GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1746-OB16 |
Series: | SLC 500 |
UPC: | 10662468067055 |
Description:
Part number 1746-OB16, which was produced and manufactured by Allen-Bradley, is a DC output module. This output module, which belongs in the SLC 500 product line, has 1 (one) group of 16 (sixteen) output channels. This device provides signal voltages of twenty-four (24) volts direct current, or DC. It also has an output voltage range of ten (10) to fifty (50) volts direct current. The temperature range that is recommended for this product's operation is to be maintained in a range of zero (0) to sixty (60) ºC, or 32 to 140 ºF. Additionally, a non-operating temperature range for this device should be maintained between negative forty (-40) and positive eighty-five (85) degrees Celsius, or-40 to 185 ºF.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1746-OB16 is an SLC 500 DC Output Module, produced by Allen-Bradley. This output module is capable of communicating with various products found within the SLC 500 product line. This module is equipped with 16 (sixteen) output channels and provides signal voltages of twenty-four (24) volts direct current, or DC. The Allen-Bradley 1746-OB16 is primarily used to control, either manually or automatically, different controls or processes of various industrial machines. The output voltage range of this device is between ten (10) and fifty (50) volts direct current, or DC. The Allen-Bradley 1746-OB16 has a couple of different backplane current consumption stats. At five (5) volts DC, the backplane current consumption of this device is 0.280 amperes. At twenty-four (24) volts direct current (DC), however, the backplane current consumption is 0.0 amperes. The maximum Off-state leakage of this product is one (1) mA and the minimum load current is also one (1) mA.
The continuous current per point of the Allen-Bradley 1746-OB16 is 0.50 amperes at thirty degrees Celsius (30 °C), or 86 °F, and 0.25 amperes at sixty (60) °C, or 140 ºF. The continuous current per module maximum is 8.0 amps at 30 °C (86 °F) and 4.0 amps at 60 °C (140 °F). The max On-state voltage drop for this output module is 1.2 volts at 0.50 amps. Additionally, the surge current per point for the Allen-Bradley 1746-OB16 is 3.0 amps for 10 milliseconds. The temperature range recommended for the operation of this output module should remain within a range of zero (0) to sixty (60) °C, or thirty-two (32) to one hundred and forty (140) °F. Additionally, a non-operating temperature for this device should stay within a range of -40 and 85 °C (-40 to 185 °F). The operating humidity of the Allen-Bradley 1746-OB16 is between 5% and 95% non-condensing. The isolation of this output module is 1500 volts.
Region of Manufacture* | United States |
UNSPSC | 32151705 |
Type | PLC Output Module |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 1746-OB16?
Answer: Yes. We offer repairs for the 1746-OB16 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1746-OB16?
Answer: If you buy the 1746-OB16 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1746-OB16 online?
Answer: Yes. Automation Stop sells the 1746-OB16 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1746-OB16?
Answer: The 1746-OB16 is made by Allen Bradley - PLC.
Question: What type of product is the 1746-OB16?
Answer: The 1746-OB16 is part of the SLC 500 series.
Question: What Region of Manufacture* does the 1746-OB16 have?
Answer: The Allen Bradley-Rockwell Automation 1746-OB16 has a United States Region of Manufacture*.
Question: What UNSPSC does the 1746-OB16 have?
Answer: The Allen Bradley 1746-OB16 has a UNSPSC of 32151705.
For additional information about 1746-OB16 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1746-OB16.
Revision Part # | Also Known As | Availability |
---|---|---|
1746-OB16/A | 1746-OB16 Ser A, Series A, Rev A | Request a Quote |
1746-OB16/B | 1746-OB16 Ser B, Series B, Rev B | Request a Quote |
1746-OB16/C | 1746-OB16 Ser C, Series C, Rev C | Request a Quote |
1746-OB16/D | 1746-OB16 Ser D, Series D, Rev D | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.