GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

VPL-B1153F-PK14AA

Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: VPL-B1153F-PK14AA
Series: VPL Servo Motors

Description:

Produced by Allen-Bradley, Part Number VPL-B1153F-PK14AA is a Kinetix VP low inertia servo motor. It is in the four hundred (400) volt voltage class.The frame size of this component measures one hundred and fifteen (115) mm. The rated speed of this device is 4500 revolutions per minute, or rpm. It has a magnet stack of three (3). It is equipped with a twenty-four (24) volt direct current (DC) Brake. This device features a smooth shaft design.


Key Features:

  • ships with iec metric, free mounting holes (type ff) mounting flange
  • ships with smooth shaft

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$6,663.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$5,331.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a VPL-B1153F-PK14AA? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The VPL-B1153F-PK14AA is a Low Inertia Servo Motor. This device was manufactured by the Allen-Bradley company. The primary purpose of this component is to be applied to various machines and applications that are in an industrial environment. The machines that this device is usually applied to perform functions such as packaging, tooling, precise positioning, and so on. Additionally, the Allen-Bradley VPL-B1153F-PK14AA is compatible with various Kinetix servo drives. This component has a series type of low inertia and is classified under the voltage class 400 volt. With a frame size of only 115 millimeters, this device features three (3) magnet stacks and even has a four thousand five hundred (4500) revolutions per minute (rpm) rated speed. This Kinetix VP low inertia servo motor has an 18-bit absolute multi-turn digital encoder. Within 4096 (four thousand ninety-six) revolutions, this encoder is capable of providing position feedback to the device's user. This device has a smooth shaft, and it also has a single SpeedTec DIN connector. This connector is orientated at a right angle and is capable of being rotated 325º. The Allen-Bradley VPL-B1153F-PK14AA comes equipped with a 24 volt DC brake. There is an IEC Metric mounting flange located on the product, as well as Type FF mounting holes. The temperature range that this product can be operated with ranges from 0 to 40 °C (32 to 104 °F). 

The storage temperature range of the Allen-Bradley VPL-B1153F-PK14AA ranges from -30 to +40 ºC (-22 to +104 ºF). Additionally, the relative humidity of the product's storage area should be kept around 5% to 90% non-condensing. The storage atmosphere should be noncorrosive. 

Technical Specifications

MPN VPL-B1153F-PK14AA
Manufacturer Allen Bradley / Rockwell Automation
Series Kinetix VP Low Intertia Servo Motor
Voltage 400 V
Frame Size - Bolt Circle Diameter 115 mm
Magnet Stack Length 3
Rated Speed 4500 rpm
Feedback 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol)
Shaft Key Smooth shaft
Connector Single SpeedTec DIN connector, right angle, 325 degree rotatable
Brake 24V DC Brake
Mounting Flange IEC metric, free mounting holes (type FF)
Factory Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the VPL-B1153F-PK14AA?

Answer: Yes. We offer repairs for the VPL-B1153F-PK14AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and VPL-B1153F-PK14AA?

Answer: If you buy the VPL-B1153F-PK14AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the VPL-B1153F-PK14AA online?

Answer: Yes. Automation Stop sells the VPL-B1153F-PK14AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the VPL-B1153F-PK14AA?

Answer: The VPL-B1153F-PK14AA is made by Allen Bradley - Motors.


Question: What type of product is the VPL-B1153F-PK14AA?

Answer: The VPL-B1153F-PK14AA is part of the VPL Servo Motors series.


Question: What is the Brake of the Allen Bradley VPL-B1153F-PK14AA?

Answer: The Brake of the VPL-B1153F-PK14AA is 24 volts direct current Brake.


Question: What is the Connector of the VPL-B1153F-PK14AA?

Answer: The VPL-B1153F-PK14AA has a Connector of Single SpeedTec DIN connector, right angle, 325 degree rotatable .


Question: What Factory Options are included with the VPL-B1153F-PK14AA?

Answer: The VPL-B1153F-PK14AA has Factory Options Standard.


Question: What Feedback does the VPL-B1153F-PK14AA have?

Answer: The Rockwell Automation VPL-B1153F-PK14AA has a Feedback of 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).


Question: What is the Frame Size - Bolt Circle Diameter of the VPL-B1153F-PK14AA?

Answer: The Allen Bradley/Rockwell Automation VPL-B1153F-PK14AA has a Frame Size - Bolt Circle Diameter of 115 mm.


Question: What Magnet Stack Length does the VPL-B1153F-PK14AA have?

Answer: The VPL-B1153F-PK14AA has a Magnet Stack Length of 3.


Question: What Mounting Flange is included with the VPL-B1153F-PK14AA?

Answer: The VPL-B1153F-PK14AA has a IEC metric, free mounting holes (type FF) Mounting Flange.


Question: What is the Rated Speed of the VPL-B1153F-PK14AA?

Answer: The Rated Speed of the VPL-B1153F-PK14AA is 4500 revolutions per minute (RPM).


Question: What Shaft Key does the Allen Bradley Automation VPL-B1153F-PK14AA have?

Answer: The VPL-B1153F-PK14AA has a Smooth shaft Shaft Key.


Question: What is the Voltage of the VPL-B1153F-PK14AA?

Answer: The Voltage of the VPL-B1153F-PK14AA is 400 V.


Series information for VPL-B1153F-PK14AA

For additional information about VPL-B1153F-PK14AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-B1153F-PK14AA.

Revision Part # Also Known As Availability
VPL-B1153F-PK14AA/A VPL-B1153F-PK14AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • VPL-B1153F-PKI4AA
  • VPL-B11S3F-PK14AA
  • VPL-B11S3F-PKI4AA
  • VPL-B1I53F-PK14AA
  • VPL-B1I53F-PKI4AA
  • VPL-B1IS3F-PK14AA
  • VPL-B1IS3F-PKI4AA
  • VPL-BI153F-PK14AA
  • VPL-BI153F-PKI4AA
  • VPL-BI1S3F-PK14AA
  • VPL-BI1S3F-PKI4AA
  • VPL-BII53F-PK14AA
  • VPL-BII53F-PKI4AA
  • VPL-BIIS3F-PK14AA
  • VPL-BIIS3F-PKI4AA
  • VPL-81153F-PK14AA
  • VPL-81153F-PKI4AA
  • VPL-811S3F-PK14AA
  • VPL-811S3F-PKI4AA
  • VPL-81I53F-PK14AA
  • VPL-81I53F-PKI4AA
  • VPL-81IS3F-PK14AA
  • VPL-81IS3F-PKI4AA
  • VPL-8I153F-PK14AA
  • VPL-8I153F-PKI4AA
  • VPL-8I1S3F-PK14AA
  • VPL-8I1S3F-PKI4AA
  • VPL-8II53F-PK14AA
  • VPL-8II53F-PKI4AA
  • VPL-8IIS3F-PK14AA
  • VPL-8IIS3F-PKI4AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP