GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | VPL-B1306F-CJ14AA |
Series: | VPL Servo Motors |
Description:
The Allen-Bradley VPL-B1306F-CJ14AA VPL series low-inertia servo motor provides efficient solution to reduce the motor size and deliver a high continuous torque of 13.38 newton-meters, peak torque of 34.62 newton-meters, an output torque motor of 2.95 kilowatts and a high rated speed of 4500 revolutions per minute at 400 volts AC with 130 mm frame size. This Allen-Bradley VPL-B1306F-CJ14AA three-phase AC servo motor can be employed with the Allen-Bradley Kinetix 5500 drives and Kinetix 5700 dual-axis inverters. The Allen-Bradley VPL-B1306F-CJ14AA AC servo motor offers high-performance encoders with 18-bit resolution. This Allen-Bradley VPL-B1306F-CJ14AA AC servo motor reduces the motor connectivity to a single cable and connector by using 2090-CSxM1Dx cables with two digital integrated communication wire. This low-inertia AC servo motor can operate at a temperature range of 0 degrees to 40 degrees Celsius (32 degrees to 104 degrees Fahrenheit) for industrial applications.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley VPL-B1306F-CJ14AA VPL series low-inertia servo motor provides an efficient solution to reduce the motor size and deliver a high continuous torque of 13.38 newton-meters, peak torque of 34.62 newton-meters, an output torque motor of 2.95 kilowatts and a high rated speed of 4500 revolutions per minute at 400 volts AC with a 130 mm frame size. This Allen-Bradley VPL-B1306F-CJ14AA three-phase AC servo motor can be employed with the Allen-Bradley Kinetix 5500 drives and Kinetix 5700 dual-axis inverters. The Allen-Bradley VPL-B1306F-CJ14AA AC servo motor offers high-performance encoders with 18-bit resolution. This Allen-Bradley VPL-B1306F-CJ14AA AC servo motor reduces the motor connectivity to a single cable and connector by using 2090-CSxM1Dx cables with two digital integrated communication wire. This Allen-Bradley VPL-B1306F-CJ14AA VPL series low-inertia servo motor produces torque efficiently over a large speed range and includes very high energy rare-earth Allen-Bradley magnets to rapidly accelerate the motor.
The Allen-Bradley VPL-B1306F-CJ14AA includes an integral 24-volt DC brake. The Allen-Bradley VPL-B1306F-CJ14AA AC servo motor contains high-resolution encoders which can be used as a part of the Kinetix safe-off feature. The Allen-Bradley VPL-B1306F-CJ14AA MP series low-inertia servo motor has a single SpeedTec DIN connector which uses a single cable and permits flexible orientation of connectors. This Allen-Bradley VPL-B1306F-CJ14AA VPL series low-inertia servo motor has a keyed shaft configuration. This Allen-Bradley VPL-B1306F-CJ14AA VPL series low-inertia servo motor is designed to meet IP66 enclosure environmental rating and standard IEC 72-1 installing dimensions. It can operate at a temperature range of 0 degrees to 40 degrees Celsius (32 degrees to 104 degrees Fahrenheit) for industrial applications.
MPN | VPL-B1306F-CJ14AA |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Kinetix VP Low Intertia Servo Motor |
Voltage | 400 V |
Frame Size - Bolt Circle Diameter | 130 mm |
Magnet Stack Length | 6 |
Rated Speed | 4500 rpm |
Feedback | 18-bit absolute single-turn digital encoder (Hiperface DSL protocol) |
Shaft Key | Shaft key |
Connector | Single SpeedTec DIN connector, right angle, 325 degree rotatable |
Brake | 24V DC Brake |
Mounting Flange | IEC metric, free mounting holes (type FF) |
Factory Options | Standard |
Question: Does Automation Stop offer repairs on the VPL-B1306F-CJ14AA?
Answer: Yes. We offer repairs for the VPL-B1306F-CJ14AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and VPL-B1306F-CJ14AA?
Answer: If you buy the VPL-B1306F-CJ14AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the VPL-B1306F-CJ14AA online?
Answer: Yes. Automation Stop sells the VPL-B1306F-CJ14AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the VPL-B1306F-CJ14AA?
Answer: The VPL-B1306F-CJ14AA is made by Allen Bradley - Motors.
Question: What type of product is the VPL-B1306F-CJ14AA?
Answer: The VPL-B1306F-CJ14AA is part of the VPL Servo Motors series.
Question: What is the Brake of the Allen-Bradley VPL-B1306F-CJ14AA?
Answer: The Allen-Bradley VPL-B1306F-CJ14AA has a Brake of 24 volts DC Brake.
Question: What Connector does the VPL-B1306F-CJ14AA have?
Answer: The Connector of the Rockwell Automation VPL-B1306F-CJ14AA is Single SpeedTec DIN connector, right angle, 325 degree rotatable .
Question: What kind of Factory Options does the Allen Bradley Automation VPL-B1306F-CJ14AA have?
Answer: The VPL-B1306F-CJ14AA has Factory Options Standard.
Question: What is the Feedback of the VPL-B1306F-CJ14AA?
Answer: The Allen Bradley-Rockwell Automation VPL-B1306F-CJ14AA has a Feedback of 18-bit absolute single-turn digital encoder (Hiperface DSL protocol).
Question: What is the Frame Size - Bolt Circle Diameter of the VPL-B1306F-CJ14AA?
Answer: The Rockwell-Automation VPL-B1306F-CJ14AA has a Frame Size - Bolt Circle Diameter of 130 mm.
Question: What Magnet Stack Length does the Allen Bradley-Rockwell Automation VPL-B1306F-CJ14AA have?
Answer: The VPL-B1306F-CJ14AA has a Magnet Stack Length of 6.
Question: What Mounting Flange does the VPL-B1306F-CJ14AA have?
Answer: The VPL-B1306F-CJ14AA has a IEC metric, free mounting holes (type FF) Mounting Flange.
Question: What is the Rated Speed of the VPL-B1306F-CJ14AA?
Answer: The Rated Speed of the VPL-B1306F-CJ14AA is 4500 revolutions per minute (RPM).
Question: What Shaft Key is included with the Allen Bradley/Rockwell Automation VPL-B1306F-CJ14AA?
Answer: The Allen Bradley/Rockwell Automation VPL-B1306F-CJ14AA has a Shaft key Shaft Key.
Question: What is the Voltage of the VPL-B1306F-CJ14AA?
Answer: The Voltage of the VPL-B1306F-CJ14AA is 400 V.
For additional information about VPL-B1306F-CJ14AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-B1306F-CJ14AA.
Revision Part # | Also Known As | Availability |
---|---|---|
VPL-B1306F-CJ14AA/A | VPL-B1306F-CJ14AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.