GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | VPL-B1153F-PJ12AS |
Series: | VPL Servo Motors |
Description:
The VPL-B1153F-PJ12AS is a Kinetix VP Low Intertia Servo Motor Low-inertia Servo Motor that is branded and manufactured by Allen-Bradley and contains a 115 mm frame size. It has rated speed of 4500 rpm. This item ships with 3 magnet stacks. In addition this particular component ships with iec metric, free mounting holes (type ff) mounting flange.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
MPN | VPL-B1153F-PJ12AS |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Kinetix VP Low Intertia Servo Motor |
Voltage | 400 V |
Frame Size - Bolt Circle Diameter | 115 mm |
Magnet Stack Length | 3 |
Rated Speed | 4500 rpm |
Feedback | 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol) |
Shaft Key | Shaft key |
Connector | Single SpeedTec DIN connector, right angle, 325 degree rotatable |
Brake | No Brake |
Mounting Flange | IEC metric, free mounting holes (type FF) |
Factory Options | Shaft seal |
Question: Does Automation Stop offer repairs on the VPL-B1153F-PJ12AS?
Answer: Yes. We offer repairs for the VPL-B1153F-PJ12AS and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and VPL-B1153F-PJ12AS?
Answer: If you buy the VPL-B1153F-PJ12AS through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the VPL-B1153F-PJ12AS online?
Answer: Yes. Automation Stop sells the VPL-B1153F-PJ12AS online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the VPL-B1153F-PJ12AS?
Answer: The VPL-B1153F-PJ12AS is made by Allen Bradley - Motors.
Question: What type of product is the VPL-B1153F-PJ12AS?
Answer: The VPL-B1153F-PJ12AS is part of the VPL Servo Motors series.
Question: Does the Rockwell-Automation VPL-B1153F-PJ12AS have a Brake?
Answer: No Brake.
Question: What Connector does the Rockwell-Automation VPL-B1153F-PJ12AS have?
Answer: The VPL-B1153F-PJ12AS has a Connector of Single SpeedTec DIN connector, right angle, 325 degree rotatable .
Question: What Factory Options are included with the Allen-Bradley VPL-B1153F-PJ12AS?
Answer: The Allen-Bradley VPL-B1153F-PJ12AS includes Shaft seal for its Factory Options.
Question: What is the Feedback of the Allen Bradley VPL-B1153F-PJ12AS?
Answer: The Feedback of the VPL-B1153F-PJ12AS is 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).
Question: What is the Frame Size - Bolt Circle Diameter of the VPL-B1153F-PJ12AS?
Answer: The VPL-B1153F-PJ12AS has a Frame Size - Bolt Circle Diameter of 115 mm.
Question: What Magnet Stack Length does the VPL-B1153F-PJ12AS have?
Answer: The Magnet Stack Length of the VPL-B1153F-PJ12AS is 3.
Question: What Mounting Flange is included with the VPL-B1153F-PJ12AS?
Answer: The VPL-B1153F-PJ12AS has a IEC metric, free mounting holes (type FF) Mounting Flange.
Question: What Rated Speed does the VPL-B1153F-PJ12AS have?
Answer: The Rated Speed of the Rockwell Automation VPL-B1153F-PJ12AS is 4500 revolutions per minute (RPM).
Question: What Shaft Key is included with the Allen Bradley/Rockwell Automation VPL-B1153F-PJ12AS?
Answer: The VPL-B1153F-PJ12AS has a Shaft key Shaft Key.
Question: What is the Voltage of the VPL-B1153F-PJ12AS?
Answer: The Voltage of the Allen Bradley Automation VPL-B1153F-PJ12AS is 400 V.
For additional information about VPL-B1153F-PJ12AS check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-B1153F-PJ12AS.
Revision Part # | Also Known As | Availability |
---|---|---|
VPL-B1153F-PJ12AS/A | VPL-B1153F-PJ12AS Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.