GE / IP FANUC Series 90/30 In Stock

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1715-IB16D

✓ In Stock

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1715-IB16D
Series: 1715 Redundant I/O

Description:

The 1715-IB16D module is designed as a redundant input / output module. This module was designed and produced by Allen Bradley / Rockwell Automation. This module is a 16-point digital input module, and it is also a part of the 1715 series by Allen Bradley. It has a power dissipation rating of 4 watts and includes internal diagnostic and watchdog features. It is operable in simplex and duplex modes. The physical dimensions of this device measure 166 mm x 42 mm x 118 mm. This device has an approximate weight of 360 grams.


Key Features:

  • is a 16-point digital input module
  • utilizes 166 x 42 x 188 millimeters dimensions
  • provides an operating temperature of -25 to 70 degrees celsius

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$6,628.00

Available: 1

What is Original Packaging

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

The 1715-IB16D module was designed and manufactured by Allen Bradley / Rockwell Automation. This device is a 16-channel digital input module from the 1715 redundant I/O series. This device has galvanically separated input channels for safety and equipment protection. When used in combination alongside the simplex termination assembly 1715-TASIB16D, this digital input is not isolated. Internal diagnostic testing and a watchdog feature are included in the 1715-IB16D. It enables the replacement and removal of components while the unit is online, with no interruption of signals as long as the device is in duplex mode. The module may be configured to operate in either a simplex or duplex mode. The setup program allows you to pick the needed number of modules, as well as one of the two terminating assemblies. The device uses 260 milliamperes from the backplane at a voltage range of 18 to 32 volts DC. The slew rates are set at 3600 volts per second. The module has been tested at up to 500 volts for 60 seconds and has a constant isolation voltage of 50 volts. This unit's wire type is around twenty-two (22) to sixteen (16) AWG solid or stranded copper wire, as indicated by the manufacturer. The 1715-IB16D has a power dissipation of 4 watts and a field loop power dissipation of 0.2 watts. This unit may be installed on a DIN-rail or a panel mount. This module has dimensions that measure 166 millimeters x 42 millimeters x 118 millimeters, or 6.5 inches x 1.7 inches x 4.6 inches. The weight of this module is approximately 360 grams, or 0.79 pounds.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1715-IB16D?

Answer: Yes. We offer repairs for the 1715-IB16D and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1715-IB16D?

Answer: If you buy the 1715-IB16D through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1715-IB16D online?

Answer: Yes. Automation Stop sells the 1715-IB16D online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1715-IB16D?

Answer: The 1715-IB16D is made by Allen Bradley - PLC.


Question: What type of product is the 1715-IB16D?

Answer: The 1715-IB16D is part of the 1715 Redundant I/O series.


Series information for 1715-IB16D

For additional information about 1715-IB16D check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1715-IB16D.

Revision Part # Also Known As Availability
1715-IB16D/A 1715-IB16D Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1715-IB1GD
  • 1715-IBI6D
  • 1715-IBIGD
  • 1715-I816D
  • 1715-I81GD
  • 1715-I8I6D
  • 1715-I8IGD
  • 1715-1B16D
  • 1715-1B1GD
  • 1715-1BI6D
  • 1715-1BIGD
  • 1715-1816D
  • 1715-181GD
  • 1715-18I6D
  • 1715-18IGD
  • 171S-IB16D
  • 171S-IB1GD
  • 171S-IBI6D
  • 171S-IBIGD
  • 171S-I816D
  • 171S-I81GD
  • 171S-I8I6D
  • 171S-I8IGD
  • 171S-1B16D
  • 171S-1B1GD
  • 171S-1BI6D
  • 171S-1BIGD
  • 171S-1816D
  • 171S-181GD
  • 171S-18I6D
  • 171S-18IGD
  • 17I5-IB16D
  • 17I5-IB1GD
  • 17I5-IBI6D
  • 17I5-IBIGD
  • 17I5-I816D
  • 17I5-I81GD
  • 17I5-I8I6D
  • 17I5-I8IGD
  • 17I5-1B16D
  • 17I5-1B1GD
  • 17I5-1BI6D
  • 17I5-1BIGD
  • 17I5-1816D
  • 17I5-181GD
  • 17I5-18I6D
  • 17I5-18IGD
  • 17IS-IB16D
  • 17IS-IB1GD
  • 17IS-IBI6D
  • 17IS-IBIGD
  • 17IS-I816D
  • 17IS-I81GD
  • 17IS-I8I6D
  • 17IS-I8IGD
  • 17IS-1B16D
  • 17IS-1B1GD
  • 17IS-1BI6D
  • 17IS-1BIGD
  • 17IS-1816D
  • 17IS-181GD
  • 17IS-18I6D
  • 17IS-18IGD
  • I715-IB16D
  • I715-IB1GD
  • I715-IBI6D
  • I715-IBIGD
  • I715-I816D
  • I715-I81GD
  • I715-I8I6D
  • I715-I8IGD
  • I715-1B16D
  • I715-1B1GD
  • I715-1BI6D
  • I715-1BIGD
  • I715-1816D
  • I715-181GD
  • I715-18I6D
  • I715-18IGD
  • I71S-IB16D
  • I71S-IB1GD
  • I71S-IBI6D
  • I71S-IBIGD
  • I71S-I816D
  • I71S-I81GD
  • I71S-I8I6D
  • I71S-I8IGD
  • I71S-1B16D
  • I71S-1B1GD
  • I71S-1BI6D
  • I71S-1BIGD
  • I71S-1816D
  • I71S-181GD
  • I71S-18I6D
  • I71S-18IGD
  • I7I5-IB16D
  • I7I5-IB1GD
  • I7I5-IBI6D
  • I7I5-IBIGD
  • I7I5-I816D

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP