GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1734-RTBS |
Series: | Point I/O 1734 |
UPC: | 10612598207357 |
Description:
Part number 1734-RTBS is a POINT I/O replacement removable terminal block (RTB) and is a product of Allen Bradley. This RTB supports a wire size ranging from 22 to 14 AWG. This device has a maximum signal terminal current of 2 amperes. Additionally, the isolation voltage is rated at 250 volts. this RTB has a basic isolation type. This product can be mounted via a DIN rail mount. It weighs approximately 8 grams and has physical dimensions measuring 65 mm x 12 mm x 160 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, part number 1734-RTBS is a POINT I/O replacement RTB, or removable terminal block. The maximum signal terminal current of this RTB is two (2) amperes. The isolation voltage of this device is 250 volts. This RTB has a basic isolation type. The wire size appropriate for this removable terminal block is 22 to 14 American Wire Gauge (AWG), or the equivalent of 0.34 to 2.1 mm². The wire may be stranded or solid. This Allen Bradley replacement removable terminal block has a weight of approximately eight (8) grams. This RTB is an open style device and can be mounted via a DIN rail mount. This removable terminal block has physical dimensions that measure 65 millimeters x 12 millimeters x 160 millimeters, or the equivalent of 2.56 inches x 0.472 inches x 6.25 inches (height x width x depth).
The temperature of the area surrounding the Allen Bradley 1734-RTBS POINT I/O replacement RTB should range from -20 degrees Celsius to 55 degrees Celsius, or the equivalent temperature range of -4 degrees Fahrenheit to 131 degrees Fahrenheit. Additionally, the temperature of the surrounding area when this device is not operating, or is being stored, should range from -40 degrees Celsius to 85 degrees Celsius, or -40 degrees Fahrenheit to 185 degrees Fahrenheit. The relative humidity should range from 5% to 95% and be non-condensing. This RTB can withstand a vibration rated at 5 G at a frequency of 10 to 500 hertz. Additionally, it can withstand an operating shock rated up to 30 G, as well as a non-operating shock rated up to 50 G.
Question: Does Automation Stop offer repairs on the 1734-RTBS?
Answer: Yes. We offer repairs for the 1734-RTBS and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1734-RTBS?
Answer: If you buy the 1734-RTBS through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1734-RTBS online?
Answer: Yes. Automation Stop sells the 1734-RTBS online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1734-RTBS?
Answer: The 1734-RTBS is made by Allen Bradley - PLC.
Question: What type of product is the 1734-RTBS?
Answer: The 1734-RTBS is part of the Point I/O 1734 series.
For additional information about 1734-RTBS check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-RTBS.
Revision Part # | Also Known As | Availability |
---|---|---|
1734-RTBS/A | 1734-RTBS Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.