GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1734-IE4S |
Series: | Point I/O 1734 |
UPC: | 10885630078578 |
Description:
The Allen-Bradley designed and manufactured 1734-IE4S is a POINT I/O Safety Analog Input Module with four analog inputs and four outputs. It features four single-ended/module inputs and may be configured with an input type of voltage, current, or tachometer, as well as bipolar or unipolar operation. This module has independent current-limited and monitored sensor power outputs, which are all monitored and controlled. The weight of this device is approximately 68 grams.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1734-IE4S, produced by Allen-Bradley, is a POINT I/O Safety Analog Input Unit with four analog input channels. This module features four inputs that are single-ended or module inputs, as well as input types such as voltage, current, and tachometer that may be used in either bipolar type or a unipolar configuration. A maximum of four sensors that measure voltage or current may be connected to this analog signal module for safety. It's crucial to remember that if you are utilizing over 1 power supply in conjunction with the 1734-IE4S, you must make certain that you do not surpass the device's highest isolation power.
Dual-channel equivalent mode is supported by the 1734-IE4S module. To utilize this mode, switch the 1734-IE4S to single-channel operation. The tachometer's frequency band is 1 and 1000 hertz, with a 1000 hertz over range. While it appears to be 20 milliamperes above the current over-limit barrier, the band of 0 and 20 milliamperes is acceptable, as well as between 4 and 20 milliamperes. The current underage threshold appears to be 0.5 milliamperes between 0 and 20 milliamperes and 4 milliamperes between 4 and 20 milliamperes, respectively. Part number 1734-IE4S has a weight of approximately sixty-eight (68) grams, which is equivalent to roughly 2.4 ounces. The physical dimensions of the Allen-Bradley 1734-IE4S measure 77 mm x 25 mm x 55 mm, or the equivalent of 3.03 inches x 0.98 inches x 2.17 inches.
Region of Manufacture* | United States |
Type | PLC Input Module |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 1734-IE4S?
Answer: Yes. We offer repairs for the 1734-IE4S and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1734-IE4S?
Answer: If you buy the 1734-IE4S through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1734-IE4S online?
Answer: Yes. Automation Stop sells the 1734-IE4S online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1734-IE4S?
Answer: The 1734-IE4S is made by Allen Bradley - PLC.
Question: What type of product is the 1734-IE4S?
Answer: The 1734-IE4S is part of the Point I/O 1734 series.
Question: What Region of Manufacture* does the Rockwell-Automation 1734-IE4S have?
Answer: The Rockwell-Automation 1734-IE4S has a United States Region of Manufacture*.
For additional information about 1734-IE4S check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-IE4S.
Revision Part # | Also Known As | Availability |
---|---|---|
1734-IE4S/A | 1734-IE4S Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.