GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1734-OE2V

✓ In Stock

1734-OE2V Image 1 thumbnail
1734-OE2V Image 2 thumbnail
1734-OE2V Image 3 thumbnail
1734-OE2V Image 4 thumbnail
1734-OE2V Image 5 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1734-OE2V
Series: Point I/O 1734
UPC: 10612598269188

Description:

The 1734-OE2V is a POINT I/O 2 Voltage Output Analog Module by Allen-Bradley and Rockwell Automation. It has 2 single-ended, non-isolated, voltage outputs and a 14 bit resolution. This hardware has a 50 Volt continuous isolation voltage.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$587.00

Available: 14

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$252.00

Available: 29

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$202.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1734-OE2V? We can help!

Request a Quote

Key Features:

  • is a analog output module
  • utilizes a -20-55 celsius operating temperature

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1734-OE2V is a POINT I/O 2 Voltage Output Analog Module by Allen-Bradley and Rockwell Automation. It has 2 single-ended, non-isolated, voltage outputs and a 14 bit resolution. This hardware has a 50 Volt continuous isolation voltage. Output specifications for this module include a current load on voltage output of 3 milliAmps and a conversion rate of 20 microseconds. General specifications include a maximum POINTBus current of 75 milliAmps at 5 Volts DC and a maximum power dissipation of 1.0 Watt. Maximum thermal dissipation is 3.4 British Thermal Units (BTU) per hour and nominal external DC power supply voltage is 24 Volts DC. External DC power voltage range is 10…28.8 Volts DC and external DC power supply current is 35 milliAmps at 24 Volts DC (including outputs at 3 milliAmps). This module has approximate dimensions of 56 x 12 x 75.5 millimeters, or 2.21 x 0.47 x 2.97 inches; it’s approximate weight is 36 grams, or 1.27 ounces. This hardware has no enclosure type rating (open-style).

Environmental specifications include an operating temperature between -20 and 55 degrees Celsius and a nonoperating temperature between -40 and 85 degrees Celsius; relative humidity is 5% to 95%, non-condensing. The 1734-OE2V has a vibration rating of 5 g at 10…500 Hertz and is compliant with IEC60068-2-6. It has an operating shock rating of 30 g that is compliant with IEC 60068-2-27 and a nonoperating shock rating of 50 g that is compliant with IEC 60068-2-27. Emissions is compliant with IEC 61000-6-4 and ESD immunity is compliant with IEC61000-4-2.

Technical Specifications

Manufacturer: Allen-Bradley / Rockwell Automation
Outputs: 2 (Single-Ended, Non-Isolated, Voltage)
Resolution: 14 Bit
Isolation Voltage: 50 Volts, Continuous
Current Load On Voltage Output: 3 milliAmps
Conversion Rate: 20 microseconds
Maximum POINTBus Current: 75 milliAmps at 5 Volts DC
Maximum Power Dissipation: 1.0 Watt
Maximum Thermal Dissipation: 3.4 British Thermal Units (BTU) per hour
Nominal External DC Power Supply Voltage: 24 Volts DC
External DC Power Voltage Range: 10…28.8 Volts DC
External DC Power Supply Current: 35 milliAmps at 24 Volts DC (including outputs at 3 milliAmps)
Dimensions (Approx.): 56 x 12 x 75.5 millimeters (2.21 x 0.47 x 2.97 inches)
Weight (Approx.): 36 grams (1.27 ounces)
Enclosure Type Rating: None (Open-Style)
Operating Temperature: -20 to 55 degrees Celsius
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1734-OE2V?

Answer: Yes. We offer repairs for the 1734-OE2V and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1734-OE2V?

Answer: If you buy the 1734-OE2V through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1734-OE2V online?

Answer: Yes. Automation Stop sells the 1734-OE2V online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1734-OE2V?

Answer: The 1734-OE2V is made by Allen Bradley - PLC.


Question: What type of product is the 1734-OE2V?

Answer: The 1734-OE2V is part of the Point I/O 1734 series.


Question: What is the Conversion Rate: of the 1734-OE2V?

Answer: The Conversion Rate: of the 1734-OE2V is 20 microseconds.


Question: What is the Current Load On Voltage Output: of the 1734-OE2V?

Answer: The Rockwell-Automation 1734-OE2V has a Current Load On Voltage Output: of 3 milliAmps.


Question: What is the Dimensions (Approx.): of the 1734-OE2V?

Answer: The Dimensions (Approx.): of the 1734-OE2V is 56 x 12 x 75.5 millimeters (2.21 x 0.47 x 2.97 inch).


Question: Does the Allen Bradley/Rockwell Automation 1734-OE2V have a Enclosure Type Rating:?

Answer: None (Open-Style).


Question: What is the External direct current power supply Current: of the 1734-OE2V?

Answer: The External DC power supply Current: of the 1734-OE2V is 35 milliAmps at 24 Volts DC (including outputs at 3 milliAmps).


Question: What External direct current (DC) Power Voltage Range: does the 1734-OE2V have?

Answer: The External direct current Power Voltage Range: of the 1734-OE2V is 10…28.8 Volts direct current.


Question: What is the Isolation Voltage: of the 1734-OE2V?

Answer: The 1734-OE2V has a Isolation Voltage: of 50 Volts, Continuous.


Question: What Manufacturer: is included with the Allen-Bradley 1734-OE2V?

Answer: The 1734-OE2V has a Allen Bradley (AB) / Rockwell Automation Manufacturer:.


Question: What Maximum POINTBus Current: does the Allen Bradley Automation 1734-OE2V have?

Answer: The Maximum POINTBus Current: of the 1734-OE2V is 75 milliAmps at 5 Volts DC (direct current).


Question: What is the Maximum Power Dissipation: of the 1734-OE2V?

Answer: The Maximum Power Dissipation: of the Allen-Bradley 1734-OE2V is 1.0 Watt.


Question: What is the Maximum Thermal Dissipation: of the 1734-OE2V?

Answer: The Allen Bradley 1734-OE2V has a Maximum Thermal Dissipation: of 3.4 British Thermal Units (BTU) per hour.


Question: What is the Nominal External direct current power supply component Voltage: of the 1734-OE2V?

Answer: The Rockwell Automation 1734-OE2V has a Nominal External DC power supply component Voltage: of 24 Volts DC.


Question: What is the Operating Temperature: of the 1734-OE2V?

Answer: The Allen Bradley-Rockwell Automation 1734-OE2V has a Operating Temperature: of -20 to 55 degrees Celsius.


Question: Does the 1734-OE2V have a Outputs:?

Answer: 2 (Single-Ended, Non-Isolated, Voltage).


Question: What is the Resolution: of the 1734-OE2V?

Answer: The Resolution: of the Rockwell-Automation 1734-OE2V is 14 Bit.


Question: What is the Weight (Approx.): of the 1734-OE2V?

Answer: The Weight (Approx.): of the 1734-OE2V is 36 grams (1.27 ounces).


Series information for 1734-OE2V

For additional information about 1734-OE2V check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-OE2V.

Revision Part # Also Known As Availability
1734-OE2V/A 1734-OE2V Ser A, Series A, Rev A Request a Quote
1734-OE2V/B 1734-OE2V Ser B, Series B, Rev B Request a Quote
1734-OE2V/C 1734-OE2V Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • 1734-0E2V
  • I734-OE2V
  • I734-0E2V

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP