certifications does the Rockwell Automation TLY-A130T-HK62AN have?

Answer: The Rockwell Automation TLY-A130T-HK62AN has Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information.


Question: What is the Compatible servo drives of the Allen Bradley/Rockwell Automation TLY-A130T-HK62AN?

Answer: The Compatible servo drives of the Allen Bradley/Rockwell Automation TLY-A130T-HK62AN is Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000.


Question: What Connectors does the Allen Bradley-Rockwell Automation TLY-A130T-HK62AN have?

Answer: The Connectors of the Allen Bradley-Rockwell Automation TLY-A130T-HK62AN is Cables with circular connectors, 1 m (39.4 in.).


Question: What Continuous stall torque does the Allen Bradley TLY-A130T-HK62AN have?

Answer: The Continuous stall torque of the Allen Bradley TLY-A130T-HK62AN is 0.086...5.42 N*m (0.76...48 lb*in).


Question: What is the Enclosure of the TLY-A130T-HK62AN?

Answer: The Allen-Bradley TLY-A130T-HK62AN has a Enclosure of IP65 housing.


Question: What kind of Factory Options does the Rockwell Automation TLY-A130T-HK62AN have?

Answer: The TLY-A130T-HK62AN includes NEMA for its Factory Options.


Question: What Feedback does the TLY-A130T-HK62AN have?

Answer: The Allen Bradley-Rockwell Automation TLY-A130T-HK62AN has a Feedback of 2000 lines/revolution, incremental encoder.


Question: What is the Frame Size of the TLY-A130T-HK62AN?

Answer: The Allen-Bradley TLY-A130T-HK62AN has a Frame Size of 46 mm (1.81 in.) or NEMA 17.


Question: What kind of Frame Sizes does the TLY-A130T-HK62AN have?

Answer: The TLY-A130T-HK62AN has Frame Sizes Metric and NEMA frame sizes.


Question: What is the Kinetix Compatibility of the TLY-A130T-HK62AN?

Answer: The TLY-A130T-HK62AN has a Kinetix Compatibility of offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives.


Question: What kind of Magnets does the Allen Bradley-Rockwell Automation TLY-A130T-HK62AN have?

Answer: The Allen Bradley-Rockwell Automation TLY-A130T-HK62AN has Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets.


Question: What is the Motor rated output of the TLY-A130T-HK62AN?

Answer: The Motor rated output of the Rockwell-Automation TLY-A130T-HK62AN is 0.037...2.0 kW.


Question: What Motor stack length is included with the Rockwell Automation TLY-A130T-HK62AN?

Answer: The TLY-A130T-HK62AN has a Three stack Motor stack length.


Question: What Peak stall torque does the Allen-Bradley TLY-A130T-HK62AN have?

Answer: The Peak stall torque of the Allen-Bradley TLY-A130T-HK62AN is 0.22...13 N*m (1.94...115 lb*in).


Question: What Product Type does the Rockwell-Automation TLY-A130T-HK62AN have?

Answer: The Rockwell-Automation TLY-A130T-HK62AN has a Brushless AC (alternating current) Synchronous Servo Motors Product Type.


Question: What Rated Speed does the TLY-A130T-HK62AN have?

Answer: The Rated Speed of the TLY-A130T-HK62AN is 6000 revolutions per minute (RPM).


Question: Does the Allen Bradley-Rockwell Automation TLY-A130T-HK62AN have a Shaft key?

Answer: No Shaft key.


Question: Does the Allen Bradley/Rockwell Automation TLY-A130T-HK62AN have a Shaft Seal?

Answer: No Shaft seal.


Question: What is the Voltage Class of the TLY-A130T-HK62AN?

Answer: The Voltage Class of the Allen Bradley/Rockwell Automation TLY-A130T-HK62AN is 200V-class windings.


Series information for TLY-A130T-HK62AN

For additional information about TLY-A130T-HK62AN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding TLY-A130T-HK62AN.

Revision Part # Also Known As Availability
TLY-A130T-HK62AN/A TLY-A130T-HK62AN Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • TLY-A130T-HKG2AN
  • TLY-A13OT-HK62AN
  • TLY-A13OT-HKG2AN
  • TLY-AI30T-HK62AN
  • TLY-AI30T-HKG2AN
  • TLY-AI3OT-HK62AN
  • TLY-AI3OT-HKG2AN

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP