GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1745-C3 |
Series: | 1745 |
Description:
The Allen Bradley 1745-C3 is a connection cable. It is used for expanding the reach of different industrial machinery. This connection cable requires two separate cables for establishing connection between the expansion unit and the processor unit. The 1745-C3 is available in two different variations: with a 10-pin connector and with a 20-pin connector. This connection cable is supplied with the SLC 150 processor unit. The 1745-C3 is a connection cable that comes with both the expansion units.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 1745-C3 is a connection cable that has a length of 18.5 inches, which is equivalent to 47 centimeters in length. It is part of the Series A line of connection cables from Allen Bradley. For the best performance, it is advised that users do not use a wire that is longer than the recommended measurement. If you use longer cables, it can affect the integrity of the communication. Furthermore, it can lead to unsafe connection between the processor and the expansion module. There are 10 pin connectors on each end of the connector. Similarly, if using a 20-pin connector, each end of the cable will feature 20-pins.
The Allen Bradley 1745-C3 features black keys. These black keys successfully pair with the expansion unit on the key slot. On the other hand, the white keys successfully pair with the expansion unit on the key slot. For faster processing and quick response, the 1745-C3 comes with the SLC 150 processor unit. The estimated shipping weight of this connection cable is 2.1 ounces, or the equivalent of 0.1 kilograms. This shipping dimension of this connection cable is 0.0 inches x 0.0 inches x 18.0 inches (0.0 centimeters x 0.0 centimeters x 45.7 centimeters). As mentioned prior, this connection cable comes in two variations: a 10 pin connector and a 20 pin connector. It has an IMS Product Code of 1747305. These connection cables are sold individually. The Allen Bradley 1745-C3 belongs to the family of SLC 100 line of connectors.
Question: Does Automation Stop offer repairs on the 1745-C3?
Answer: Yes. We offer repairs for the 1745-C3 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1745-C3?
Answer: If you buy the 1745-C3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1745-C3 online?
Answer: Yes. Automation Stop sells the 1745-C3 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1745-C3?
Answer: The 1745-C3 is made by Allen Bradley - PLC.
For additional information about 1745-C3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1745-C3.
Revision Part # | Also Known As | Availability |
---|---|---|
1745-C3/A | 1745-C3 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.