GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Allen Bradley - PLC |
| Product Type: | PLC/Programmable Logic Controller |
| Part Number: | 1746-OB32E |
| Series: | SLC 500 |
Description:
This Allen-Bradley SLC 500 Digital DC Output Module comes with 32 outputs. It has a voltage range of 10-30V DC and can be installed in any 1746 I/O chassis. The operating vibrating is 2.5g at 57-2000Hz and comes with LED light indicators. It has a continuous current per point of 500mA at 30�Cand 250mA at 60�C and weighs around 30gm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a 1746-OB32E? We can help!
Request a QuoteKey Features:
- is a digital dc output module
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The electronically protected module 1746-OB32E protects the module from faults such as current overload or a short circuit. The unit is triggered by a thermal response and cuts out the supply. This response is very fast and the current supply is curbed within a time of the order of milliseconds after a temperature threshold is met. While the amps are controlled, all the remaining channels remain operational and in communication with the controller or processor of the module. The protection is not possible in case the polarity is reversed during the alternate current power source wiring. This electronic protection layer is not in lieu of physical devices such as the fuse, circuit breakers or other safety devices required by the code for protection of the device. Being electronic, the protective module goes a step further by automatically resetting a trip due to overload. The temperature is allowed to decrease after limiting the current before resetting. If there are any physical fuses tripped during the same event they have to be reset manually. In case of short circuit or overload current trip, the E-Fuse LED will light up using 5 Volts of direct current through the backplane and load power from an external source. The module has a maximum limit on continuous current per common of 4 Amperes at 0 to 60 degrees Celsius and continuous current per common pin of 2 Amperes for the same temperature range. It dissipates heat of 0.25 Watts per point with a minimum of 0.95 Watts and total of 8.95 Watts.
Technical Specifications
| Voltage category | 24 Volts |
| Number of outputs | 32 |
| Points per common | 16 |
| Operating voltage | 10-30 Volts direct current source |
| backplane current consumption | 5 Volts at 0.190 Amperes, 24 Volts at 0 Amperes |
| Isolation from backplane | 1500 Volts AC for 1 min |
| Off state leakage (min) | 1 milliampere |
| Load current (min.) | 1 milliampere |
| Continuous current per module (max.) | 8.0 Amperes at 0 to 60°C |
| Continuous current per point (max) | At 30°C, 0.50 Amperes, At 60°C, 0.25 Amperes |
| On state voltage drop (max) | 1.2 Volts at 0.5 Amperes |
| Surge current per point | At 30°C, 1.0 Ampere for 10 ms, At 60°C, 1.0 Ampere for 10 ms |
FAQ
Question: Does Automation Stop offer repairs on the 1746-OB32E?
Answer: Yes. We offer repairs for the 1746-OB32E and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1746-OB32E?
Answer: If you buy the 1746-OB32E through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1746-OB32E online?
Answer: Yes. Automation Stop sells the 1746-OB32E online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1746-OB32E?
Answer: The 1746-OB32E is made by Allen Bradley - PLC.
Question: What type of product is the 1746-OB32E?
Answer: The 1746-OB32E is part of the SLC 500 series.
Question: What is the backplane current consumption of the Allen Bradley Automation 1746-OB32E?
Answer: The Allen Bradley Automation 1746-OB32E has a backplane current consumption of 5 Volts at 0.190 Amperes, 24 Volts at 0 Amperes.
Question: What is the Continuous current per module (max.) of the 1746-OB32E?
Answer: The Continuous current per module (max.) of the Allen Bradley/Rockwell Automation 1746-OB32E is 8.0 Amperes at 0 to 60°C.
Question: What is the Continuous current per point (max) of the 1746-OB32E?
Answer: The Rockwell Automation 1746-OB32E has a Continuous current per point (max) of At 30°C, 0.50 Amperes, At 60°C, 0.25 Amperes.
Question: What Isolation from backplane does the 1746-OB32E have?
Answer: The Allen Bradley Automation 1746-OB32E has a Isolation from backplane of 1500 Volts AC (alternating current) for 1 min.
Question: What Load current (min.) does the Rockwell Automation 1746-OB32E have?
Answer: The Rockwell Automation 1746-OB32E has a Load current (min.) of 1 milliampere.
Question: What is the Number of outputs of the 1746-OB32E?
Answer: The 1746-OB32E has a Number of outputs of 32.
Question: What is the Off state leakage (min) of the 1746-OB32E?
Answer: The Off state leakage (min) of the 1746-OB32E is 1 milliampere.
Question: What is the On state voltage drop (max) of the 1746-OB32E?
Answer: The On state voltage drop (max) of the 1746-OB32E is 1.2 Volts at 0.5 Amperes.
Question: What Operating voltage does the 1746-OB32E have?
Answer: The 1746-OB32E has a Operating voltage of 10-30 Volts direct current source.
Question: What is the Points per common of the 1746-OB32E?
Answer: The 1746-OB32E has a Points per common of 16.
Question: What is the Surge current per point of the 1746-OB32E?
Answer: The Surge current per point of the 1746-OB32E is At 30°C, 1.0 Ampere for 10 ms, At 60°C, 1.0 Ampere for 10 ms.
Question: What is the Voltage category of the 1746-OB32E?
Answer: The Voltage category of the 1746-OB32E is 24 Volts.
Series information for 1746-OB32E
For additional information about 1746-OB32E check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1746-OB32E.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 1746-OB32E/A | 1746-OB32E Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
- 1746-O832E
- 1746-0B32E
- 1746-0832E
- 174G-OB32E
- 174G-O832E
- 174G-0B32E
- 174G-0832E
- I746-OB32E
- I746-O832E
- I746-0B32E
- I746-0832E
- I74G-OB32E
- I74G-O832E
- I74G-0B32E
- I74G-0832E
