GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | VPL-B1002M-PJ14AA |
Series: | VPL Servo Motors |
Description:
Designed and produced by Allen Bradley / Rockwell Automation, part number VPL-B1002M-PJ14AA is a Kinetix VP low inertia servo motor. This is a 400-volt servo motor with a rated speed of 6000 revolutions per minute (rpm). This servo motor has a frame size that measures 100 millimeters. The magnetic stack length of this device is two (2) stacks. This motor is suitable for applications that require high-speed and high torque.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The VPL-B1002M-PJ14AA is a servo motor that belongs to the Allen Bradley. It consists of two (2) magnetic stacks and is a low-inertia type of servo motor. It is a brushless AC synchronous servo motor that has a rated voltage of 400 volts AC (alternating current). This servo motor has a rated speed of 6000 revolutions per minute (rpm). The frame size of this servo motor measures 100 millimeters. This motor is equipped with a shaft key and features a 24-volt DC (direct current) brake. This Allen Bradley servo drive has a SpeedTec DIN connector. This connector is attached at a right angle and can rotate up to 325 degrees. The mounting flange, whose measurement standards are IEC metric, has free mounting holes that are Type FF. This Allen Bradley servo motor is suitable for applications that require high speed and high torque.
The Allen Bradley VPL-B1002M-PJ14AA servo motor features a shunt module whose primary purpose is to protect the direct current (DC) bus system from overvoltage, which might lead to the damage of the servo drive. An overvoltage might arise when the servo motor is operating at a speed that exceeds the Bus overvoltage speed. This device has an 18-bit absolute multi-turn digital encoder that gives feedback within 4096 revolutions and is compatible with the Hiperface DSL protocol. The standard NEMA enclosure of this servo motor has an IP rating of IP50. This enclosure protects the servo motor against dust ingression. It does not have a shaft seal. The Allen Bradley VPL-B1002M-PJ14AA servo motor has a continuous stall torque of 0.46 to 33 Newton-meters.
MPN | VPL-B1002M-PJ14AA |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Kinetix VP Low Intertia Servo Motor |
Voltage | 400 V |
Frame Size - Bolt Circle Diameter | 100 mm |
Magnet Stack Length | 2 |
Rated Speed | 6000 rpm |
Feedback | 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol) |
Shaft Key | Shaft key |
Connector | Single SpeedTec DIN connector, right angle, 325 degree rotatable |
Brake | 24V DC Brake |
Mounting Flange | IEC metric, free mounting holes (type FF) |
Factory Options | Standard |
Question: Does Automation Stop offer repairs on the VPL-B1002M-PJ14AA?
Answer: Yes. We offer repairs for the VPL-B1002M-PJ14AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and VPL-B1002M-PJ14AA?
Answer: If you buy the VPL-B1002M-PJ14AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the VPL-B1002M-PJ14AA online?
Answer: Yes. Automation Stop sells the VPL-B1002M-PJ14AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the VPL-B1002M-PJ14AA?
Answer: The VPL-B1002M-PJ14AA is made by Allen Bradley - Motors.
Question: What type of product is the VPL-B1002M-PJ14AA?
Answer: The VPL-B1002M-PJ14AA is part of the VPL Servo Motors series.
Question: What is the Brake of the VPL-B1002M-PJ14AA?
Answer: The Brake of the VPL-B1002M-PJ14AA is 24 volts direct current Brake.
Question: What is the Connector of the VPL-B1002M-PJ14AA?
Answer: The Allen Bradley Automation VPL-B1002M-PJ14AA has a Connector of Single SpeedTec DIN connector, right angle, 325 degree rotatable .
Question: What Factory Options are included with the Rockwell-Automation VPL-B1002M-PJ14AA?
Answer: The VPL-B1002M-PJ14AA has Factory Options Standard.
Question: What is the Feedback of the VPL-B1002M-PJ14AA?
Answer: The Feedback of the Allen Bradley VPL-B1002M-PJ14AA is 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).
Question: What is the Frame Size - Bolt Circle Diameter of the VPL-B1002M-PJ14AA?
Answer: The VPL-B1002M-PJ14AA has a Frame Size - Bolt Circle Diameter of 100 mm.
Question: What is the Magnet Stack Length of the VPL-B1002M-PJ14AA?
Answer: The Allen Bradley Automation VPL-B1002M-PJ14AA has a Magnet Stack Length of 2.
Question: What Mounting Flange does the VPL-B1002M-PJ14AA have?
Answer: The Allen Bradley/Rockwell Automation VPL-B1002M-PJ14AA has a IEC metric, free mounting holes (type FF) Mounting Flange.
Question: What is the Rated Speed of the VPL-B1002M-PJ14AA?
Answer: The VPL-B1002M-PJ14AA has a Rated Speed of 6000 revolutions per minute (RPM).
Question: What Shaft Key does the VPL-B1002M-PJ14AA have?
Answer: The VPL-B1002M-PJ14AA has a Shaft key Shaft Key.
Question: What is the Voltage of the VPL-B1002M-PJ14AA?
Answer: The VPL-B1002M-PJ14AA has a Voltage of 400 V.
For additional information about VPL-B1002M-PJ14AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-B1002M-PJ14AA.
Revision Part # | Also Known As | Availability |
---|---|---|
VPL-B1002M-PJ14AA/A | VPL-B1002M-PJ14AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.