GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | VPL-B0753M-PK12AA |
Series: | VPL Servo Motors |
Description:
This low inertia servo motor, which has the product number VPL-B0753M-PK12AA, was designed and manufactured by Allen Bradley / Rockwell Automation. This servo motor is a 400-volt motor that was a frame size of 75 millimeters. The rated speed of this motor is 6000 rpm. It has a magnet stack length of three (3) stacks. This motor has one (1) SpeedTec DIN connector. The operating temperature of this motor should range from 0 to 40 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The VPL-B0753M-PK12AA is a high-end low inertia servo motor. It was designed and manufactured by Allen Bradley / Rockwell Automation. This model operates via a power supply with a rated input voltage of 400 volts AC. This motor has a rated speed of 6000 revolutions per minute (rpm). The frame size, or bolt circle diameter (BCD), of this motor measures 75 millimeters. Additionally, this motor has a magnet stack length that measures three (3) inches, or three (3) stacks. For the purposes of feedback, this low inertia servo motor is equipped with an 18-bit absolute multi-turn digital encoder. This encoder can give absolute position feedback within 4096 revolutions and is compatible with the Hiperface DSL protocol. This servo motor has a smooth shaft. This device does not have a brake. the mounting flange of this motor is an IEC metric mounting flange. It has free mounting holes that are of Type FF. This low inertia servo motor has a single SpeedTec DIN connector. This connector is positioned at a right angle and can be rotated a total of 325 degrees. This servo motor is optimized to the ratings of the Kinetix 5500 and 5700 servo drives. This motor utilizes permanent magnets. When operating this servo motor, the temperature of the area surrounding this motor should range from 0 to 40 degrees Celsius, or 32 to 104 degrees Fahrenheit. When storing this servo motor, however, the surrounding area's temperature should range from -30 to +40 degrees Celsius, or the equivalent range -22 to +104 degrees Fahrenheit.
MPN | VPL-B0753M-PK12AA |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Kinetix VP Low Intertia Servo Motor |
Voltage | 400 V |
Frame Size - Bolt Circle Diameter | 75 mm |
Magnet Stack Length | 3 |
Rated Speed | 6000 rpm |
Feedback | 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol) |
Shaft Key | Smooth shaft |
Connector | Single SpeedTec DIN connector, right angle, 325 degree rotatable |
Brake | No Brake |
Mounting Flange | IEC metric, free mounting holes (type FF) |
Factory Options | Standard |
Question: Does Automation Stop offer repairs on the VPL-B0753M-PK12AA?
Answer: Yes. We offer repairs for the VPL-B0753M-PK12AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and VPL-B0753M-PK12AA?
Answer: If you buy the VPL-B0753M-PK12AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the VPL-B0753M-PK12AA online?
Answer: Yes. Automation Stop sells the VPL-B0753M-PK12AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the VPL-B0753M-PK12AA?
Answer: The VPL-B0753M-PK12AA is made by Allen Bradley - Motors.
Question: What type of product is the VPL-B0753M-PK12AA?
Answer: The VPL-B0753M-PK12AA is part of the VPL Servo Motors series.
Question: Does the VPL-B0753M-PK12AA have a Brake?
Answer: No Brake.
Question: What is the Connector of the VPL-B0753M-PK12AA?
Answer: The Connector of the Rockwell Automation VPL-B0753M-PK12AA is Single SpeedTec DIN connector, right angle, 325 degree rotatable .
Question: What Factory Options are included with the Allen Bradley VPL-B0753M-PK12AA?
Answer: The Allen Bradley VPL-B0753M-PK12AA has Factory Options Standard.
Question: What is the Feedback of the VPL-B0753M-PK12AA?
Answer: The Allen-Bradley VPL-B0753M-PK12AA has a Feedback of 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).
Question: What is the Frame Size - Bolt Circle Diameter of the Allen Bradley Automation VPL-B0753M-PK12AA?
Answer: The VPL-B0753M-PK12AA has a Frame Size - Bolt Circle Diameter of 75 mm.
Question: What is the Magnet Stack Length of the VPL-B0753M-PK12AA?
Answer: The Magnet Stack Length of the VPL-B0753M-PK12AA is 3.
Question: What Mounting Flange does the Allen Bradley/Rockwell Automation VPL-B0753M-PK12AA have?
Answer: The Allen Bradley/Rockwell Automation VPL-B0753M-PK12AA has a IEC metric, free mounting holes (type FF) Mounting Flange.
Question: What Rated Speed does the Allen Bradley-Rockwell Automation VPL-B0753M-PK12AA have?
Answer: The VPL-B0753M-PK12AA has a Rated Speed of 6000 revolutions per minute (RPM).
Question: What Shaft Key is included with the VPL-B0753M-PK12AA?
Answer: The VPL-B0753M-PK12AA has a Smooth shaft Shaft Key.
Question: What Voltage does the Allen-Bradley VPL-B0753M-PK12AA have?
Answer: The Voltage of the VPL-B0753M-PK12AA is 400 V.
For additional information about VPL-B0753M-PK12AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-B0753M-PK12AA.
Revision Part # | Also Known As | Availability |
---|---|---|
VPL-B0753M-PK12AA/A | VPL-B0753M-PK12AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.