GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1734-MB

✓ In Stock

1734-MB Image 1 thumbnail
1734-MB Image 2 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1734-MB
Series: Point I/O 1734

Description:

Designed and manufactured by Allen Bradley / Rockwell Automation, product number 1734-MB is a mounting base. This product belongs to the POINT I/O series of products. This device is typically used for connecting an I/O module to a controller. This mounting base is compatible with existing modules, adapters, and power supplies. This mounting base can be mounted via a DIN rail. This product weighs approximately 0.45 kilograms. The physical dimensions of this mounting base measure roughly 203 mm x 203 mm x 152 mm.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$18.00

Available: 405

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$15.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1734-MB? We can help!

Request a Quote

Key Features:

  • is a mounting base

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 1734-MB is classified as a mounting base. This mounting base was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This Allen Bradley mounting base belongs to the POINT I/O series of products. This products is typically used for connecting an I/O module to/on a controller. This Allen Bradley mounting base is compatible with various devices, such as an existing module, an adapter, and even a power supply. The 1734-MB mounting base is capable of being mounted via a DIN rail. When mounted, this Allen Bradley product provides inter connectivity between the POINTBus backplane communications and the field power-bus distribution. This inter connectivity is done via the eight (8)-contact removable base locking screws included with it. This product is equipped with a specialized locking mechanic. This mechanic allows for smooth and perfect interlocking on the DIN rail. This prevents the mounting base from being mounted incorrectly. The Allen Bradley 1734-MB mounting base is made up of six (6) different components. These components include an RTB (removable terminal block) removing handle, a removable terminal block (RTB), a mounting base, interlocking side pieces, a DIN rail locking screw, and a mechanical keying. The Allen Bradley 1734-MB mounting base has an approximate weight of 0.45 kilograms, or the equivalent of roughly one (1.0) pound. Additionally, this mounting base by Allen Bradley has physical dimensions that measure approximately 203 millimeters x 203 millimeters x 152 millimeters, or eight (8.0) inches x eight (8.0) inches x six (6.0) inches. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1734-MB?

Answer: Yes. We offer repairs for the 1734-MB and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1734-MB?

Answer: If you buy the 1734-MB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1734-MB online?

Answer: Yes. Automation Stop sells the 1734-MB online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1734-MB?

Answer: The 1734-MB is made by Allen Bradley - PLC.


Question: What type of product is the 1734-MB?

Answer: The 1734-MB is part of the Point I/O 1734 series.


Series information for 1734-MB

For additional information about 1734-MB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-MB.

Revision Part # Also Known As Availability
1734-MB/A 1734-MB Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1734-M8
  • I734-MB
  • I734-M8

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP