GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1747-DPS1 |
Series: | SLC 500 |
UPC: | 10781180885430 |
Description:
The Allen-Bradley 1747-DPS1 is a Configurable Port Splitter Unit that can be employed with FlexLogix, PLC 5, MicroLogix, SLC 500, ControlLogix, and CompactLogix devices. This device helps to divide a single RS-232/DF1 duplex communication port into two individual separated ports for two external devices. The 1747-DPS1 operates at a temperature range of zero (0) degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) and weighs approximately 168 grams (0.37 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1747-DPS1 is a Configurable Port Splitter Unit that can be employed with FlexLogix, PLC 5, MicroLogix, SLC 500, ControlLogix, and CompactLogix devices. This device helps to divide a single RS-232/DF1 duplex communication port into two individual separated ports for two external devices. The 1747-DPS1 port can be configured for different communication protocols such as DH-485, DF1 full-duplex, or half-duplex protocols. This port splitter draws a current of 100 milliamperes at a voltage of 24 Volts DC. The device can be supplied with a voltage of 24 Volts DC. The unit is portable and small in size. This port splitter can be easily installed on a DIN rail. The 1747-DPS1 includes a programming and configurable port that employed a 9-Pin Male D-Shell Connector and contains also an 8-Pin DIN DF1 Full-Duplex Connector port.
The 1747-DPS1 offers an autobaud speed data of either 19.2 kilobits per second or 38.4 kilobits per second. This port splitter provides an auto checksum for either the CRC or BCC mode. The device has four (4) faceplate LED indicators to indicate status updates. This module is sensitive to ESD. This port splitter supports a non-condensing relative humidity range from 5 percent to 95 percent. The device provides electrical isolation by employing optocouplers between communication ports. The port splitter contains a PROG/HMI port that can be employed with either HMI devices (VersaView, PanelView Plus, and PanelView terminals) or a programming station. The 1747-DPS1 operates at a temperature range of zero (0) degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) and weighs approximately 168 grams (0.37 pounds) while shipping.
Brand | Allen-Bradley / Rockwell Automation |
Series | SLC 500 |
Part Number | 1747-DPS1 |
Description | Configurable Port Splitter |
Voltage Rating | 24 Volts DC |
Current Rating | 100 milliamperes |
Baud rate | Auto 19.2/38.4 Kbps |
Connector | 9-Pin Male D-Shell for PROG/HMI port and 8-Pin DIN DF1 Full-Duplex Connector port |
Mounting Style | DIN Rail |
Compatible Devices | SLC 500, PLC 5, MicroLogix, ControlLogix, CompactLogix, and FlexLogix devices |
Status Indicators | Four (4) |
Cable | Belden 9463 |
Communication Ports | RS-232/DF1 |
Operating Temperature | 0-60 degrees Celsius |
Weight | 168 grams (0.37 pounds) |
Question: Does Automation Stop offer repairs on the 1747-DPS1?
Answer: Yes. We offer repairs for the 1747-DPS1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1747-DPS1?
Answer: If you buy the 1747-DPS1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1747-DPS1 online?
Answer: Yes. Automation Stop sells the 1747-DPS1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1747-DPS1?
Answer: The 1747-DPS1 is made by Allen Bradley - PLC.
Question: What type of product is the 1747-DPS1?
Answer: The 1747-DPS1 is part of the SLC 500 series.
Question: What Baud rate does the Allen-Bradley 1747-DPS1 have?
Answer: The Baud rate of the Allen-Bradley 1747-DPS1 is Auto 19.2/38.4 Kbps.
Question: What Brand is included with the 1747-DPS1?
Answer: The Rockwell-Automation 1747-DPS1 has a Allen Bradley / Rockwell Automation Brand.
Question: What Cable does the Allen Bradley Automation 1747-DPS1 have?
Answer: The Allen Bradley Automation 1747-DPS1 has a Cable of Belden 9463.
Question: What is the Communication Ports of the 1747-DPS1?
Answer: The Communication Ports of the Allen Bradley 1747-DPS1 is RS-232/DF1.
Question: What is the Compatible Devices of the Rockwell-Automation 1747-DPS1?
Answer: The Compatible Devices of the 1747-DPS1 is SLC 500, PLC 5, MicroLogix, ControlLogix, CompactLogix, and FlexLogix devices.
Question: What Connector does the 1747-DPS1 have?
Answer: The Connector of the 1747-DPS1 is 9-Pin Male D-Shell for PROG/HMI port and 8-Pin DIN DF1 Full-Duplex Connector port.
Question: What Current Rating does the 1747-DPS1 have?
Answer: The Current Rating of the Rockwell Automation 1747-DPS1 is 100 milliamperes.
Question: What Description does the 1747-DPS1 have?
Answer: The Allen-Bradley 1747-DPS1 has a Configurable Port Splitter Description.
Question: What Mounting Style is included with the Allen Bradley 1747-DPS1?
Answer: The Allen Bradley 1747-DPS1 has a DIN Rail Mounting Style.
Question: What Operating Temperature does the 1747-DPS1 have?
Answer: The 1747-DPS1 has a Operating Temperature of 0-60 degrees Celsius.
Question: What is the component Number of the 1747-DPS1?
Answer: The Allen Bradley/Rockwell Automation 1747-DPS1 has a part Number of 1747-DPS1.
Question: What is the Status Indicators of the 1747-DPS1?
Answer: The Status Indicators of the 1747-DPS1 is Four (4).
Question: What is the Voltage Rating of the 1747-DPS1?
Answer: The Allen Bradley-Rockwell Automation 1747-DPS1 has a Voltage Rating of 24 Volts DC (direct current).
Question: What is the Weight of the 1747-DPS1?
Answer: The Allen Bradley-Rockwell Automation 1747-DPS1 has a Weight of 168 grams (0.37 pounds).
For additional information about 1747-DPS1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1747-DPS1.
Revision Part # | Also Known As | Availability |
---|---|---|
1747-DPS1/A | 1747-DPS1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.