GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | VPL-B0633M-PK14AA |
Series: | VPL Servo Motors |
Description:
Designed and manufactured by Allen Bradley / Rockwell Automation, part number VPL-B0633M-PK14AA is a low inertia servo motor from the Kinetix VP series of products. This motor belongs to the 400-volt voltage class of motors. It has a frame size of 63 millimeters and a magnet stack length of 3 stacks. The rated speed of this motor is 6000 rpm. This device is equipped with an 18-bit absolute multi-turn digital encoder for feedback purposes.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The VPL-B0633M-PK14AA is a servo motor that features a permanent magnet. The servo motor was designed and produced by Allen-Bradley / Rockwell Automation. This product is a low inertia servo motor that operates at a voltage of 400 volts AC. This servo motor has a rated speed of 6000 revolutions per minute (rpm). The frame of this servo motor measures approximately 63 millimeters. The VPL-B0633M-PK14AA servo motor has a magnet stack length of 3 stacks. This servo motor also features an 18-bit encoder that communicates with other devices via the DSL protocol. The motor shaft is smooth and there are no keys. Connections to the motor are made using a single SpeedTec DIN connector which can be rotated 325 degrees to make the connections. The VPL-B0633M-PK12AA motor has an integrated brake that operates at 24 volts DC. This product can be mounted using an IEC metric mounting flange, which includes free mounting holes that are Type FF. It is pre-configured with normal factory options. This motor should be operated and stored in a clean, dry environment. The servo motor must be operated in cool industrial environments with a max temperature of 40 degrees Celsius to avoid overheating. The VPL-B0633M-PK12AA should be placed in a non-corrosive environment since the enclosure does not offer protection against harmful vapors and other related factors. For setting up the drive, it is recommended to read through the product's manual. When maintaining and replacing the VPL-B0633M-PK14AA, be sure to unplug the servo motor from mains to avoid damage to the user, as well as the hardware.
MPN | VPL-B0633M-PK14AA |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Kinetix VP Low Intertia Servo Motor |
Voltage | 400 V |
Frame Size - Bolt Circle Diameter | 63 mm |
Magnet Stack Length | 3 |
Rated Speed | 6000 rpm |
Feedback | 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol) |
Shaft Key | Smooth shaft |
Connector | Single SpeedTec DIN connector, right angle, 325 degree rotatable |
Brake | 24V DC Brake |
Mounting Flange | IEC metric, free mounting holes (type FF) |
Factory Options | Standard |
Question: Does Automation Stop offer repairs on the VPL-B0633M-PK14AA?
Answer: Yes. We offer repairs for the VPL-B0633M-PK14AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and VPL-B0633M-PK14AA?
Answer: If you buy the VPL-B0633M-PK14AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the VPL-B0633M-PK14AA online?
Answer: Yes. Automation Stop sells the VPL-B0633M-PK14AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the VPL-B0633M-PK14AA?
Answer: The VPL-B0633M-PK14AA is made by Allen Bradley - Motors.
Question: What type of product is the VPL-B0633M-PK14AA?
Answer: The VPL-B0633M-PK14AA is part of the VPL Servo Motors series.
Question: What is the Brake of the VPL-B0633M-PK14AA?
Answer: The Brake of the VPL-B0633M-PK14AA is 24 volts direct current Brake.
Question: What Connector does the Allen Bradley VPL-B0633M-PK14AA have?
Answer: The Connector of the VPL-B0633M-PK14AA is Single SpeedTec DIN connector, right angle, 325 degree rotatable .
Question: What kind of Factory Options does the Rockwell-Automation VPL-B0633M-PK14AA have?
Answer: The VPL-B0633M-PK14AA includes Standard for its Factory Options.
Question: What is the Feedback of the VPL-B0633M-PK14AA?
Answer: The Feedback of the VPL-B0633M-PK14AA is 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).
Question: What is the Frame Size - Bolt Circle Diameter of the VPL-B0633M-PK14AA?
Answer: The Allen-Bradley VPL-B0633M-PK14AA has a Frame Size - Bolt Circle Diameter of 63 mm.
Question: What is the Magnet Stack Length of the VPL-B0633M-PK14AA?
Answer: The Magnet Stack Length of the VPL-B0633M-PK14AA is 3.
Question: What Mounting Flange is included with the Allen Bradley/Rockwell Automation VPL-B0633M-PK14AA?
Answer: The VPL-B0633M-PK14AA has a IEC metric, free mounting holes (type FF) Mounting Flange.
Question: What is the Rated Speed of the VPL-B0633M-PK14AA?
Answer: The Rated Speed of the Allen Bradley Automation VPL-B0633M-PK14AA is 6000 revolutions per minute (RPM).
Question: What Shaft Key is included with the Allen Bradley VPL-B0633M-PK14AA?
Answer: The VPL-B0633M-PK14AA has a Smooth shaft Shaft Key.
Question: What is the Voltage of the VPL-B0633M-PK14AA?
Answer: The Voltage of the Allen Bradley Automation VPL-B0633M-PK14AA is 400 V.
For additional information about VPL-B0633M-PK14AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-B0633M-PK14AA.
Revision Part # | Also Known As | Availability |
---|---|---|
VPL-B0633M-PK14AA/A | VPL-B0633M-PK14AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.