GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1734-EP24DC

✓ In Stock

1734-EP24DC Image 1 thumbnail
1734-EP24DC Image 2 thumbnail
1734-EP24DC Image 3 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1734-EP24DC
Series: Point I/O 1734
UPC: 10612598206879

Description:

Designed and produced by Allen Bradley, part number 1734-EP24DC is an expansion module that belongs to the POINT I/O product line. This device can have a total of 4 to 17 modules installed depending on the current rating of each module. The nominal input voltage is rated at 24 volts DC, with an input voltage range of 10 to 28.8 volts DC. The maximum inrush current of this device is 6 amperes for 10 milliseconds. It has physical dimensions that measure 76.2 mm x 25.4 mm x 133.4 mm.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$467.00

Available: 23

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$142.00

Available: 110

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$114.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1734-EP24DC? We can help!

Request a Quote

Key Features:

  • is a expansion power supply

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Product number 1734-EP24DC is an Allen Bradley POINT I/O expansion power supply. The I/O module capacity of this device is 4 to 17 modules depending on the current rating of each module. This expansion power supply has a nominal input voltage rating of 24 volts DC, with an input voltage range of 10 to 28.8 volts DC. The field side power requirements of this device is 24 volts DC, or 28.8 volts DC maximum, at 400 milliamperes maximum. The maximum inrush current of the Allen Bradley 1734-EP24DC POINT I/O expansion power supply is 6 amperes for 10 milliseconds. The maximum power consumption of this device is 9.8 watts at 28.8 volts DC, while the maximum power dissipation rating is 3.0 watts at 28.8 volts DC. This expansion power supply has a maximum thermal dissipation rating of 10.0BTU/hr at 28.8 volts DC. The isolation voltage of this Allen Bradley device is 50 volts when operated continuously. 

The Allen Bradley 1734-EP24DC POINT I/O expansion power supply should be operated within an environment where the temperature ranges from -20 to 55 degrees Celsius. When storing this device, however, the temperature of the surrounding area should range from -40 to 85 degrees Celsius. Additionally, the relative humidity should have levels that range from 5% to 95% and should be non-condensing. This POINT I/O expansion power supply has physical dimensions that measure 76.2 millimeters x 25.4 millimeters x 133.4 millimeters. The weight of this device is approximately 120 grams, or the equivalent of 4.3 ounces. 

Technical Specifications

Region of Manufacture* Singapore
Type Expansion Power Supply Module

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1734-EP24DC?

Answer: Yes. We offer repairs for the 1734-EP24DC and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1734-EP24DC?

Answer: If you buy the 1734-EP24DC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1734-EP24DC online?

Answer: Yes. Automation Stop sells the 1734-EP24DC online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1734-EP24DC?

Answer: The 1734-EP24DC is made by Allen Bradley - PLC.


Question: What type of product is the 1734-EP24DC?

Answer: The 1734-EP24DC is part of the Point I/O 1734 series.


Question: What Region of Manufacture* is included with the 1734-EP24DC?

Answer: The 1734-EP24DC has a Singapore Region of Manufacture*.


Series information for 1734-EP24DC

For additional information about 1734-EP24DC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-EP24DC.

Revision Part # Also Known As Availability
1734-EP24DC/A 1734-EP24DC Ser A, Series A, Rev A Request a Quote
1734-EP24DC/B 1734-EP24DC Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • I734-EP24DC

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP