GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1734-IB8

✓ In Stock

1734-IB8 Image 1 thumbnail
1734-IB8 Image 2 thumbnail
1734-IB8 Image 3 thumbnail
1734-IB8 Image 4 thumbnail
1734-IB8 Image 5 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1734-IB8
Series: Point I/O 1734
UPC: 10612598308573

Description:

The 1734-IB8 is a product of Allen Bradley. This device is a POINT I/O input module. This module has a total of 8 sinking inputs. This device has an on-state voltage range of 10 volts DC to 28.8 volts DC. Additionally, it has an on-state current range of 2 milliamperes to 5 milliamperes, with the nominal on-state voltage being 4 milliamperes at 24 volts DC. This input module is equipped with several LED indicators, such as 1 network status indicator, 1 module status indicator, and 8 input status indicators.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$120.00

Available: 8

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$95.00

Available: 28

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$76.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1734-IB8? We can help!

Request a Quote

Key Features:

  • comes with 24 volts dc of input voltage
  • has 56 x 12 x 75.5 mm (2.2 x 0.47 x 2.97 in.) dimensions

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 1734-IB8 is a POINT I/O input module. This module was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. It is a part of the Bulletin 1734 product line. This input module has a total of eight (8) inputs, in which all of the inputs are grouped together. These are classified as sinking inputs. This input module has a minimum on-state voltage rated at 10 volts DC, as well as a maximum on-state voltage rated at 28.8 volts DC. The nominal on-state voltage of this input module is 24 volts DC. The minimum on-state current, however, is rated at 2 milliamperes, while the maximum on-state current is rated at 5 milliamperes. This product has a nominal on-state current rated at 4 milliamperes at 24 volts DC. Part number 1734-IB8 has a maximum off-state voltage of 5 volts DC. Additionally, it has a minimum off-state current of 1.5 milliamperes. The nominal input impedance of the Allen Bradley 1734-IB8 POINT I/O input module is 3.6 kilo ohms, while the maximum input impedance is 4.7 kilo ohms. This input module is equipped with several LED, or light emitting diode, indicators. These indicators include one (1) green/red network status indicator, one (1) green/red module status indicator, and eight (8) yellow input status indicators. The maximum POINTBus current of this input module is 75 milliamperes at 5 volts DC. This Allen Bradley product has a maximum power dissipation of 1.6 watts at 28.8 volts DC. Additionally, this device has a maximum thermal dissipation of 5.5 BTU/hr at 28.8 volts DC. 

Technical Specifications

Region of Manufacture* Singapore
Type PLC Input Module

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1734-IB8?

Answer: Yes. We offer repairs for the 1734-IB8 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1734-IB8?

Answer: If you buy the 1734-IB8 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1734-IB8 online?

Answer: Yes. Automation Stop sells the 1734-IB8 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1734-IB8?

Answer: The 1734-IB8 is made by Allen Bradley - PLC.


Question: What type of product is the 1734-IB8?

Answer: The 1734-IB8 is part of the Point I/O 1734 series.


Question: What Region of Manufacture* does the Allen Bradley/Rockwell Automation 1734-IB8 have?

Answer: The Allen Bradley/Rockwell Automation 1734-IB8 has a Singapore Region of Manufacture*.


Series information for 1734-IB8

For additional information about 1734-IB8 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-IB8.

Revision Part # Also Known As Availability
1734-IB8/A 1734-IB8 Ser A, Series A, Rev A Request a Quote
1734-IB8/B 1734-IB8 Ser B, Series B, Rev B Request a Quote
1734-IB8/C 1734-IB8 Ser C, Series C, Rev C Request a Quote
1734-IB8/D 1734-IB8 Ser D, Series D, Rev D Request a Quote

Common Misspellings:

  • 1734-IBB
  • 1734-I88
  • 1734-I8B
  • 1734-1B8
  • 1734-1BB
  • 1734-188
  • 1734-18B
  • I734-IB8
  • I734-IBB
  • I734-I88
  • I734-I8B
  • I734-1B8
  • I734-1BB
  • I734-188
  • I734-18B

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP