GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

VPL-B1152F-PJ14AA

Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: VPL-B1152F-PJ14AA
Series: VPL Servo Motors

Description:

Part number VPL-B1152F-PJ14AA is a low inertia servo motor as part of the Kinetix VP low inertia servo motor series. This product is classified as a 400-volt servo motor. It has frame that measures 115 millimeters, with a magnet stack length of 2 and a 4500 revolutions per minute (rpm) rated speed. It is equipped with 18-bit encoder. This device has a shaft key and single SpeedTec DIN connector for all signals. It has a 24-volt DC brake and an IEC metric mounting flange.


Key Features:

  • contains iec metric, free mounting holes (type ff) mounting flange
  • comes with shaft with shaft key

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number VPL-B1152F-PJ14AA is a servo motor, manufactured by Allen Bradley. It belongs to the Kinetix VP Low inertia Servo motors, including compact brushless motors for high-performance industrial applications and are widely used in industries like packaging, converting, material handling, electronic assembly, and automotive. The VPL-B1152F-PJ14AA unit is a 400-volt motor with a one hundred and fifteen (115)-millimeter frame bolt circle diameter. It has a magnet stack length equal to two (2), and has a rated speed of four thousand five hundred (4500) revolutions per minute (rpm). It has an eighteen (18)-bit absolute multi-turn digital encoder that provides absolute position feed-back within 4096 turns. It has a shaft key and one single SpeedTec DIN connector of a right angle that is rotatable at three hundred and twenty-five (325) degrees.

This unit has a twenty-four (24)-volt DC brake, and its mounting flange is type FF (free mounting holes) that follows the IEC metric standard. Running this motor allows the system to conform with a safety functional rating up to Performance Level d (PLd) and safety category 3 (Cat 3). It does not have an additional shaft seal and, for this reason, is recommended to use the motor for applications where the shaft area is free of dust and liquids. In case there is fine dust or significant amount of fluids in connection with the shaft, it is recommended to purchase separately shaft seal. To connect easily the motor with the drive system, a cable from the Kinetix 2090 family should be used.

Technical Specifications

MPN VPL-B1152F-PJ14AA
Manufacturer Allen Bradley / Rockwell Automation
Series Kinetix VP Low Intertia Servo Motor
Voltage 400 V
Frame Size - Bolt Circle Diameter 115 mm
Magnet Stack Length 2
Rated Speed 4500 rpm
Feedback 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol)
Shaft Key Shaft key
Connector Single SpeedTec DIN connector, right angle, 325 degree rotatable
Brake 24V DC Brake
Mounting Flange IEC metric, free mounting holes (type FF)
Factory Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the VPL-B1152F-PJ14AA?

Answer: Yes. We offer repairs for the VPL-B1152F-PJ14AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and VPL-B1152F-PJ14AA?

Answer: If you buy the VPL-B1152F-PJ14AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the VPL-B1152F-PJ14AA online?

Answer: Yes. Automation Stop sells the VPL-B1152F-PJ14AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the VPL-B1152F-PJ14AA?

Answer: The VPL-B1152F-PJ14AA is made by Allen Bradley - Motors.


Question: What type of product is the VPL-B1152F-PJ14AA?

Answer: The VPL-B1152F-PJ14AA is part of the VPL Servo Motors series.


Question: What Brake does the Allen Bradley/Rockwell Automation VPL-B1152F-PJ14AA have?

Answer: The VPL-B1152F-PJ14AA has a Brake of 24 volts direct current Brake.


Question: What is the Connector of the VPL-B1152F-PJ14AA?

Answer: The Connector of the Rockwell-Automation VPL-B1152F-PJ14AA is Single SpeedTec DIN connector, right angle, 325 degree rotatable .


Question: What kind of Factory Options does the Allen-Bradley VPL-B1152F-PJ14AA have?

Answer: The VPL-B1152F-PJ14AA includes Standard for its Factory Options.


Question: What is the Feedback of the VPL-B1152F-PJ14AA?

Answer: The Feedback of the VPL-B1152F-PJ14AA is 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).


Question: What Frame Size - Bolt Circle Diameter does the Rockwell-Automation VPL-B1152F-PJ14AA have?

Answer: The VPL-B1152F-PJ14AA has a Frame Size - Bolt Circle Diameter of 115 mm.


Question: What Magnet Stack Length does the Allen Bradley VPL-B1152F-PJ14AA have?

Answer: The Allen Bradley VPL-B1152F-PJ14AA has a Magnet Stack Length of 2.


Question: What Mounting Flange does the VPL-B1152F-PJ14AA have?

Answer: The Rockwell Automation VPL-B1152F-PJ14AA has a IEC metric, free mounting holes (type FF) Mounting Flange.


Question: What is the Rated Speed of the Allen Bradley-Rockwell Automation VPL-B1152F-PJ14AA?

Answer: The VPL-B1152F-PJ14AA has a Rated Speed of 4500 revolutions per minute (RPM).


Question: What Shaft Key is included with the VPL-B1152F-PJ14AA?

Answer: The Rockwell Automation VPL-B1152F-PJ14AA has a Shaft key Shaft Key.


Question: What Voltage does the Allen Bradley Automation VPL-B1152F-PJ14AA have?

Answer: The Allen Bradley Automation VPL-B1152F-PJ14AA has a Voltage of 400 V.


Series information for VPL-B1152F-PJ14AA

For additional information about VPL-B1152F-PJ14AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-B1152F-PJ14AA.

Revision Part # Also Known As Availability
VPL-B1152F-PJ14AA/A VPL-B1152F-PJ14AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • VPL-B1152F-PJI4AA
  • VPL-B11S2F-PJ14AA
  • VPL-B11S2F-PJI4AA
  • VPL-B1I52F-PJ14AA
  • VPL-B1I52F-PJI4AA
  • VPL-B1IS2F-PJ14AA
  • VPL-B1IS2F-PJI4AA
  • VPL-BI152F-PJ14AA
  • VPL-BI152F-PJI4AA
  • VPL-BI1S2F-PJ14AA
  • VPL-BI1S2F-PJI4AA
  • VPL-BII52F-PJ14AA
  • VPL-BII52F-PJI4AA
  • VPL-BIIS2F-PJ14AA
  • VPL-BIIS2F-PJI4AA
  • VPL-81152F-PJ14AA
  • VPL-81152F-PJI4AA
  • VPL-811S2F-PJ14AA
  • VPL-811S2F-PJI4AA
  • VPL-81I52F-PJ14AA
  • VPL-81I52F-PJI4AA
  • VPL-81IS2F-PJ14AA
  • VPL-81IS2F-PJI4AA
  • VPL-8I152F-PJ14AA
  • VPL-8I152F-PJI4AA
  • VPL-8I1S2F-PJ14AA
  • VPL-8I1S2F-PJI4AA
  • VPL-8II52F-PJ14AA
  • VPL-8II52F-PJI4AA
  • VPL-8IIS2F-PJ14AA
  • VPL-8IIS2F-PJI4AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP